What does 'title' mean on a car?

How far can a car key unlock the car?

Car keys can receive the unlock signal at a distance of approximately 50 meters. Car remote keys use radio frequency technology. For new cars, the doors can generally be unlocked at a distance of 30-50 meters from the vehicle. The maximum range for remote unlocking is a straight-line distance of 50 meters around the vehicle without any obstacles, allowing the doors to be locked or unlocked by pressing the remote. When a new car leaves the factory, it usually comes with 2 to 3 keys. Additionally, each new car has an anti-theft key code configured with the vehicle. If only one key is provided, the 4S store can query the anti-theft key code from the database based on the vehicle registration certificate and the owner's ID provided by the owner. After obtaining this code, the 4S store requires the owner to provide the key tooth shape number to configure a new metal key. If a car key is lost, the owner can also call 110 or 114 for assistance. If help is requested from 110 or 114, the call will be transferred to the corresponding coordination center, which will notify a nearby or on-duty lock and key service company. A professional will then promptly contact the owner to help resolve the issue.

15

0

Share

How to Convert AC to DC Wiring on a Motorcycle?

Replace the original rectifier with a DC rectifier (four-wire or five-wire). Disconnect the center tap of the original generator coil, which is the white (or yellow) wire (be careful not to break the enameled wire), and insulate it properly for disuse. Disconnect the grounded end of the original generator coil and connect it to the previously disconnected white (or yellow) wire, then insulate it properly. If the rectifier is four-wire, connect as follows: the green wire to ground, the red wire to the battery fuse, and the other two wires to the two output wires of the generator coil respectively. If the rectifier is five-wire, refer to the fourth step above and connect the black wire to the red wire or the black wire on the motorcycle.

6

1

Share

What are the main components of gear oil?

Gear oil mainly consists of: 1. Gear oil is primarily composed of petroleum lubricating base oil or synthetic lubricating oil, blended with extreme pressure anti-wear agents and oiliness agents to form an important type of lubricating oil. 2. It is used in various gear transmission devices to prevent tooth surface wear, scuffing, sintering, etc., thereby extending their service life and improving power transmission efficiency. 3. Automotive gear oil is used in gear transmission mechanisms such as vehicle steering gears, transmissions, and drive axles. Due to the high surface pressure during gear operation, gear oil plays a crucial role in lubrication, anti-wear, cooling, heat dissipation, anti-corrosion and rust prevention, cleaning, and reducing tooth surface impact and noise.

5

Share

How to Deal with a Motorcycle That Won't Start Due to Water in the Fuel Tank?

Remove the high-voltage cap, dry it with tissue paper, take out the spark plug, and insert it into the high-voltage cap. Then, use the electric starter or kick starter. Check the electrical circuits, expose the motorcycle to direct sunlight, and use high-pressure air to dry all the connectors in the wiring. Remove the exhaust pipe to drain the water, take off the air filter, and if the filter element is wet, replace it with a new one directly. Drain the fuel from the carburetor, remove the screws on the carburetor, wait for 3 seconds before closing the switch to ensure all the oil is drained, then reinstall the screws and drain the water.

14

5

Share

Is the Theory Test of Subject 3 the Same as Subject 4?

Subject 3's theory test can refer to Subject 4. Subject 4, also known as the Subject 4 theory test or driver theory test, is part of the motor vehicle driver's license assessment. After the implementation of the Ministry of Public Security's Order No. 123, Subject 3 was divided into two parts: besides the road test, a safe and civilized driving test was added, commonly known as Subject 4. Therefore, it can be said that the theory test of Subject 3 is Subject 4. Currently, there are a total of 4 examination subjects for obtaining a driver's license: Subject 1 - Road traffic safety laws, regulations, and related knowledge test; Subject 2 - Field driving skills test; Subject 3 - Road driving skills test; and Subject 4 - Safe and civilized driving knowledge. The content and passing standards of these subjects are uniformly set nationwide. The examination sequence follows the order of Subject 1, 2, 3, and 4, and candidates can only proceed to the next subject after passing the current one. Among these, Subject 1 and Subject 4 assess theoretical knowledge through computer-based tests, while Subject 2 and Subject 3 evaluate practical driving skills through field and road driving tests. Subject 4 extracts knowledge related to safe and civilized driving requirements from the original Subject 1, including safe driving skills under complex conditions and emergency handling, and is conducted after the actual road driving test of Subject 3 to further assess the candidate's traffic awareness and quality.

11

3

Share

What is the material of spark plugs?

Spark plug materials include nickel alloy, platinum, and iridium. Spark plugs are a crucial component of the ignition system in gasoline engines. They introduce high voltage into the combustion chamber and generate sparks by jumping across the electrode gap, thereby igniting the combustible air-fuel mixture in the cylinder. The main types of spark plugs are: Standard spark plugs, projected insulator spark plugs, electrode spark plugs, seat-type spark plugs, surface gap spark plugs, and surface discharge spark plugs. Working principle of spark plugs: The ground electrode of a spark plug is connected to the metal shell, which is threaded into the engine block via the cylinder head. The insulator primarily serves to isolate the metal shell from the central electrode. The terminal nut is the part of the spark plug that contacts the high-voltage coil. Current passes through the terminal nut and the central electrode, then ionizes the medium between the central electrode and the ground electrode to produce a spark, thereby igniting the air-fuel mixture in the cylinder.

6

0

Share

What does 'title' mean on a car?

How far can a car key unlock the car?

How to Convert AC to DC Wiring on a Motorcycle?

What are the main components of gear oil?

How to Deal with a Motorcycle That Won't Start Due to Water in the Fuel Tank?

Is the Theory Test of Subject 3 the Same as Subject 4?

What is the material of spark plugs?

How to Replace the Air Filter in an Atenza

What is the sequence for checking the vehicle condition in Subject Three?

How to Use the Foot Brake?

Where is the cabin air filter installed in the Lifan 320?