What does the yellow exclamation mark on the Elysion dashboard mean?

2 Answers
StEvan
07/25/25 7:43am
The appearance of an exclamation mark on the car dashboard indicates an abnormality or malfunction in the corresponding system. Here is a detailed introduction to the exclamation mark warning light: General faults: An exclamation mark inside a triangle: If this symbol lights up, it indicates a fault in the car's general performance, components, or functions. Common issues include parking sensor failure, fuel cut-off system intervention or malfunction, external light failure, engine oil pressure sensor failure, etc. It is necessary to visit a 4S shop for inspection to identify the source of the fault. Automatic transmission fault: A yellow gear with an exclamation mark inside: This is the automatic transmission fault warning light, indicating a fault in the transmission or transmission lubricant level below the normal range. The transmission oil should be replaced promptly. Brake system fault: An exclamation mark inside a circle with parentheses: This represents a warning for the brake system, mainly indicating a brake system malfunction or low brake fluid level. The brake system should be inspected immediately to avoid accidents. Tire pressure abnormality: An exclamation mark with a horizontal line below parentheses: This represents the tire pressure monitoring warning light, which lights up when the car's tire pressure is too low. Check the tire pressure and restore it to the normal range. Lighting fault: A yellow bulb with an exclamation mark: This is the lighting fault indicator, indicating a malfunction in one of the car lights. Solution: Visit a 4S shop for inspection as soon as possible, or check it yourself by focusing on commonly used bulbs such as turn signals, fog lights, and interior lights to identify the problem. In addition, during daily use of the vehicle, the warning lights displayed on the dashboard are divided into two different colors: yellow and red: Yellow indicates a fault in the corresponding system, but the problem is not very serious. Reduce speed and proceed to the nearest repair point for maintenance to eliminate potential safety hazards in time. Red indicates a very serious problem in the corresponding system. If this occurs, do not continue driving. Pull over immediately and call for professional assistance to prevent unpredictable dangers to the vehicle and personal safety caused by forced driving. It is important to note that when the car is started, all lights will turn on as the system performs an automatic check. After the check is completed, the lights will turn off automatically. If a light does not turn on when the ignition is switched on, remains lit without turning off, or lights up while driving, it indicates a fault in the related system. In such cases, seek professional help promptly for inspection and elimination of potential safety hazards.
Was this review help?
16
0
Share
SanMary
08/10/25 6:40pm
The yellow exclamation mark on the Elysion dashboard is usually a warning signal, indicating a problem with the vehicle system that requires inspection. The most common cause is low tire pressure, prompting inflation after detection by the tire pressure monitoring system. Alternatively, it could be a brake system warning, such as worn brake pads or insufficient brake fluid. Engine issues like elevated coolant temperature may also trigger it. Don't panic when you see this light, but be sure to stop and check the vehicle's condition. If the tires are normal, drive to a professional repair shop as soon as possible to diagnose the fault code. Delaying action may increase fuel consumption or safety risks. Safe driving is paramount, and regular maintenance can reduce such occurrences.
Was this review help?
17
2
Share
Expand All
More Forum Discussions

What is the fuel consumption of the Li ONE?

The Li ONE has a fuel consumption of 6.05 liters per 100 kilometers. Taking the 2020 Li ONE as an example, its body dimensions are: length 5020mm, width 1960mm, height 1760mm, with a wheelbase of 2935mm, a fuel tank capacity of 45 liters, and a curb weight of 2300kg. The 2020 Li ONE features a MacPherson strut front suspension and a multi-link independent rear suspension. It is equipped with a 1.2-liter turbocharged engine, delivering a maximum horsepower of 131PS and a maximum power of 96kW, paired with a fixed gear ratio transmission.
11
3
Share

Does the Honda Inspire Refined Edition have any hidden features?

The Honda Inspire Refined Edition does not have any hidden features. Taking the 2019 Honda Inspire as an example, it is a mid-size sedan with the following dimensions: length 4910mm, width 1862mm, height 1450mm, wheelbase 2830mm, fuel tank capacity 48l, and curb weight 1574kg. The 2019 Honda Inspire features a MacPherson strut front suspension and a multi-link independent rear suspension. It is equipped with a 2.0L naturally aspirated engine producing a maximum horsepower of 146PS, maximum power of 107kW, and maximum torque of 175Nm, paired with an electronic continuously variable transmission.
12
5
Share

What is the actual fuel consumption of the Elantra?

The actual fuel consumption of the Elantra is 7L. Taking the 2016 Elantra as an example, it belongs to a mid-size SUV with body dimensions of 4570mm in length, 1775mm in width, and 1445mm in height, a wheelbase of 2700mm, a fuel tank capacity of 50L, and a curb weight of 1233kg. The 2016 Elantra features a MacPherson strut front suspension and a torsion beam rear suspension. It is equipped with a 1.6L naturally aspirated engine, delivering a maximum horsepower of 128PS, a maximum power of 93.8kW, and a maximum torque of 156Nm, paired with a 6-speed manual transmission.
3
2
Share

What is the recommended tire pressure for the Malibu?

The normal tire pressure range for the Malibu is 2.4-2.5 bar. Due to seasonal factors, the tire pressure can be appropriately increased by 0.2 bar in winter and reduced by 0.1 bar in summer. This data is based on the international GBT2978-2008 standard requirements. If you want to check the current tire pressure of the Malibu during daily driving, you can activate the tire pressure monitoring system. The Malibu is equipped with an active tire pressure monitoring function, and the specific tire pressure values can be displayed on the central LCD screen of the instrument panel. Generally, a tire pressure exceeding 2.8 bar is considered too high, while a tire pressure below 2.0 bar is considered too low. Hazards of overinflated tires: Reduced tire friction and adhesion, affecting braking performance; causes steering wheel vibration and deviation, reducing driving comfort; accelerates localized wear of the tread center, shortening tire lifespan; increases vehicle vibration, indirectly affecting the lifespan of other components; overstretches tire cords, reducing elasticity and increasing the load on the vehicle during driving. Hazards of underinflated tires: Increased friction coefficient with the road surface, leading to higher fuel consumption; causes heavy steering and deviation, compromising driving safety; increases movement of tire components, leading to abnormal overheating due to excessive rolling; reduces cord and rubber functionality, causing delamination or cord breakage and excessive friction with the rim, damaging the bead area and causing abnormal wear; multiplies friction between the tire and ground, sharply raising tire temperature, softening the tire, and drastically reducing strength. High-speed driving may lead to tire blowouts. If the tire pressure monitoring indicator light comes on (a yellow symbol with an irregular circle, no stamp on top, four small spikes at the bottom, and an exclamation mark inside), there are generally three possible reasons: Abnormal tire pressure: Typically, an alarm is triggered when pressure is below 1.8 bar or above 3.0 bar. In this case, tire inspection and pressure adjustment are required. Tire pressure monitoring not reset: After inflating the tires, if the tire pressure monitoring system is not reset in time, it will continue to record the previous data, causing the indicator light to stay on. Simply reset the tire pressure monitoring system to resolve this issue. Damaged tire pressure sensor: The tire pressure sensor, installed inside the tire and connected to the inflation valve, monitors tire pressure. If the sensor is damaged due to impact while driving, the tire pressure warning light may illuminate. In such cases, the only solution is to replace the sensor with a new one.
5
5
Share

Can You Shift to P Gear When the Brakes Fail in an Automatic Transmission?

You cannot shift to P gear when the brakes fail in an automatic transmission. The method for using the automatic parking function is: simply press the automatic parking button on the vehicle to activate it. Automatic parking refers to the vehicle's intelligent electronic parking brake, which is a function within the braking system. After the vehicle comes to a stop, it automatically engages the parking brake to ensure safety, and lightly pressing the accelerator will automatically release the parking brake effect. Precautions for automatic transmissions include: 1. Do not shift into P gear while driving; 2. After driving, you must turn off the engine and shift into P gear before removing the key; 3. Do not shift into N gear to coast while driving; 4. When starting the vehicle in P or N gear, remove the gear lever from P gear while pressing the brake, turn on the power, press the brake and shift to N gear, then after ignition, shift into D gear to drive forward directly.
17
2
Share

How to Solve Cylinder Air Leakage?

Cylinder air leakage can be resolved through the following methods: 1. When the piston ring's elasticity weakens, replace the piston ring; 2. If the piston ring is stuck in the piston ring groove, use a triangular scraper to pry it open, file it smooth, and then reinstall it into the piston ring groove to ensure free rotation; 3. If the contact between the valve head and valve seat is not tight, and the erosion is not severe, re-grind them, clean thoroughly with kerosene, and then check with kerosene to confirm good sealing; 4. If the valve seat ring is loose, replace it. The engine's function is to convert the thermal energy of gasoline or diesel into mechanical energy by expanding gases after combustion in a sealed cylinder, thereby pushing the piston to perform work. The engine consists of: 1. Valve train; 2. Crankshaft connecting rod mechanism; 3. Ignition system; 4. Cooling system; 5. Lubrication system; 6. Starting system; 7. Fuel supply system. Engine maintenance methods include: 1. Using qualified engine oil; 2. Using qualified coolant and antifreeze; 3. Regularly cleaning the radiator scale; 4. Regularly removing engine carbon deposits; 5. Periodically replacing the three filters of the car; 6. Maintaining reasonable engine speed.
6
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.