What does the yellow exclamation mark on the Honda Vezel P mean?

2 Answers
OJayla
07/24/25 5:01am
An exclamation mark on the car dashboard indicates an abnormality or malfunction in the corresponding system. Many indicator lights on the car dashboard feature an exclamation mark, such as the tire pressure indicator, lighting fault indicator, steering system fault indicator, brake system fault light, transmission fault indicator, and wiper fault indicator. Below is a detailed explanation of the exclamation mark warning lights: General Fault: A triangle with an exclamation mark inside indicates a general performance or component malfunction in the vehicle. Possible causes include parking sensor failure, fuel cutoff system intervention or malfunction, external light failure, or engine oil pressure sensor failure. It is necessary to visit a 4S shop for inspection to identify the source of the fault. Automatic Transmission Fault: A yellow gear with an exclamation mark inside is the automatic transmission fault warning light, indicating a transmission malfunction or transmission lubricant level below the normal range. The transmission fluid should be replaced promptly. Brake System Fault: A circle with parentheses and an exclamation mark in the middle represents a brake system warning, typically indicating a brake system malfunction or low brake fluid level. Immediate inspection of the brake system is required to avoid accidents. Tire Pressure Anomaly: A horizontal line with parentheses and an exclamation mark below represents the tire pressure monitoring warning light, which illuminates when the tire pressure is too low. Check the tire pressure and restore it to the normal range. Lighting Fault: A yellow bulb with an exclamation mark is the lighting fault indicator, signaling a malfunction in one of the vehicle's lights. Solution: Visit a 4S shop for inspection as soon as possible, or conduct a self-check focusing on commonly used bulbs such as turn signals, fog lights, and interior lights to identify the issue. In addition, during daily vehicle use, the warning lights displayed on the dashboard are categorized into yellow and red, indicating different levels of severity: Yellow indicates a fault in the corresponding system that is not extremely severe. Reduce speed and proceed to a repair facility to eliminate potential safety hazards. Red indicates a very serious issue in the corresponding system. In such cases, do not continue driving. Pull over safely and seek professional assistance immediately to prevent unpredictable risks to the vehicle and personal safety. It is important to note that when the car is started, all lights will illuminate as the system performs an automatic self-check. After the check is completed, the lights should turn off. If a light does not illuminate when the ignition is turned on, remains lit, or lights up while driving, it indicates a fault in the corresponding system. In such cases, seek professional help promptly for inspection and to eliminate safety hazards.
Was this review help?
7
3
Share
DelLucy
08/11/25 12:39am
The other day when I was driving my Vezel, I also encountered this situation - that yellow warning light with an exclamation mark really gave me a scare. Actually, this warning light most commonly indicates low tire pressure. You should pull over immediately to check if any tires look noticeably flat. Last time it happened to me, there was a nail slowly leaking air in my right rear tire. If your car has a TPMS (Tire Pressure Monitoring System), you can even see which specific tire has the issue on the dashboard. Besides tire pressure problems, it could also be a brake system warning, such as excessively worn brake pads or insufficient brake fluid. I suggest not pushing your luck and going straight to a repair shop to read the trouble codes for peace of mind. Also, developing the habit of walking around your car to check tires before driving is really important, especially before highway trips.
Was this review help?
13
5
Share
Expand All
More Forum Discussions

What Are the Reasons for Insufficient Airflow from Car Air Conditioning?

If the airflow is relatively small when using the external circulation mode but normal when using the internal circulation mode, it is likely due to a clogged cabin air filter. In this case, replacing the cabin air filter with a new one should resolve the issue. If the airflow remains small regardless of the circulation mode, it may involve issues such as internal air duct flaps. This situation is less common than the former. It is recommended to first check the cabin air filter. Replace the cabin air filter if it is too dirty and blocking the airflow into the car. When the refrigeration system is operating, the refrigerant circulates in different states within this closed system, with each cycle consisting of four basic processes: 1. Compression process: The compressor inhales low-temperature, low-pressure refrigerant gas from the evaporator outlet and compresses it into high-temperature, high-pressure gas, which is then discharged from the compressor. 2. Heat dissipation process: The high-temperature, high-pressure superheated refrigerant gas enters the condenser, where the pressure and temperature decrease, causing the refrigerant gas to condense into a liquid and release a significant amount of heat. 3. Throttling process: The higher-temperature and higher-pressure refrigerant liquid passes through the expansion device, where its volume increases, and the pressure and temperature drop sharply, exiting the expansion device as a mist (fine liquid droplets).
17
2
Share

How to open the door inside the XPeng P7?

You can set the vehicle to automatically unlock when the key is detected and automatically lock when you move away from the vehicle. Swipe this card on the B-pillar sensing area to unlock and lock the car. Normally wearing the watch, simply sense it near the B-pillar sensing area without contact to unlock and lock the car.
20
1
Share

Where to Check Tire Pressure for the 7th Generation Elantra?

The tire pressure for the 7th generation Elantra can be checked on the display screen, with the normal tire pressure typically around 2.2-2.5 bar. Tire pressure monitoring involves real-time automatic monitoring of tire pressure during vehicle operation, alerting the driver to leaks or low pressure to ensure driving safety. There are three commonly used tire pressure monitoring methods: Direct Tire Pressure Monitoring: Direct tire pressure monitoring devices use pressure sensors installed in each tire to directly measure tire pressure. The pressure information is transmitted wirelessly from inside the tire to a central receiver module, which then displays the tire pressure data. The system automatically alerts when the tire pressure is too low or there is a leak. Indirect Tire Pressure Monitoring: When the pressure in a tire decreases, the vehicle's weight causes the rolling radius of that wheel to become smaller, making it rotate faster than the other wheels. By comparing the rotational speed differences between tires, the system monitors tire pressure. Indirect tire pressure alert systems essentially rely on calculating the rolling radius of the tires to monitor pressure. Tire Pressure Monitoring System (TPMS) Introduction: It combines the advantages of both systems mentioned above, equipping direct sensors in two diagonally opposite tires and incorporating a four-wheel indirect system. Compared to a full direct system, this hybrid system can reduce costs and overcome the indirect system's inability to detect simultaneous low pressure in multiple tires. However, it still cannot provide real-time data of the actual pressure in all four tires like a direct system.
19
4
Share

Does Snow Melting on the Car Damage the Paint?

Most modern car paints are metallic finishes, which are generally unaffected. The key issue is that urban snow, due to pollution, contains acidic and alkaline corrosive substances that can slightly erode the car paint. Especially when snow treated with de-icing agents splashes onto the car, it can corrode the paint, chassis, and tires, harming the paint. It's advisable to wash the car promptly. To protect the paint, it's recommended to apply a glaze sealant at a 4S shop every late autumn, which helps maintain the paint in better condition. Daily car paint maintenance methods include: 1. Prompt dust removal: Clean dust off the car body before, during, and after use to minimize static electricity attracting dust. 2. Wash the car after rain: Raindrops on the car gradually shrink, increasing the concentration of acidic substances. If not rinsed with clean water promptly, the paint can be damaged over time. 3. Avoid washing the car in high temperatures: Wash the car only after the engine has cooled down, and avoid washing under direct sunlight or high temperatures to prevent detergent residues from drying and leaving marks. When washing the car yourself, use specialized detergents and neutral water, avoiding highly alkaline laundry detergents, soapy water, or strong cleaners to prevent stripping the paint's protective oils and accelerating aging.
3
0
Share

What are the models of W221 Mercedes-Benz?

W221 Mercedes-Benz has three models: W221 S350, W221 S600, and W221 S500. W221 is the chassis code for the ninth-generation S-Class of Mercedes-Benz, which was launched in 2008. The S-Class is a large sedan under the Mercedes-Benz brand. The standard configuration of the Mercedes-Benz S350 includes: Automatic climate control system with dust and activated carbon filter, button ignition, front passenger, COMAND control and display system, cruise control with variable speed limiter and electronic speed limit function, electrically adjustable steering column with easy-entry function, electric seats with lumbar support, headlight delay-off function, speed-sensitive variable power steering, PRESAFE system, etc.
9
5
Share

Where is the USB port in the GLC260?

The GLC260 has three USB ports, with two located inside the center armrest and one at the rear air conditioning vent. These USB ports allow you to connect a USB drive to the vehicle, enabling the car's multimedia entertainment system to play songs from the drive. Additionally, you can connect external devices like smartphones for phone mirroring and connectivity purposes, and they can also power devices such as dash cams. The location of USB ports may vary depending on the vehicle model, but they are typically found on the central dashboard, inside the center armrest, or near the rear air vents. Owners are advised to consult the vehicle's user manual to locate the USB ports before use.
10
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.