What does the yellow exclamation mark on the Accord dashboard mean?

2 Answers
MaryMarie
07/24/25 1:04pm
The yellow exclamation mark on the Accord dashboard indicates a fault in the vehicle's braking system, which may be caused by excessive brake pad wear, sensor damage, insufficient brake fluid, or other reasons. There are three types of yellow exclamation marks on the dashboard: 1. A triangle with an exclamation mark in the middle, which is a general fault indicator; 2. A horizontal line under a bracket with an exclamation mark in the middle, which is the tire pressure monitoring warning light. This light turns on when the pressure in one of the vehicle's tires is too low; 3. A circle with an exclamation mark in the middle, which is the braking system warning light. This light turns on for a few seconds when the ignition is switched on and turns off after the engine starts. It also turns on when the handbrake is engaged and turns off when released. Additionally, it lights up when the brake fluid level is too low or when a fault occurs in the braking system while driving.
Was this review help?
15
2
Share
OCayden
08/11/25 7:09am
I've been driving an Accord for several years and have encountered the yellow exclamation mark light on the dashboard several times. This is usually a warning signal indicating that there is an issue with a certain system in the vehicle that needs to be checked. The most common reason is low tire pressure, possibly due to a puncture or slow leak, which triggers the tire pressure monitoring system alarm. Another common issue is a brake system warning, such as low brake fluid levels or worn brake pads, which can reduce braking performance and increase the risk of accidents. Sometimes, it may accompany the engine fault light, indicating that the engine might have a minor issue requiring diagnosis. I remember the last time the light came on was due to insufficient tire pressure, and it disappeared after I went to inflate the tires. However, if the light doesn't go off, don't push your luck—safety comes first. Check the owner's manual for error codes or head straight to the dealership for inspection. Developing habits like regularly checking tire pressure and scheduling routine maintenance can reduce the frequency of these warning lights. Always pay attention to the dashboard while driving and don't take it lightly.
Was this review help?
14
4
Share
Expand All
More Forum Discussions

What brand is the engine of the Dorcen G70s?

The engine of the Dorcen G70s is manufactured by Shenyang Mitsubishi, with the model code 4G63S4T. It delivers a maximum horsepower of 177ps and a peak torque of 250nm, with the maximum torque available between 2400 to 4400 rpm. As the first model produced by Dorcen Auto, the G70s is designed with a masculine theme. The front fascia features a large chrome-accented grille and bold, angular lines that emphasize its rugged style. The addition of full LED lighting and sequential turn signals gives the vehicle a sharper "eye-catching" appearance, while the sporty front bumper design and large fog light areas on both sides further enhance its striking presence.
14
2
Share

How to Check Your Driver's License Number?

There are three methods to check your driver's license number: 1. Driver's License: You can find it on your driver's license. On the duplicate copy of the license, the file number is located after the name in the third line. 2. Official Traffic Police Website: If you don’t have your driver's license with you, you can visit the provincial traffic police website, find the driver's license violation query section, enter your ID card number, and the driver's license file number will be displayed. 3. Vehicle Management Office: You can also bring your ID card to the vehicle management office where your driver's license was issued, and the staff will provide you with the information. Below is relevant information about the driver's license file number: 1. Origin of the Number: The driver's license file number consists of a 12-digit code, unique to each individual. The first four digits represent the administrative division code, and the last eight digits are the sequential number. Its main purpose is to establish a driver information management system for easy querying. 2. Location of the Number: The driver's license file number is a unique identifier generated by the traffic police department to distinguish driver's licenses, similar to an ID card. A person may have two driver's licenses with the same license number, but the file number is unique and will not be duplicated. The file number is usually located on the duplicate copy of the driver's license, specifically on the upper right side of the third line on the duplicate page. 3. Meaning and Function of the File Number: The file number is typically a 12-digit string. The first two digits represent the province code of the license, the third and fourth digits represent the county code, and the last eight digits are the sequential number assigned by the local vehicle management office.
2
0
Share

Is it illegal to install widebody kits on modified cars?

Installing widebody kits on modified cars is illegal. Below is relevant information about car modifications: 1. Purpose: To enhance power performance. The modification of the powertrain system is the most crucial aspect of car modification. To improve a car's power, it is necessary to replace components such as spark plugs, high-voltage wires, air filters, fuel-saving accelerators, water-fuel devices, horsepower boosters, electronic rectifiers, and exhaust pipes. 2. Modification Methods: Enhancing car performance by modifying the engine involves increasing engine power while reducing fuel consumption, lowering exhaust emissions, and extending the engine's lifespan. The primary goal is to ensure that the combustible gases entering the engine are fully and completely mixed, allowing the powerful spark plugs to ignite the mixture for complete combustion. This involves replacing and upgrading components and installing auxiliary products to improve engine performance from three aspects: the air intake system, electrical system, and fuel system. The biggest advantage of this method is that the modified parts can be easily installed and removed, allowing the engine to be restored to its original state when not in use.
15
1
Share

Can the Clutch Control Vehicle Speed?

The clutch can control vehicle speed. Below are techniques for using the clutch to control speed: 1. Place the ball of your foot on the clutch pedal with your heel touching the ground. When the clutch is fully depressed, keep your knee slightly bent. 2. Female drivers should avoid wearing high heels. Never use only the toes to press the pedal or lift the heel off the ground, as this may lead to insufficient force or slippage. 3. Remember the positions of the clutch, brake, and accelerator—left foot for the clutch, right foot for the accelerator and brake. Additional information: Below are precautions for clutch usage: 1. During normal driving, do not rest your foot on the clutch pedal. 2. Avoid riding the clutch (partial engagement) while driving. In special cases where partial engagement is necessary, minimize the duration to prevent burning the clutch friction disc. 3. Do not release the clutch too abruptly. Generally, first gear requires the slowest release, while other forward gears should be slightly quicker.
18
5
Share

What does CNL mean on a car?

CNL on the car steering wheel is an abbreviation for "cancel," meaning to deactivate the cruise control operation. More information about cruise control is as follows: 1. The cruise control system is also known as the speed control device, speed control system, or autonomous driving system. 2. The function of cruise control: After setting the speed as required by the driver, the vehicle automatically maintains the speed without the need to press the accelerator pedal, allowing the car to travel at a fixed speed. 3. The cruise control controller is generally located near the steering wheel and is mainly divided into lever-type, steering wheel button-type, and steering wheel control group-type.
10
3
Share

How to judge the distance around the car?

Methods to judge the distance around the car: 1. Judge based on the position of the left wheels, provided that you know where the left wheels will pass to avoid the tires pressing on solid lines or avoiding potholes and stones on the road; 2. Judge through the side mirrors, which can observe the distance between the vehicle and the lane dividers to adjust the vehicle's position, or check the left and right distance through markers on the dashboard or the hood. When the speed exceeds 100 kilometers per hour, the safe distance should be more than 100 meters. According to the Road Traffic Safety Law of the People's Republic of China: When a motor vehicle is driving on the highway and the speed exceeds 100 kilometers per hour, the safe distance should be more than 100 meters; when the speed is below 100 kilometers per hour, the minimum safe distance should not be less than 60 meters.
1
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.