What does the yellow exclamation mark on Toyota Izoa mean?

1 Answers
VonKaylee
07/29/25 7:18pm
The yellow exclamation mark on the dashboard is the tire pressure warning light, indicating an abnormal tire pressure condition in the vehicle. It is crucial to promptly identify which specific wheel is experiencing the issue. Abnormal tire pressure can cause uneven height among the four tires, leading to abnormal wear on the affected tire and making it difficult to control the vehicle's direction while driving. Abnormal tire wear: When the tire pressure warning light is on, wait until the vehicle stabilizes and observe which specific wheel has abnormal tire pressure. Uneven tire pressure can result in the four tires being at different heights, causing abnormal wear on the problematic tire and making it challenging to steer the vehicle. Repair at an auto service shop: When the tire pressure warning light comes on, you can use an air pump at a general auto repair shop to inflate the tires while monitoring the tire pressure condition. When the warning light turns off, it indicates that inflation can be stopped. Regularly checking the tire pressure can help detect leaks or punctures in the tires; otherwise, prolonged tire issues may lead to a vehicle breakdown.
Was this review help?
14
3
Share
More Forum Discussions

What Theoretical Knowledge is Required for Learning to Drive?

Learning the theoretical knowledge for driving mainly includes the content from Subject 1 and Subject 4. Subject 1: Main contents include: Road traffic safety laws, regulations, and rules; Local regulations; Traffic signals; Basic knowledge of safe driving and civilized driving; Basic knowledge related to vehicle operation. Subject 4: Main contents include: Requirements for safe and civilized driving operations; Safe driving knowledge under adverse weather and complex road conditions; Emergency handling methods for situations like tire blowouts; and knowledge on handling traffic accidents. Examination Subjects: The content and passing standards for the examination subjects are uniformly set nationwide. The examination sequence follows Subject 1, Subject 2, Subject 3, and Subject 4 in order. Only after passing the previous subject can one proceed to the next subject's examination.
2
3
Share

Why can't there be 8 wedding cars?

The reason why there can't be 8 wedding cars is that the number 8 is considered unlucky. Here are the specific explanations: Seven Up, Eight Down: There is a saying "Seven up, eight down." Seven represents going up, which is good, while eight represents going down, implying that the couple's relationship will deteriorate over time. Common number of wedding cars: Six cars: Signifies smooth sailing in all aspects, with the couple and family enjoying smooth and harmonious lives. Ten cars: Represents perfection, symbolizing flawless love between the couple without any cracks. Twelve cars: Implies "true love," representing genuine and pure love. Seven cars: Symbolizes the couple being "united" in heart and sharing mutual respect. Nine cars: Represents long-lasting love between the couple, growing old together. Eleven cars: Symbolizes undivided attention and devotion in love.
13
5
Share

What Nozzle Size is Needed for a Fine Spray with a Paint Gun?

For a fine spray with a paint gun, a nozzle size of 0.3 to 0.8mm is required. Automotive paint spraying methods: Base Coat: Pearl silver base coat is applied in three layers. The first layer is a mist spray, with a faster gun movement speed, creating a thin, fog-like application over the repair area or the entire vehicle to ensure the paint adheres to the primer. The second layer is applied to cover the primer or filler, revealing the color. Care should be taken to avoid silver base coat spotting or unevenness, and the gun movement speed can be slightly faster. The third layer corrects any spotting or unevenness from the second layer. Overall, the goal is to achieve uniform color coverage over the repair area or the entire vehicle. Clear Coat: After applying the base coat, allow a flash-off time of 5~15 minutes for some solvents to evaporate and the film to dry before applying the clear coat. The clear coat can be applied when the base coat is dry enough to touch lightly without transferring color. If the base coat surface is rough or to prevent dust, use a tack cloth and compressed air to blow and wipe simultaneously, followed by degreasing with a degreaser.
19
1
Share

Should I go to a 4S shop or a repair shop for damage assessment?

You can go to either a 4S shop or a repair shop for damage assessment, but it is better to go to a 4S shop. Damage assessment at a 4S shop: Generally, after the damage assessment at a 4S shop, the vehicle will be repaired directly at the 4S shop. On one hand, 4S shops are more reliable. On the other hand, the parts used or replaced at a 4S shop are also guaranteed. Moreover, in auto insurance claims, disputes over damage assessment should be avoided as much as possible. Damage assessment at a repair shop: Repair shops offer lower prices for car repairs, and there are some differences in the damage assessment process between repair shops and 4S shops. The damage assessment at 4S shops is more standardized and strict, with relatively standardized use of various parts and procedures, while the damage assessment at repair shops is generally less rigorous.
20
1
Share

What procedures are required for a car to undergo inspection?

To have a car inspected, you need to prepare the compulsory traffic insurance policy, driver's license, motor vehicle inspection application form, motor vehicle safety inspection certificate, motor vehicle registration certificate, etc. Car annual inspection period: For non-commercial small cars, new cars are exempt from inspection for the first six years. After six years, they need to be inspected annually. If a family car is over 15 years old, it must undergo inspection every six months. For commercial vehicles, annual inspection is required every year. If they exceed 15 years, large commercial vehicles or cargo vehicles must be inspected annually. Annual inspection items: The inspection includes checking whether the vehicle's engine, chassis, body, and accessories are clean and complete, as well as verifying if the vehicle's paint is uniform. Additionally, the inspection covers the vehicle's braking performance, steering control, lights, exhaust, and other safety-related aspects to ensure the vehicle complies with the technical conditions for safe operation.
12
0
Share

What causes steering wheel vibration when driving at 120 km/h?

Steering wheel vibration when driving at 120 km/h can be caused by the following reasons: Reaction force between tires and road surface: The vibration is caused by the reaction force generated when tires contact the road surface. Since cars rely on four wheels to contact the ground, and the road surface is never perfectly flat. On the same road surface, a car driving at low speed has smaller contact area with the road compared to high-speed driving, resulting in less force feedback to the steering wheel. When driving at high speed, the tire's contact area with the road increases, leading to greater force feedback, creating a noticeable contrast with low-speed driving. Vehicle-related issues: All four wheels should be perpendicular to the ground. If there is inward or outward tilt, foreign objects on the tire surface, loss of wheel balance weights, deformed wheel hubs, excessive steering linkage clearance, insufficient tire pressure, or any other vehicle-related issues, the car will vibrate when driven.
6
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.