What does the yellow exclamation mark on the Wuling dashboard indicate?

2 Answers
AustinRose
07/24/25 2:01am
When a yellow exclamation mark appears on the car dashboard, there are four possible scenarios: general faults, automatic transmission faults, abnormal tire pressure, and lighting faults. Below is a detailed analysis of these four situations: General Faults: A triangle with an exclamation mark inside indicates that the car's general performance or components and functions have malfunctioned. Common issues include parking sensor failure, fuel cutoff system intervention or malfunction, external light failure, or engine oil pressure sensor failure. It is recommended to visit a 4S shop for inspection to identify the source of the fault. Automatic Transmission Fault: A yellow gear with an exclamation mark inside is the automatic transmission fault warning light, indicating a transmission malfunction or low transmission fluid level. The transmission fluid should be replaced promptly. Abnormal Tire Pressure: An exclamation mark inside a horizontal line under a bracket represents the tire pressure monitoring warning light. This light turns on when the tire pressure is too low. Check the tire pressure and restore it to the normal range. Lighting Fault: A yellow bulb with an exclamation mark is the lighting fault indicator, signaling a malfunction in one of the car lights. Solution: Visit a 4S shop for inspection as soon as possible, or perform a self-check focusing on commonly used bulbs such as turn signals, fog lights, and interior lights to identify the issue. Additionally, a red exclamation mark inside a circle with brackets indicates a warning related to the braking system, such as brake system failure or low brake fluid level. Immediate inspection of the braking system is required to avoid accidents.
Was this review help?
20
4
Share
CarsonMarie
08/10/25 9:42pm
I've been driving for many years, and it's common to see a yellow exclamation mark light on the Wuling dashboard. This usually indicates that some safety system is malfunctioning. The most common issue is low tire pressure, such as when the pressure falls below the recommended value. A flat tire can trigger this light, making the handling feel worse while driving and increasing fuel consumption. It could also be an ABS system failure, meaning the anti-lock braking system isn't working properly, which can cause skidding during sudden braking. Another possibility is low brake fluid levels, where insufficient fluid leads to inadequate hydraulic system pressure. Last time I encountered this issue, a quick check revealed a nail in the rear tire causing a slow leak—after refilling the air, everything returned to normal. I recommend developing a habit of checking tire pressure with a gauge every two weeks to maintain the standard value. If the light comes on, don’t panic—pull over safely and check the tire pressure. If everything seems fine, visit a repair shop as soon as possible to scan for fault codes. Small issues can escalate into major problems if ignored. Regular maintenance saves both hassle and money.
Was this review help?
1
4
Share
Expand All
More Forum Discussions

What does the rear button in a car mean?

Rear refers to the rear windshield defogger. Pressing it removes fog from the rear windshield. Typically, the rear defogger switch automatically turns off after about ten minutes to protect the heating filaments. If the defogging effect is unsatisfactory after activating the rear defogger, it may be due to aging from prolonged use. Here is additional information: 1. Representation: The literal meaning of 'rear' is the back or rear part. In cars, the rear button appears in the air conditioning system and functions as the rear windshield defogger. However, many car models now omit the 'rear' label and simply use an icon. 2. Heating filaments: On the rear windshield of a car, you can see copper wires, which are heating filaments. Pressing the rear button activates these filaments to heat and defog the rear windshield. Usually, the rear defogger switch turns off automatically after about ten minutes to protect the heating filaments. In fact, many car models now also feature a front windshield heating system.
3
4
Share

What is the Difference Between a Streaming Media and a Dash Cam?

Streaming media and dash cams mainly differ in terms of cost and performance, size, lifespan, and installation process. Below is a detailed introduction to these four differences: Cost and Performance: The cost of a streaming media rearview mirror is higher than that of a dash cam. At the same time, streaming media supports simultaneous front and rear recording. Streaming media also requires higher processor and memory card capacity compared to dash cams. Size: Streaming media devices are larger in size, while dash cams are more compact. Streaming media may interfere with the use of the driver's sun visor. Lifespan: The lifespan of a streaming media rearview mirror is longer than that of a dash cam. This is because dash cams are usually exposed outside the vehicle and are more prone to damage. Installation Process: The installation process for a streaming media rearview mirror is more complex than that of a dash cam. Installing streaming media requires wiring.
16
4
Share

Which Areas Need Soundproofing Treatment in a Car?

Car soundproofing is most effective when applied to the engine, four doors, and chassis. However, car soundproofing must be done systematically and comprehensively; focusing on just one area cannot achieve the most effective soundproofing quality. Below is a detailed introduction to car soundproofing: Partial Soundproofing vs. Full-Car Soundproofing: Full-car soundproofing offers the best results but is the most expensive, while partial soundproofing is the most economical. Hiring a Professional Team for Car Soundproofing: DIY modifications not only consume a lot of time but also yield inferior results compared to professional teams. Noise and Soundproofing: Car noise is categorized into low, medium, and high frequencies. Not all noises can be blocked. Medium- to high-frequency noises, such as engine noise, can be soundproofed. Tire noise, especially exhaust pipe sounds, falls under medium- to low-frequency noise and is difficult to isolate.
2
3
Share

How to Charge a Plug-in Hybrid Electric Vehicle at Home?

Plug-in hybrids can be charged at home by using the included portable charging cable, plugging it into a standard 220V single-phase three-pin AC household socket. Below is an introduction to related content: 1. A plug-in hybrid is a type of new energy vehicle that falls between a pure electric vehicle and a traditional fuel-powered car. It features both a conventional car's engine, transmission, drivetrain, fuel system, and fuel tank, as well as the battery, electric motor, and control circuitry of a pure electric vehicle. 2. Characteristics of plug-in hybrid vehicles: They can be externally charged. Even when the battery is depleted, the engine can drive the generator to recharge the battery. Plug-in hybrids still primarily rely on traditional fuel as their main power source, with the electric motor serving as an auxiliary power source. 3. Plug-in hybrid vehicles are categorized into: (1) Traditional internal combustion engine drive: Uses fuel consumption to obtain driving power. (2) Electric drive: Uses power from the battery to obtain driving force.
20
1
Share

What Are the Maintenance Methods for an Automotive Generator?

Daily maintenance of an automotive generator primarily involves cleaning and inspection tasks. Cleaning: The heat generated during the generator's operation is cooled by the fan behind the pulley blowing air into the casing. Removing accumulated dirt and dust from the generator's exterior helps maintain clear ventilation channels for effective heat dissipation. Checking and Adjusting Belt Tension: The alternator is driven by the engine via a belt, and the belt tension should be properly adjusted. If the belt is too loose, it may slip, leading to insufficient power generation. Conversely, if the belt is too tight, it can cause belt damage and excessive wear on the generator bearings. To check belt tension: In a static state, apply 50N of force at the midpoint of the belt. If it deflects by 10~12mm, the tension is appropriate. Inspecting Wiring: Ensure the connections between the generator and the regulator are secure and in good contact. If there is any corrosion, promptly clean it with sandpaper. Similarly, any oxidized wires should be cleaned without delay.
7
1
Share

Can China 5 Vehicles Still Be Licensed After the Implementation of China 6 Emission Standards?

When the China 6 standard is implemented in a local city, China 5 vehicles will no longer be eligible for licensing. If you wish to purchase a China 5 vehicle, verify with the local vehicle management department before making a decision. However, already licensed China 5 vehicles will not be affected in terms of operation. Below is more information about China 6: 1. The China 6 standard was implemented in some major cities on July 1, 2019. After implementation, only vehicles meeting the China 6 emission standard can be licensed. All vehicles sold and registered must comply with the China 6 emission standard requirements. Vehicles below this standard will be prohibited from sale, registration, and transfer. China 4 and China 5 emission vehicles can only be scrapped or relocated to regions where the China 6 standard has not yet been implemented. 2. The China 6 emission standard is implemented in two phases: China 6A and China 6B. China 6A: Starting from July 1, 2020, all vehicles sold and registered must comply with the China 6A standard. China 6B: Starting from July 1, 2023, all vehicles sold and registered must comply with the China 6B standard.
15
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.