What does the wrench symbol on the display mean?

What are the symptoms of a faulty body control module?

When the body control module fails, some electrical components in the vehicle may malfunction, such as lights, wipers, power windows, door locks, etc. Here is relevant information about the body control module: 1. Introduction 1: The BCM (Body Control Module) serves as the electrical core of the vehicle, monitoring body-related functions (like lights, windows, door locks) and acting as a gateway for CAN and LIN networks. 2. Introduction 2: Load control can communicate directly with DBM or through CAN/LIN with remote ECUs. The body control module integrates and manages safety and comfort features along with the power management system. The BCM also provides diagnostic information during vehicle maintenance and repair.

2

3

Share

Which is Faster Between Manual and Automatic Transmissions of the Same Displacement?

Manual transmission models of the same vehicle are generally faster. This is because automatic transmissions respond to the optimal shift timing, which is constrained by the vehicle's computer logic, such as overheating protection, forced upshifts, and other factors. Automatic transmissions are not as efficient as manual ones, whereas manual transmissions offer greater freedom and flexibility. Typically, manual transmissions can achieve a transmission efficiency of over 90%, while automatic transmissions with torque converters experience power loss, usually around 70%-80%. Differences between manual and automatic transmission models: 1. Purchase price: For the same brand and model, manual transmission cars are approximately 10,000 to 20,000 RMB cheaper than automatic ones. 2. Maintenance costs: Manual transmission cars have much lower maintenance costs compared to automatic ones. Since automatic transmissions are foreign technology, China's current research and development in this area is not yet mature, leading to higher maintenance costs for automatic transmissions. 3. Driving experience: Manual transmission cars allow drivers to truly experience the joy of driving, offering a sense of control and engagement. Automatic transmission cars lack these sensations—once in gear, the car can be driven with minimal input. Apart from the steering wheel, brakes, and accelerator, everything else is controlled by the computer, creating a feeling that the car is controlling the driver.

6

0

Share

Do Tianjin vehicles need to apply for a Beijing entry permit?

Tianjin-licensed vehicles traveling to Beijing require a Beijing entry permit and are not subject to the license plate restriction policy, but they are subject to traffic restrictions. Each vehicle can apply for a Beijing entry permit up to 12 times per year, with each permit valid for a maximum of 7 days. There are two types of Beijing entry permits: short-term and long-term. The short-term permit is simpler and more convenient to apply for, requiring fewer materials, while the long-term permit requires a tailpipe emissions test. Below are the details for both types of permits: 1. Short-term Beijing entry permit: Validity: 7 days. Applicable to: Non-local vehicles that will stay in Beijing for a short period or are passing through. Application locations: Highway and national road entry checkpoints or local traffic police stations. 2. Long-term Beijing entry permit: Validity: 6 months. Applicable to: Non-local vehicles that have long-term residency needs in Beijing. Application locations: Traffic police stations in the area of residence (where the temporary residence permit is registered).

19

2

Share

What is the valve clearance for Weichai Natural Gas P13?

The gap between the end of the valve stem and the components of the valve transmission group when the valve is fully closed is called the valve clearance. The size of the valve clearance is determined by the engine manufacturer through testing. Generally, in a cold state, the intake valve clearance is 0.25mm~0.35mm, and the exhaust valve clearance is 0.30mm~0.35mm. Hazards of excessive or insufficient valve clearance: 1. Too small: If the valve clearance is too small, the engine may experience air leakage due to improper valve closure in a hot state, leading to reduced power or even valve burning. 2. Too large: If the valve clearance is too large, it will cause impact noise between the transmission components and between the valve and valve seat, accelerating wear. At the same time, it will also reduce the duration of valve opening, worsening the cylinder's air intake and exhaust conditions.

20

1

Share

What is the Header?

Header exhaust, also known as the exhaust header, serves as the initial stage of the exhaust system. It connects to the engine via the "exhaust manifold" (commonly referred to as "banana" in Chinese). A four-cylinder engine typically has four exhaust manifolds. The primary function of the header is to merge these four exhaust manifolds from the engine's cylinders into a single pipe. Additionally, the header houses a catalytic converter. Common causes of white smoke from the exhaust pipe include: 1. Water in the fuel, or engine coolant leaking into the cylinders due to a damaged cylinder head gasket, cracked cylinder liner, or cylinder head. 2. Severe wear on the camshaft of a particular cylinder's fuel injection pump, causing delayed injection timing and incomplete combustion of diesel, resulting in white smoke. 3. Poor fuel injector atomization or the presence of multiple washers beneath the injector. When replacing injectors, ensure to remove any copper washers inside. 4. Leakage in a water-cooled intercooler, allowing coolant to enter the cylinders through the intake manifold. 5. Faulty turbocharger turbine-side seal ring, allowing engine oil to leak directly into the exhaust pipe, forming "white smoke." If white smoke is severe and other components appear normal, thoroughly inspect the turbocharger for oil leaks. 6. Extremely low ambient temperatures making it difficult for the cylinders to warm up, especially noticeable as white smoke during cold starts in the morning. This typically transitions to blue smoke as the engine warms and eventually becomes colorless, which is normal and should not be mistaken for a fault. 7. If the engine suddenly loses power while driving accompanied by heavy white smoke, this is usually caused by excessively delayed fuel injection timing.

3

2

Share

Is it normal to have small bubbles after applying car film?

First of all, bubbles after applying the film are mostly caused by incomplete cleaning of the glass during the process. Just like applying a screen protector to a phone, even a small amount of dust can cause bubbles. For large-scale applications like car films, some dust is inevitable, so having bubbles is quite normal. The functions of car film are as follows: 1. Heat insulation and sun protection: The film can effectively block a large amount of heat generated by infrared rays. 2. UV protection: Medium and long-wave ultraviolet rays can penetrate thick glass, but applying a heat-insulating film can block most UV rays, protecting the skin and reducing the aging of car interiors. 3. Safety and explosion-proof: The base layer of the film is made of polyester, which has excellent tear and puncture resistance. Combined with the adhesive layer, the film enhances the glass strength, preventing injuries from accidental glass breakage. 4. Creating a private space: By choosing the right type, the film ensures that the interior is not visible from the outside while maintaining clear visibility from the inside, preserving privacy and safety. 5. Reducing air conditioning consumption: The heat-insulating film compensates for the loss of air conditioning cooling capacity, instantly lowering the interior temperature and saving fuel to some extent. 6. Enhancing aesthetics: Depending on personal preference, the film can be used to personalize and beautify the car. 7. Anti-glare: Reduces accidents caused by glare factors.

19

4

Share

What does the wrench symbol on the display mean?

What are the symptoms of a faulty body control module?

Which is Faster Between Manual and Automatic Transmissions of the Same Displacement?

Do Tianjin vehicles need to apply for a Beijing entry permit?

What is the valve clearance for Weichai Natural Gas P13?

What is the Header?

Is it normal to have small bubbles after applying car film?

Will Points Be Deducted If the Rearview Mirror Crosses the Line During Reverse Parking?

What is the appropriate tire pressure for Maxus V80?

Where is the left front fender located?

Why Can't the Volkswagen Car Key Unlock the Door?