What does the yellow bulb exclamation mark mean?

2 Answers
LaDerek
07/29/25 8:34am
The yellow bulb exclamation mark is a light fault indicator, indicating that there is a fault with one of the vehicle's lights. It is recommended to go to a 4S shop for inspection and repair as soon as possible. You can also check it yourself first, focusing on commonly used bulbs such as turn signals, fog lights, and interior lighting. The dashboard lighting up with a fault indicator is essentially the ECU's intelligent alarm for the fault. In addition to the possibility of a bulb being damaged, the bulb fault light may also be caused by a loose connection. You can easily locate the fault point by checking which light is not working. There are also many other indicators on the dashboard with exclamation marks, such as the tire pressure indicator, transmission fault indicator, and windshield wiper fault indicator, which are also yellow with exclamation marks. Therefore, it is important to identify the cause of the fault before taking appropriate action.
Was this review help?
15
5
Share
EllianaLee
08/11/25 6:07pm
Having driven for so many years, I've encountered the yellow bulb exclamation mark on the dashboard quite a few times. This usually indicates a malfunction with your rear taillights, such as a burnt-out bulb or poor circuit contact. I remember the last time this light came on when I was driving late at night, and a friend texted me saying my car's taillights were barely visible, which scared me into slowing down and heading straight home. This is no trivial matter, especially during rain, snow, or on highways—if the car behind can't see your brake lights clearly, it's easy to cause a rear-end collision. It's best to check immediately and not wait too long. Open the trunk to see if the bulb has blackened; a simple replacement might do the trick. If that doesn't work, it could be a fuse issue or a short circuit in the wiring. Delaying repairs might affect other lights as well. Safe driving is paramount; spending a little money to have it professionally fixed solves the problem. Cultivate the good habit of regularly checking your lights to prevent such unexpected issues.
Was this review help?
6
3
Share
Expand All
More Forum Discussions

How to Use a Manual Jack?

Here are the specific steps for using a manual jack: 1. Place a non-slip pad (such as a rubber mat) under the base of the jack, then position the jack under the vehicle for lifting. 2. When the top of the jack contacts the chassis, ensure it is properly supported and lift the vehicle until the wheels are off the ground. 3. Using a jack is very simple, but always remember to keep it level, stable, and slow during operation. It is strongly emphasized never to crawl under the vehicle while using a car jack, as it poses significant risks. Below is some relevant information about jacks: 1. A jack is a compact lifting device that uses a rigid lifting component as its working mechanism to elevate heavy objects within its stroke range via a top saddle or bottom claw. 2. Car jacks can be categorized into four types: rack jacks, screw jacks, hydraulic jacks, and pneumatic jacks. A rack jack consists of a rack, gear, and handle, and operates by turning the handle to raise or lower the rack. 3. Hydraulic jacks are further divided into general-purpose and specialized hydraulic jacks, with a relatively complex working principle. Their advantages include faster lifting speeds and greater load-bearing capacity compared to rack jacks. Screw jacks rely on thread self-locking to support heavy loads and have a simple structure with high weight capacity. However, their efficiency is lower, with slow lifting and fast lowering speeds. Pneumatic jacks are less common and operate by inflating with vehicle exhaust, making them relatively unknown due to their unique usage conditions.
1
2
Share

What is the vehicle scrapping period?

Non-operational vehicles and operational vehicles have different scrapping periods, as detailed below: Scrapping regulations for non-operational vehicles: For household 5-seat cars and 7-seat SUVs, non-operational small and micro vehicles have no usage period limit. When the normal mileage reaches 600,000 kilometers, the state will guide the scrapping. In addition to the above vehicles, small and micro non-operational passenger cars, large non-operational cars, and wheeled special machinery vehicles also have no usage period limit. Common scrapping regulations for operational vehicles: Small and micro taxi passenger vehicles have a scrapping period of 8 years, medium-sized taxi passenger vehicles have a scrapping period of 10 years, and large taxi passenger vehicles have a scrapping period of 12 years. Public transport passenger vehicles have a scrapping period of 13 years, other small and micro operational passenger vehicles have a scrapping period of 10 years, and large and medium-sized operational passenger vehicles have a scrapping period of 15 years. Micro operational trucks have a scrapping period of 8 years, light and large operational trucks have a scrapping period of 10 years. The vehicle scrapping process is as follows: The owner of the vehicle applying for scrapping and renewal should fill out the "Motor Vehicle Change, Transfer, Modification, Suspension, Scrapping Approval Application Form" in duplicate and affix the owner's seal. The registration office will accept the application and issue a "Vehicle Scrapping Notice" for vehicles that have reached the scrapping period. For vehicles that have not reached the scrapping period, the motor vehicle inspection office will determine if they meet the scrapping standards and issue a "Vehicle Scrapping Notice". The vehicle owner can choose a qualified recycling company to dismantle the vehicle with the "Notice". The recycling company will dismantle the vehicle and take photos after verifying the "Notice". The engine must be separated from the vehicle, the engine block must be broken, and the frame (chassis) must be cut. The vehicle owner should submit the "Change Form", "XX Province Vehicle Renewal Technical Appraisal Form", "Scrapped Vehicle Recycling Certificate", and photos of the dismantled vehicle to the motor vehicle inspection office for verification and signature. The license plates will be recovered, and the scrapping registration will be processed according to regulations. Special notes: According to Article 30 of the "Motor Vehicle Registration Regulations", if the vehicle is damaged and cannot be driven back to the registration location, the owner can sell the scrapped vehicle to a local motor vehicle recycling company. If an operational vehicle is converted to a non-operational vehicle, it must be scrapped according to the original operational vehicle's scrapping period. According to Article 43 of the "Motor Vehicle Registration Regulations", after completing the transfer or cancellation of motor vehicle registration, the original owner can apply to the vehicle management office to use the original license plate number when registering a newly purchased motor vehicle. The application to use the original license plate number must meet the following conditions: (1) The application must be submitted within six months after the transfer or cancellation of registration; (2) The owner must have owned the original vehicle for more than three years.
13
2
Share

What are the skills for right-angle turning in Subject 2?

Subject 2 right-angle turning skills are as follows: 1. During a right-angle turn, keep the car body close to the right side, maintaining a distance of about 30 centimeters between the car body and the roadside yellow line. This increases the turning radius and helps avoid crossing the line during the turn. 2. When the left rearview mirror aligns parallel with the transverse road, turn the steering wheel fully to the left. During the turn, pay attention to the distance between the car door handle and the road corner, and control the speed to make a slow turn. 3. While turning, observe the left rearview mirror. When you are about to touch the corner, quickly turn the steering wheel to the right. After the wheels pass the right angle, turn the steering wheel fully again. Straighten the steering wheel before the car head is aligned, then continue driving.
15
5
Share

What brand is Rotalla tires?

Rotalla is the brand name of Letaile tires, primarily used for passenger cars. They are produced by Shandong YongSheng Rubber Group, which has passed the ISO9001 International Quality System Certification in one go, successfully achieving both "Safety Certification" and "3C" certification. These tires are known for their high cost-performance ratio. Shandong YongSheng Group was established in 1986. The company is a comprehensive tire manufacturer engaged in development, production, and sales. It is equipped with advanced production and testing facilities from Japan, the USA, Germany, and other countries, featuring high automation levels, ease of operation, and reduced labor intensity. Its famous tire series include YongSheng, Qichuang, and Bowei. Tires are often used under complex and demanding conditions, enduring various deformations, loads, forces, and high and low temperatures during operation. Therefore, they must possess high load-bearing capacity, traction performance, and cushioning performance, along with high wear resistance and flex resistance, as well as low rolling resistance and heat generation. Directly in contact with the road surface, tires work with the vehicle's suspension to mitigate impacts during driving, ensuring good ride comfort and smoothness. They also ensure excellent adhesion between the wheels and the road, improving the vehicle's traction, braking, and passage capabilities, while bearing the vehicle's weight. Methods for maintaining Letaile tires: Enhance awareness of tire safety and inspect tires regularly. Regularly correct wheel balance; unbalanced wheels can cause high-frequency oscillations at high speeds, leading to uneven tire wear. Perform tire rotation periodically; to maintain even wear across all tires on a vehicle, rotate them every 5,000 kilometers. In daily use of Letaile tires, pay attention to the following points: Regularly check the tire surface for cracks, deformations, or other defects. As tires wear, the tread grooves gradually become shallower. If the tread wears flat, it loses its drainage and anti-slip functions, significantly reducing the vehicle's performance. Small cracks can also be potential hazards for blowouts at high speeds. Additionally, promptly remove pebbles from the grooves. Park on level ground whenever possible. Avoid parking on roads with thick, sharp, or pointed stones. Do not park near or in contact with petroleum products, acids, or other materials that can deteriorate rubber. After parking, avoid turning the steering wheel, as this accelerates tire wear. Do not splash water to cool down. In hot weather or during high-speed driving, tires can overheat, increasing air pressure. In such cases, stop to allow the tires to cool naturally. Avoid releasing air to reduce pressure or splashing water to cool down, as this can cause abnormal aging of the tread rubber. Avoid sudden braking. Try to minimize frequent or abrupt braking to prevent accelerated tread wear from dragging on the road.
6
2
Share

What Causes an Automatic Transmission to Rev in D Gear Without Moving?

Here are the reasons why an automatic transmission may rev in D gear without moving: 1. Component failure issues: Problems with components such as the transmission shift valve, transmission solenoid valve and electronic module, or engine throttle. 2. Operational issues: Improper operations like not engaging the gear fully, not releasing or fully releasing the handbrake. 3. Inadequate maintenance: Insufficient transmission fluid leading to low internal oil pressure. 4. Brake lock-up, which prevents the wheels from moving forward and may produce noise when accelerating. Related information about automatic transmission gears is as follows: 1. Automatic transmission cars have five gears: P, R, N, D, L. P stands for Parking, R for Reverse, N for Neutral, D for Drive, and L for Low gear. 2. The L gear is often used for steep slopes, waterlogged roads, bumpy roads, speed-limited roads, congested roads, or heavy-load starts. 3. When waiting at a red light in an automatic transmission car, it is recommended to shift to Neutral. If the wait is long, you can also engage the handbrake. Keeping the car in D gear while pressing the brake at a red light is equivalent to pressing both the accelerator and brake in a manual transmission car. This situation increases fuel consumption, and prolonged use can put excessive stress on the torque converter, accelerating wear and tear on components like the torque converter.
9
4
Share

What is the real range of the Han EV?

The range of the four-wheel-drive version is 550 kilometers, while the front-wheel-drive version has a range of 605 kilometers. The BYD Han is a mid-to-large-sized car under BYD, with dimensions of 4980mm in length, 1910mm in width, and 1495mm in height, and a wheelbase of 2920mm. Here are some related details: 1. The front-wheel-drive version of the BYD Han EV is a single-motor model, while the four-wheel-drive version is a dual-motor model. The front-wheel-drive version's motor has a maximum power of 163kW and a maximum torque of 330 Nm. 2. The four-wheel-drive version has motors on both the front and rear axles, with a total motor power of 363kW and a total torque of 680 Nm. This car uses lithium iron phosphate batteries, which have lower costs compared to ternary lithium batteries and also offer better safety. The cathode of the lithium iron phosphate battery is made from lithium iron phosphate. 3. The BYD Han uses MacPherson independent suspension at the front and multi-link independent suspension at the rear. Using independent suspension on both ends improves the car's handling and ride comfort. The MacPherson suspension is a commonly encountered independent suspension with a relatively simple structure and wide application. 4. The multi-link suspension is a more complex independent suspension, which is an improvement based on the double-wishbone suspension. This suspension replaces the two wishbones of the double-wishbone suspension with separate links. The multi-link suspension enhances the wheel's grip.
11
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.