···
Log in / Register

What does the yellow RVM light on the Chery Ant mean?

2 Answers
VanGiselle
09/03/25 3:06am
RVM stands for Rear Vehicle Monitoring system, which alerts the driver when there is a vehicle in the blind spot during lane changes. A yellow RVM light on the Chery Ant indicates a malfunction that requires troubleshooting and timely repair. Here is additional information: 1. How RVM works: RVM uses sub-millimeter wave radar installed on the rear bumper to detect vehicles in adjacent lanes and measure the distance to vehicles behind. When a lane change could be dangerous, it alerts the driver by flashing an indicator and sounding an alarm. 2. RVM may have limited functionality under the following conditions: poor weather (rain, snow, fog, etc.) or when near certain types of vehicles (small two-wheelers, low-profile vehicles, etc.).
Was this review help?
3
1
Share
LaEleanor
09/15/25 4:49am
The illuminated RVM yellow light on the Chery Ant indeed raises concerns, as it typically indicates a minor fault in the vehicle's system, such as power or battery issues. I encountered a similar situation when driving the Ant before—it was due to a depleted 12V auxiliary battery, preventing normal startup, with the yellow light staying lit on the dashboard. Common causes may also include charging system errors or lost sensor signals. In such cases, it's best to first try restarting the vehicle by turning the key off and then on again to see if the light remains illuminated. If it doesn’t go out, check the battery connections or visit a professional repair shop to scan for fault codes. Don’t ignore this light and continue driving, as it may lead to more severe drivetrain damage and compromise road safety. It’s advisable to develop a habit of regularly inspecting the auxiliary battery to prevent similar issues.
Was this review help?
9
5
Share
Expand All
More Forum Discussions

What is the fuel tank capacity of the 7th-generation Camry?

The fuel tank capacity of the 7th-generation Camry is 70 liters. The fuel tank consists of the following components: fuel tank cap, baffle, fuel gauge sensor, fuel inlet and return pipes, fuel filler neck, and vent. Taking the 2013 7th-generation Camry as an example, it is a mid-size sedan with the following dimensions: length 4825mm, width 1825mm, height 1480mm, wheelbase 2775mm, minimum ground clearance 159mm, and curb weight 1430kg. The 2013 7th-generation Camry is equipped with a 2.0L naturally aspirated engine, delivering a maximum horsepower of 148PS, maximum torque of 190Nm, and maximum power of 109kW.
5
3
Share

What are the effects of installing a rearview camera on a car?

Installing a rearview camera has no impact on the car, as long as the original wiring is not damaged during installation, which could affect the warranty. The car rearview camera, also known as a parking assist system, consists of a wide-angle camera, a control unit for signal transmission, an MMI display, an information display control unit, a TV tuner, and a CAN data harmonization bus. Its function is to allow the driver to see the situation behind the car on the display when reversing, ensuring safe reversing. The reasons for no signal from the car rearview camera are: 1. The data cable connected to the rearview camera is loose or poorly connected; 2. The rearview camera is damaged. The solutions for no signal from the car rearview camera are: 1. Restart the vehicle and turn off the music player; 2. Secure the data cable of the rearview camera; 3. Replace the rearview camera.
4
1
Share

Is the license plate for a China VI vehicle also China VI?

Purchasing a China VI vehicle means its license plate is also China VI. China VI refers to the national sixth-stage pollutant emission standards for motor vehicles, which strictly regulate the limits on pollutant emissions. The regulations for China VI include: under conditions excluding operational and testing influences, carbon monoxide emissions from gasoline vehicles are reduced by 50%, total hydrocarbon and non-methane hydrocarbon emission limits are lowered by 50%, and nitrogen oxide emission limits are tightened by 42%. The purpose of establishing the China VI emission standards is to prevent pollution from the exhaust of compression-ignition and gas-fueled spark-ignition engine vehicles, thereby protecting the ecological environment.
17
4
Share

How to adjust the time on the Mazda6 Ruiyi?

The method to adjust the time on the Mazda6 Ruiyi is: 1. Press SET once, then press the right arrow key to make an underline appear under the time display; 2. Hold down CLOCK until the time starts blinking, then press TRACK or SEEK - the up arrow adjusts hours while the down arrow adjusts minutes. Taking the 2015 Mazda6 Ruiyi as an example, it is a mid-size sedan with body dimensions of: length 4755mm, width 1795mm, height 1440mm, and a wheelbase of 2725mm. The 2015 Mazda6 Ruiyi is equipped with a 2.0L naturally aspirated engine producing 147PS maximum horsepower, 184Nm maximum torque, and 108kW maximum power, paired with a 5-speed automatic transmission.
11
1
Share

What is the reason for the yellow exclamation mark on the Tiguan dashboard?

The reasons for the yellow exclamation mark on the Tiguan dashboard are: 1. Reminding the owner to turn off the traction control system; 2. Insufficient tire pressure; 3. Transmission malfunction, transmission lubricant below the normal range, or the lubricant needs to be replaced. Taking the 2017 Tiguan as an example, it is a compact SUV with body dimensions of: length 4506mm, width 1809mm, height 1685mm, and a wheelbase of 2684mm. The 2017 Tiguan is equipped with a 1.8T turbocharged engine, with a maximum horsepower of 160PS, a maximum torque of 250Nm, a maximum power of 118kW, and is paired with a 6-speed automatic manual transmission.
11
2
Share

Where is the rear camera installed for a dash cam?

The rear camera of a dash cam is typically installed at the upper left or upper right corner of the license plate. The purposes of a dash cam are: 1. To preserve crucial video evidence when accident scenes lack clear traces or are damaged, assisting traffic police in handling incidents; 2. When connected to a direct power supply, it can function as a parking surveillance system; 3. To deter drivers from reckless driving and reduce accident rates; 4. To safeguard drivers' legal rights by providing valid evidence. A dash cam consists of: 1. The main unit, including a microprocessor, data storage, real-time clock, display, lens module, control buttons, printer data, and data communication interface; 2. A vehicle speed sensor; 3. Data analysis software.
3
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.