What does Toyota's Check VSC mean?

1 Answers
StJulianna
07/29/25 6:26pm
Toyota's Check VSC indicates a malfunction in the electronic vehicle stability control system that requires inspection. Here are the relevant details: 1. Definition of VSC: Vehicle Stability Control (VSC), with the full English name Vehicle-Stability-Control, is an active safety system developed by Toyota Motor Corporation. Similar systems include BMW's DSC Dynamic Stability Control and Volkswagen's ESP Electronic Stability Program. 2. Function of VSC: The VSC system prevents oversteer or understeer during cornering, enabling the vehicle to quickly correct its trajectory back to the intended path. 3. VSC operation: While driving, the VSC system continuously monitors the driver's steering input, vehicle speed, throttle position, braking force, as well as body tilt and roll rate through various sensors. This allows the system to detect discrepancies between safe vehicle operation and the driver's intentions. It then adjusts engine speed and distributes braking force to individual wheels to correct oversteer or understeer situations.
Was this review help?
3
1
Share
More Forum Discussions

Will a Car Get Damaged If Left in the Sun?

Leaving a car in the sun won't cause immediate damage, but it can have certain effects. Here are some specific methods for protecting your car from the sun: 1. Choose the Right Parking Spot: The simplest and most direct way to protect your car from the sun is to park it in a shaded area or an indoor garage. This prevents prolonged exposure to strong sunlight. If indoor or underground parking isn't available, try parking under a building's shade or a tree to minimize direct sunlight. However, while protecting your car from the sun, also ensure the body is safeguarded. Additionally, summer is a high-risk season for tire blowouts, so tire protection is crucial. Prolonged exposure to UV rays can cause the rubber to age, increasing the risk of blowouts. If tire temperature or pressure is too high in summer, avoid deflating or splashing cold water—instead, park in a shaded area to let the temperature and pressure normalize naturally. If tire pressure is abnormal, adjust it promptly. The LG500 car air compressor from Fengjinba features a blue-backlit pressure gauge, an anodized aluminum cylinder, and fast inflation. Its built-in pressure gauge not only checks tire pressure but also allows for quick inflation when pressure is low or if there's a leak. It can also release excess pressure, ensuring optimal tire pressure anytime, anywhere. 2. Use Sunshades or Window Films: If shaded parking isn't an option, consider using sunshades or applying heat-resistant films to your car. These films can block heat, prevent explosions, and filter UV rays, reflecting some heat away from the car. Under intense sunlight, the cabin accumulates heat rapidly, raising the interior temperature. Heat-resistant films help block this heat, improving fuel efficiency. High-quality films can block 90%~100% of UV rays and 30%~95% of infrared rays while maintaining clear visibility at night and in rainy conditions, enhancing driving safety. 3. Waxing: Prolonged exposure to UV rays can alter the paint's molecular structure, leading to fading or fine cracks, especially in summer. To protect your car's paint, regular waxing is an effective method. Waxing not only enhances shine but also provides short-term protection against oxidation, UV rays, fading, acid rain, and static electricity.
19
0
Share

Is the sequence number for the Subject 1 test based on the appointment number?

Subject 1 test sequence numbers are arranged according to the appointment number. Below are specific details about the Subject 1 test: 1. Question bank: Since July 2015, the Ministry of Public Security updated the Subject 1 question bank to 1,229 questions, and the Subject 1 test question bank is a unified national version. 2. Time: The total duration for the Subject 1 test is 45 minutes, with the test paper consisting of 100 questions, including true/false and multiple-choice questions. The test papers are randomly selected and combined by the computer driver examination system according to the proportion specified in the "Motor Vehicle Driver's License Work Regulations." 3. Content: According to the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses," the Subject 1 test content includes driving theory basics, road safety laws and regulations, local regulations, and other related knowledge.
18
4
Share

Reasons for Vehicle Body Crossing the Line in Parallel Parking?

The main reason for the vehicle body crossing the line in parallel parking during Subject 2 of the driving test may be turning the steering wheel too late. Below is a brief introduction to Subject 2: 1. Basic Information: Subject 2, also known as the small road test, is part of the motor vehicle driver's license assessment and refers to the field driving skills test. The test items for small cars C1 and C2 include five mandatory components: reversing into a parking space, parallel parking, stopping and starting on a slope, turning at a right angle, and driving on a curved path. 2. Test Content: The test items for large vehicles A1, A2, A3, B1, and B2 include stake test, stopping and starting on a slope, parallel parking, crossing a single-plank bridge, driving on a curved path, turning at a right angle, passing through a width-restricted gate, navigating continuous obstacles, driving on undulating roads, making a U-turn on a narrow road, as well as simulated scenarios such as highways, continuous sharp turns on mountain roads, tunnels, rainy and foggy weather, slippery roads, and emergency handling.
6
0
Share

What does 30cm refer to the distance from the corner of the garage?

30cm refers to the distance from the corner of the garage to the body of the car. Here are the specific techniques for finding the 30cm distance: 1. Observe the position of the engine hood: After hearing the voice prompt, you need to drive forward and to the right. When you see the right front corner of the engine hood at the 1/3 position align with the roadside line, the distance between the car body and the roadside line is exactly 30cm. 2. Look at the raised part of the wiper: From the driver's seat, when the raised part of the wiper aligns with the right side line, the distance is approximately 30cm. 3. Look at the right front door handle: Observe the right front door handle in the right rearview mirror. If the right front door handle is tangent to the right side line, the distance is 30cm; if it is too far, you need to make slight adjustments to the direction; if it is too close, there is a risk of pressing the line.
2
0
Share

Why is Subject 3 Divided into Two Tests?

Subject 3 consists of a road test and a written test on safety knowledge, hence requiring two separate examinations. Below are the specific details about Subject 3: 1. Introduction: Subject 3 is part of the motor vehicle driver's license assessment, officially known as the Road Driving Skills and Safety & Civilized Driving Knowledge Test. 2. Content: The road driving skills test typically includes: vehicle preparation, light simulation test, starting, straight-line driving, gear shifting operations, lane changing, pulling over, proceeding straight through intersections, turning at intersections, meeting vehicles, overtaking, making U-turns, night driving, etc. The test content varies depending on the type of vehicle license. 3. Test Content: The safety and civilized driving operation requirements, safe driving knowledge under adverse weather and complex road conditions, as well as post-accident handling knowledge, etc.
14
4
Share

Can You Cross the Dotted Line When Parallel Parking?

When performing parallel parking, the vehicle must not cross the dotted line outside the parking space. Here is some relevant information: 1. Previous parallel parking method: Four poles were placed on the ground to symbolize the four corners of the parking space. One of the criteria for successful parking was whether the vehicle touched these four poles. After the implementation of the new traffic regulations, parallel parking no longer uses poles; instead, ground markings are used to define the parking space boundaries. 2. For learners obtaining a C1 driver's license: The length of the parallel parking space is equal to the length of the vehicle. The vehicle must be driven to a position parallel to the parking space, then reversed into the space without any pauses. As long as the vehicle is parked within this range without crossing the boundary lines, it is considered a pass.
5
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.