What does Trumpchi mean?

1 Answers
VanMackenzie
07/30/25 10:32am
Trumpchi is not a car model, but the English name of GAC Trumpchi. GAC Trumpchi's English name is Trumpchi, a domestic brand created by GAC Group to enhance its core competitiveness and achieve sustainable development. In December 2010, its first car, the Trumpchi GA5 sedan, was successfully launched in the market, followed by multiple models. In 2017, GAC Trumpchi's sales reached 508,600 units, a year-on-year increase of 37%. Expansion: GAC Trumpchi has the capability to compete with joint-venture brands and imported brands of the same level in terms of technology, configuration, and quality. As a pioneer of independent brands, it continues to impact the mid-to-high-end market.
Was this review help?
11
1
Share
More Forum Discussions

What is the reason why the one-button start suddenly cannot turn off the engine?

One-button start suddenly cannot turn off the engine due to reasons such as the idle switch not closing, idle control valve failure, intake pipe leakage, etc. The details are as follows. Idle switch not closing: If the engine speed does not increase when the air conditioner is turned on at idle, it can be proven to be this fault. The throttle position sensor can be adjusted, repaired, or replaced. Idle control valve failure: Check the operating sound of the idle control valve. If there is no operating sound, it means the idle control valve has failed. The idle control valve can be cleaned or replaced, and the idle speed can be set using a special decoder. Intake pipe leakage: If a hissing sound of leakage is heard in the intake pipe, it proves that the intake system is leaking. The leakage point can be found, and the system can be resealed or related components can be replaced.
20
0
Share

How Many Times Should You Press the One-Button Start to Turn Off the Engine?

When in P gear, press once to directly turn off the engine and cut power; when in N gear, press once to turn off the engine but not cut power—you need to shift to P gear and press twice to cut power. Important Note: If an emergency occurs while the vehicle is in motion, you can turn off the engine by pressing the one-button start for more than 3 seconds or pressing it three times consecutively. In this case, the power switches to ACC mode. The correct steps to turn off the engine using the one-button start are as follows: Press the brake, bring the vehicle to a complete stop, and shift from D gear to N gear. Engage the handbrake (if it's an electronic handbrake, simply pull it up). Release the foot brake but do not turn off the power—this is to confirm that the vehicle comes to a complete stop under the handbrake's effect and to prevent the P gear from locking. Continue pressing the foot brake, shift from N gear to P gear, release the foot brake, press the one-button start, and the power will turn off, completing the engine shutdown.
7
0
Share

How many seconds count as stopping in Subject 2?

In Subject 2, a pause of 2 seconds is considered an intermediate stop. During the Subject 2 test, most items require continuous operation without stopping, otherwise the test will be judged as a failure. Principle: The test vehicle's wheels are equipped with sensors; an intermediate stop, meaning the speed is 0, will be detected if the pause exceeds 2 seconds during the test, and the sensor will feedback to the computer, resulting in a failed test. Solution: Generally, the instructor will take the examinee to familiarize themselves with the test site in advance. The size of the test site is similar to the practice field, so getting familiar with the road conditions and finding the right points in advance is sufficient. Additionally, during the Subject 2 test, although the speed should be slow, it should not be too slow; maintaining the usual practice speed is recommended.
2
0
Share

What are the reasons for no response when pressing the one-touch start button?

Issues with the car key, gear not in P position, and not pressing the brake can cause the one-touch start to not respond. Car key issues: For example, the key battery is dead, or the key's radio waves are being interfered with, etc. Frequently placing the car key near electronic devices such as mobile phones, computers, or TVs can easily cause interference with the low-intensity radio waves in the key, making it difficult for the car's sensor to detect it. In such cases, the one-touch start will not respond. Gear not in P position: Currently, most car models cannot start if the gear is not in the P position. This is a safety feature designed by manufacturers to prevent the car from starting when the gear is in D or R position. Not pressing the brake: Many cars require the brake to be pressed for the one-touch start to activate the engine. If the brake is not pressed, only the car's electrical circuits are connected, which is also a safety consideration in the design. Solutions for no response when pressing the one-touch start button: For car key issues, replace the key battery or move away from the interference area. If the gear is not in P position, shift it to P and restart. If the brake is not pressed, press the brake to start.
17
1
Share

What does the car OBD port mean?

The car OBD port refers to the on-board diagnostic system. By connecting to the OBD port, you can view real-time car data, detect car faults, and facilitate car repairs, development of car-related functions, and modification of car equipment. The car OBD port is an interface on the car similar to a power socket. Simply put, its function is to allow technicians to connect a computer to the OBD port and access vehicle information and status. For example, if the vehicle has a fault code, the maintenance personnel only need to connect a computer to the OBD interface to determine where the problem lies and proceed with repairs.
13
2
Share

What color is automotive primer generally?

Automotive primer is generally black, white, or gray, with gray being the most commonly used on vehicles. If the primer becomes exposed, it needs to be repaired. When primer is exposed, the extent of the damage should be assessed. If the primer hasn't been scraped off, only the topcoat needs to be repaired. If the primer is damaged, maintenance is required. If not addressed promptly, the car's surface may rust. Solvent-based automotive primers primarily use nitrocellulose resin, epoxy resin, alkyd resin, amino resin, or phenolic resin as the base material. Pigments such as iron oxide red, titanium white, carbon black, and other fillers are used. The application methods include spraying and dip coating.
1
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.