What does 'Transmission temperature high, please park safely' mean?

How much gear oil should be added to an 800W electric tricycle?

An 800W electric tricycle requires 250 milliliters of gear oil. Introduction to Gear Oil: Add 250 milliliters of gear oil. Gear oil primarily refers to the lubricating oil used in transmissions and rear axles. It differs from engine oil in terms of usage conditions, composition, and performance characteristics. Gear oil mainly serves to lubricate gears and bearings, prevent wear and rust, and assist in heat dissipation for gears. Automotive gear oil is used in gear transmission mechanisms such as steering systems, transmissions, and drive axles. Due to the high surface pressure during gear transmission, gear oil plays a crucial role in lubrication, anti-wear, cooling, heat dissipation, anti-corrosion, rust prevention, cleaning, and reducing gear surface impact and noise. Gear Oil Specifications: GL-1 is designated for automotive spiral bevel gears and worm-type drive axles under low tooth surface pressure and low sliding speed, as well as various manual transmissions. GL-2 is for automotive worm-type drive axles where GL-1 gear oil cannot meet the requirements due to load, temperature, and sliding speed conditions, and thus GL-2 grade gear oil is specified. GL-3 is for automotive manual transmissions and spiral bevel gear drive axles under relatively harsh sliding speed and load conditions, requiring GL-3 grade oil. GL-4 is specified for various gears operating under low-speed high-torque and high-speed low-torque conditions, especially hypoid gears in buses and other vehicles. GL-5 is designated for various gears operating under high-speed shock loads, high-speed low-torque, and low-speed conditions, particularly hypoid gears in buses and other vehicles. GL-6 is for gears in passenger cars and other vehicles operating under high-speed shock conditions, especially hypoid gears with large offsets exceeding 50nm or close to 25% of the large gear diameter, requiring GL-6 grade gear oil.

19

3

Share

What is the reason for the one-touch window lift malfunction after replacing the battery?

The reason for the one-touch window lift malfunction after replacing the battery may be due to the driver-side window control lock being engaged or wiring issues. Solutions for the one-touch window lift malfunction: If the driver-side window control lock is engaged, press and hold the button to lower the window completely, hold for a few seconds, then raise the window to the top and hold for a few seconds. If it's a wiring issue, it's necessary to visit a 4S shop or a professional electrical repair shop for maintenance. After repeatedly raising and lowering the window several times, to prevent overheating and damage to the window lift motor, the window lift function may temporarily shut down for a few seconds. Other possible causes include an abnormal door control module, malfunctioning window lift control buttons, insufficient battery power, etc. After disconnecting and reconnecting the car battery, the automatic lift function of the power window may temporarily fail. How the window works: The working principle of the power window is shown in Figure 4. The front doors have a one-touch lift with anti-pinch function, so the BCM directly controls the front door switches and front door motors to achieve one-touch lift and anti-pinch control. The rear door motors do not have the one-touch lift with anti-pinch function, so they are not connected to the BCM. The driver-side switch on the left can not only control its own window lift but also the other three windows, and can lock the power window lifts, which is designed to facilitate the driver's overall control of the vehicle. The switches on the other three doors only have the function of controlling the window lift.

4

1

Share

Can you make a U-turn when the left turn signal is on?

You can make a U-turn when the left turn signal is on. Vehicles are allowed to make a U-turn at intersections where left turns are permitted and there are no signs or markings prohibiting U-turns. Precautions for making a U-turn during a left turn are as follows: Vehicles should proceed according to the left turn lane signal without affecting the normal movement of other vehicles. If making a U-turn at an intersection with a left turn waiting area, you can first enter the left turn waiting area when the straight signal is green and wait until the left turn signal turns green to make the U-turn. Other situations where U-turns are allowed are as follows: Presence of a U-turn signal or sign: When there is a U-turn signal at an intersection, you can make a U-turn when the U-turn signal is green. If there is a U-turn sign or marking on the lane, you can make a U-turn as long as it is safe for yourself and others. U-turns are allowed at dashed lines: Whether it is a white or yellow dashed line, U-turns are permitted. For double yellow lines with one solid and one dashed, check if your side is the dashed line. If it is, you can make a U-turn safely; if it is a solid line, U-turns are not allowed. If you encounter double yellow lines at an intersection, you can make a U-turn on the dashed line side but must not cross the stop line ahead. U-turns are allowed at yellow grid lines: Parking is prohibited in yellow grid areas, but as long as there is no central barrier, you can make a U-turn here after yielding to normally moving vehicles. U-turns are allowed on the dashed side of a green belt: When the front of the green belt is a dashed line, vehicles on that side can make a U-turn from there. When the front of the green belt is a solid line, vehicles must follow the traffic signal, cross the pedestrian crossing, and then make a U-turn. It is prohibited to make a U-turn by crossing the solid line or the pedestrian crossing.

13

5

Share

What can be used to remove adhesive from a car?

Adhesive on a car can be removed using products like essential balm or alcohol. Methods to remove adhesive from a car: Wipe with a damp cloth; spray and wash with a specialized adhesive remover; clean with foam cleaner; wipe with vinegar, then scrape off after the vinegar dissolves the adhesive; apply essential balm; use alcohol; or remove with car heat insulation cleaner. Functions of car film: Blocks heat generated by infrared rays; filters ultraviolet rays to protect skin; provides safety and anti-burst features, as the base layer is polyester film with strong tear and puncture resistance; maintains privacy and security; reduces air conditioning load; and minimizes accidents caused by glare.

3

Share

How to Determine Whether Car Engine Oil Should Be Changed

The methods to determine whether car engine oil needs to be changed are as follows: 1. Prepare a blank test paper, then take out the used oil from the car engine and drop it onto the blank oil paper. 2. Observe the changes of the oil on the test paper. If the oil shows stratification, divided into three layers in total: the outermost layer is the diffusion layer, the middle layer is the oil ring, and the innermost black substance is the oil deposit, then the car's oil needs to be changed. 3. If the oil dropped on the test paper shows unclear stratification, with only two layers and no obvious black deposits in the middle, then the car oil can still be used. 4. Generally, new oil will not stratify, and when dropped on the test paper, it appears very clear and bright, proving that the purchased oil is brand new and unused.

1

2

Share

Where is the Hanteng X7 air conditioning filter located?

Hanteng X7 air conditioning filter is located inside the glove compartment in front of the front passenger seat, which can be seen upon opening. The replacement cycle for the air conditioning filter is every 10,000 kilometers. If the airflow from the air conditioner significantly decreases, the air conditioning filter may be clogged. First, clean the filter, and replace it if necessary. The steps for replacing and cleaning the Hanteng X7 air filter are as follows: 1. Open the glove compartment and pull down the small hook on the right side. 2. Pinch both sides of the glove compartment and squeeze inward to remove it. 3. This is the air conditioning filter slot. Release the clips on both sides to pull it out. 4. Pull out the filter slot, install the new filter, and reinstall the glove compartment.

5

1

Share

What does 'Transmission temperature high, please park safely' mean?

How much gear oil should be added to an 800W electric tricycle?

What is the reason for the one-touch window lift malfunction after replacing the battery?

Can you make a U-turn when the left turn signal is on?

What can be used to remove adhesive from a car?

How to Determine Whether Car Engine Oil Should Be Changed

Where is the Hanteng X7 air conditioning filter located?

How many bottles of fuel additive should be added each time?

Does Only Capturing the Front Count as Driving Against Traffic?

What Causes a Dash Cam to Suddenly Display Color Stripes?

What Are the Causes of Electric Vehicle Battery Degradation?