What does turning on the parking lights and hazard lights mean?

1 Answers
Anastasia
07/30/25 6:51am
The meaning of turning on the parking lights and hazard lights is that the car has broken down and needs rescue during night or in rainy and foggy weather. Here are some related extended contents: The function of hazard lights: They can alert other vehicles in case of breakdown, accident or emergency; turn on the hazard lights when parking on the roadside to avoid rear-end collisions. Maintenance methods for car lights: Check the sealing of the headlights, and replace the sealing ring between the lens and reflector in time if it is damaged; clean the dust on the bulb with degreasing cotton soaked in ethanol, and let it dry after cleaning without touching the bulb with hands or cloth; clean the reflector by dipping clean cotton in hot water for cleaning, do not wipe it to avoid damaging the reflective coating.
Was this review help?
5
5
Share
More Forum Discussions

What does EPC mean on Volkswagen cars?

EPC on Volkswagen cars stands for Electronic Power Control, which refers to the electronic throttle. The EPC light is an indicator that illuminates when there may be a fault in the electronic throttle system, and the fault could affect the normal operation of the vehicle. The EPC light on the dashboard indicates: 1. Intake system failure, such as leaks or blockages; 2. Dirty throttle body, excessive carbon buildup; 3. Substandard fuel selection; 4. Abnormal cylinder pressure, poor operating conditions; 5. Valve failure, sticking or carbon buildup; 6. EPC fault; 7. Sporadic faults, false alarms.
10
4
Share

What are the signs that a car battery needs replacement?

Car batteries need replacement when they have insufficient charge or are faulty. Battery maintenance methods include: 1. Charge promptly when the ammeter indicates low charge; 2. Adjust electrolyte density according to regional and seasonal standards; 3. Add distilled water or special replenishing fluid when electrolyte is low; 4. Limit engine cranking to 5 seconds maximum per attempt; 5. Start the vehicle periodically if the battery remains unused for extended periods; 6. Regularly check that the battery vent holes remain unobstructed; 7. Inspect battery terminals for oxidation; 8. Examine all electrical circuits for aging or short-circuiting.
2
4
Share

When will the country implement the China VI standard?

It is planned to be uniformly implemented nationwide in 2020 and 2023 respectively. The following is a related introduction to the emission standards: 1. Introduction to emission standards: Emission standards refer to the regulations on the content of harmful gases such as carbon monoxide, hydrocarbons, nitrogen oxides, particulate matter, and carbon smoke emitted from vehicle exhaust. These standards are established to prevent environmental pollution caused by exhaust emissions from compression-ignition and gas-fueled ignition engines, protect the ecological environment, and safeguard human health. 2. Technical measures: To stably meet the vehicle emission standards, vehicles must be equipped with technical measures that ensure pollutant emissions comply with the national standards, and they must use fuel that meets the standards.
16
2
Share

Does the Honda Jade have a China 6 compliant model?

Honda Jade does not have a China 6 compliant model. Below is relevant knowledge about the China 6 emission standard: Definition of China 6 Emission Standard: The China 6 Emission Standard, also known as the National Sixth Stage Emission Standard for Motor Vehicles, is an upgrade from the China 5 standard. It requires a reduction of over 50% in carbon monoxide emissions and total hydrocarbons compared to the previous standard. Phases of China 6 Emission Standard: The China 6 standard is divided into two phases: 6A and 6B. Compared to China 6A, China 6B imposes stricter requirements on the emissions of carbon monoxide, non-methane hydrocarbons, nitrogen oxides, and PM (particulate matter).
9
0
Share

Buzzing Sound When Accelerating Disappears Upon Releasing the Throttle?

Detailed explanation and solutions for the phenomenon where a buzzing sound occurs when accelerating and disappears upon releasing the throttle are as follows: 1. Component Damage: It could be due to a faulty fuel pump or clutch release bearing in the car. Solution: Have it inspected and repaired at a repair shop, replacing the damaged components. 2. Installation Error: Check if there is any air leakage in the engine's intake pipe, whether the air filter is installed correctly, and observe where exactly the buzzing sound is coming from. If it's on the right side of the engine, it's likely an issue with the engine belt; if it's on the left, it could be a problem with the throttle valve. Solution: Perform repairs and adjustments based on the identified issues.
10
5
Share

Does the Tayron have 4WD?

Volkswagen Tayron offers 4WD models equipped with Volkswagen's 4MOTION intelligent all-wheel-drive system. Here are some key features of this vehicle: 1. This 4WD system utilizes BorgWarner's fifth-generation electronically controlled multi-plate clutch center differential, capable of delivering 100% rear-wheel power output under extreme conditions, ensuring excellent off-road performance. The Tayron also provides four on-road driving modes, two off-road modes, and one snow mode. 2. As a premium German mid-size SUV produced by FAW-Volkswagen, the Tayron offers four powertrain options: 280TSI, 330TSI, 380TSI, with both 2WD and 4WD configurations available.
13
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.