What does Tire Anomaly 1.9 Mean?

2 Answers
ElenaMarie
07/29/25 5:00am
Tire anomaly 1.9 indicates low tire pressure. It means the tire pressure monitoring system has detected low pressure in one or more tires. In this situation, you should slow down and brake gently to stop safely, avoid sharp turns, and correct the tire pressure when the tires are cold. Below are the hazards of both overinflated and underinflated tires: Hazards of overinflated tires: Reduced tire friction and adhesion, affecting braking performance; Causes steering wheel vibration and deviation, reducing driving comfort; Accelerates wear on the central tread pattern, shortening tire lifespan; Increases vehicle vibration, indirectly affecting the lifespan of other components; Hazards of underinflated tires: Increased friction with the road surface, leading to higher fuel consumption; Creates steering difficulties and deviation, compromising driving safety; Increases movement in various tire parts, causing abnormal heat due to excessive rolling; Weakens cord and rubber functions, leading to delamination or cord breakage, and causes excessive friction with the rim resulting in bead damage and abnormal wear.
Was this review help?
19
3
Share
DiLogan
08/12/25 8:39am
I've been driving for over a decade and occasionally encounter the 'Tire Abnormal 1.9' warning, which honestly gets quite annoying. The 1.9 refers to the tire pressure value in bar, and such a low number indicates insufficient pressure—probably around 1.9 bar. Normal tire pressure typically ranges between 2.0 and 2.5 bar, depending on the vehicle model. Low pressure leads to faster tire wear, increased fuel consumption, heavier steering, and unstable handling during turns. Once, during a long trip, I had a flat tire midway because of this issue and had to switch to the spare. I recommend always carrying a portable pressure gauge and checking the tires when refueling. If the warning light stays on constantly, it might mean a nail puncture or a leaking valve core—don’t ignore it and get it fixed promptly. Safe driving starts with attention to detail. Regular checks can save a lot of hassle.
Was this review help?
5
1
Share
Expand All
More Forum Discussions

Does the Toyota LC76 have an automatic transmission?

Toyota LC76 does have an automatic transmission, which is paired with a manual-automatic transmission. Below is some information about the Toyota LC76: Toyota LC76 specifications: The Toyota LC76 has a body length, width, and height of 4080 mm, 1770 mm, and 1935 mm respectively, with a wheelbase of 2310 mm. It is equipped with a 4.5-liter V8 naturally aspirated diesel engine, delivering a maximum power of 195 kW. This vehicle comes with an automatic transmission, paired with a manual-automatic transmission. Exterior and interior design: The LC76 is a Toyota Land Cruiser off-road vehicle, renowned for its outstanding off-road performance and hailed as the true vehicle for off-road enthusiasts, active worldwide. In terms of exterior design, the LC76 features a very rugged standard configuration, with all lines straight and angular, which gives it higher reliability and strong adaptability to complex road conditions. For the interior, the LC76 adopts an ergonomic design philosophy, offering very spacious space with a relatively simple design. The flat and solid chassis ensures excellent off-road capability.
11
3
Share

What is the explanation of tire specifications and models?

Tire specifications and models are explained as [tire width in mm]/[percentage of tire thickness to width]. The following is a detailed explanation about tires: 1. Meaning: Tires are circular elastic rubber products mounted on various vehicles or machinery to roll on the ground. They are usually installed on metal rims to support the vehicle body, cushion external impacts, achieve contact with the road surface, and ensure the vehicle's driving performance. Tires are often used under complex and harsh conditions, enduring various deformations, loads, forces, and high-low temperature effects during operation. Therefore, they must possess high load-bearing capacity, traction performance, and cushioning performance. At the same time, they are required to have high wear resistance and flex resistance, as well as low rolling resistance and heat generation. Half of the world's rubber consumption is used for tire production, highlighting the significant role of tires in rubber usage. 2. Basic functions: Tires are one of the most important components of a vehicle. Their main functions include supporting the entire weight of the vehicle and bearing the vehicle's load; transmitting traction and braking torque to ensure the adhesion between the wheels and the road surface; mitigating and absorbing vibrations and impacts during driving to prevent severe vibrations and early damage to vehicle components; adapting to the vehicle's high-speed performance and reducing driving noise; ensuring driving safety, handling stability, comfort, and energy efficiency.
15
2
Share

What documents are required for car scrapping?

Documents required for car scrapping include: vehicle license, registration certificate, vehicle documents, the owner's ID card, and accident vehicle certification materials. According to the 2000 car scrapping standards, although private cars still have age restrictions, the standard can be extended to 15 years through annual inspections. The process for car scrapping: 1. The vehicle owner submits certification materials to the vehicle dismantling plant's business department to fill out the Application Form for Vehicle Suspension, Resumption, or Cancellation of Registration; 2. Wait for notification at the license plate management counter for fees and surrender of license plates; 3. Apply at the registration acceptance counter, where a car scrapping notice will be issued for vehicles that have reached the scrapping age; 4. The vehicle owner chooses a qualified recycling company to dismantle the vehicle according to the notice; 5. The recycling company checks the notice, dismantles the vehicle, and takes photos; 6. The owner submits the change form, XX Province Updated Vehicle Technical Appraisal Form, scrapped vehicle recycling certificate, and vehicle dismantling photos to the vehicle inspection counter for verification and signature. The recycling company then submits the license plates for approval according to regulations and completes the scrapping registration.
13
5
Share

How many kilometers can car brake pads generally last under normal conditions?

Analyzing under normal driving conditions, the service life of front brake pads is approximately 30,000 to 50,000 kilometers, while rear brake pads can last about 60,000 to 100,000 kilometers. Once severe wear is detected, immediate replacement is necessary. To assess brake pad quality, first examine the friction coefficient, which determines the fundamental braking torque. Too high a coefficient may cause wheel lock-up and loss of directional control during braking, whereas too low results in excessively long braking distances. Secondly, consider safety factors - brake pads generate instantaneous high temperatures during braking, especially during high-speed driving or emergency stops. Under high temperatures, the friction coefficient of the lining decreases. An effective braking system must provide stable, controllable braking force with excellent hydraulic transmission and heat dissipation capabilities. This ensures the force applied by the driver through the brake pedal is fully transmitted to the master cylinder and individual wheel cylinders, preventing hydraulic failure and brake fade caused by excessive heat. Under normal driving conditions, brake pads should be inspected every 5,000 kilometers. The inspection should include not only remaining thickness but also wear patterns, checking for even wear on both sides and proper return functionality.
2
0
Share

What color of antifreeze should be added to the Leopaard CS10?

The Leopaard CS10 requires green antifreeze. Method for replacing antifreeze: Before completely replacing the antifreeze, conduct a thorough inspection to check for any signs of leakage or cracks in the pipelines, with a particular focus on the five-way water pipe. The five-way pipe is named for its five connections to various parts, and the antifreeze flows through this pipe to be distributed to different sections of the car to function. If there is any leakage of antifreeze in this area, replace the water pipe or resecure the connections as needed. Drain the old antifreeze, then flush the liquid channels with clean water. Add clean water to the antifreeze reservoir and continue to fill it until water flows continuously through the engine cooling system. Start the engine and let it idle for 3 to 5 minutes to circulate the water. Initially, the water flowing out of the reservoir may appear slightly pinkish. Continue adding clean water until the outflow is clear. Remember to remove the heater hose and drain the water from the heater core. About an hour after draining, add the new antifreeze through the radiator hose, which allows the antifreeze to flow quickly into the radiator. Then, add another container of antifreeze to the antifreeze reservoir until it is nearly full. Start the engine and let it run for about 10 minutes. During this time, the coolant level will drop slightly as air is expelled from the system. Top up the antifreeze to the "MAXT" mark on the reservoir.
12
3
Share

What is the Ideal RPM for Starting a Car?

There is no fixed RPM value for starting a car, as it largely depends on road conditions and terrain. On flat roads, around 1000 RPM is sufficient, while steep slopes may require over 1500 RPM. However, it's crucial not to exceed 2000 RPM. Below are some key considerations when starting a car: 1. Before getting into the car, always check the surroundings to ensure there are no obstacles that could compromise driving safety. 2. If you feel the engine lacks power or is about to stall during startup, immediately press the clutch pedal and restart the process. 3. Operate the clutch pedal according to proper techniques. Releasing it too slowly can accelerate wear on the clutch friction disc, pressure plate, and flywheel contact surfaces, leading to clutch component damage. Conversely, releasing the clutch too quickly or applying insufficient throttle can cause the engine to stall. 4. Apply the throttle gradually and smoothly. Sudden, aggressive acceleration can cause the car to jerk forward violently, which not only affects safety but may also damage the vehicle's transmission components. If you can't engage the gear on the first attempt when starting, you can release and press the clutch pedal again, or try shifting to another gear before attempting the starting gear again.
14
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.