What does the wrench symbol on the car display mean?

1 Answers
OscarLynn
07/24/25 6:25pm
The wrench symbol on the car display is a reminder for the owner to perform vehicle maintenance. If the wrench indicator light comes on while driving, it is necessary to promptly visit a 4S shop for car maintenance to avoid potential malfunctions during operation. Due to differences in vehicle models, the mileage design may vary, and reference can be found in the car's maintenance manual. Many car owners tend to turn off the maintenance indicator light while driving, but it is recommended to keep it on. The maintenance light serves as a reminder for timely maintenance. If the car is not maintained in time, unnecessary wear and tear may occur during driving, affecting the vehicle's lifespan. Only by properly maintaining the car can it operate in a better condition.
Was this review help?
1
3
Share
More Forum Discussions

Is the Mercedes-Benz E300L imported?

The Mercedes-Benz E300L is not imported; it is the long-wheelbase version. The imported version of the Mercedes-Benz E-Class only comes in the standard-wheelbase version. Models with the letter 'L' denote the long-wheelbase version, which features an extended wheelbase compared to the standard version. The Mercedes-Benz E300L is equipped with a 2.0T turbocharged engine, delivering a maximum power of 245 horsepower and a peak torque of 370 Nm, paired with a 9-speed automatic transmission. The dimensions of the Mercedes-Benz E300L are 5078mm in length, 1860mm in width, and 1484mm in height, with a wheelbase of 3079mm. The Mercedes-Benz E300L adds features such as a rearview camera, a one-touch trunk closing system, and a rear entertainment system. Rear passengers can also freely adjust and control the front seats, and the rear seat cushions are deeper than before, fully ensuring the comfort of rear passengers.
17
4
Share

What is the reason why the center control display screen of Hyundai Elantra does not light up?

The reasons why the center control display screen of Hyundai Elantra does not light up: 1. Press and hold the power button for 5 seconds, but the screen does not light up and the power indicator light (green light) does not light up or lights up and then immediately turns off, indicating that the product battery is dead; 2. Pull out the display screen's ribbon cable and reinsert it to secure it. If the display screen lights up, it means the display screen ribbon cable connector was loose; 3. If it happens occasionally, it is normal because when starting the car, the instantaneous power is used for ignition, resulting in lower voltage. The Elantra is a global model of Hyundai that was first launched overseas, equipped with a 1.6L engine and a 1.8L engine. In terms of body size, the Elantra has a length, width, and height of 4570mm, 1800mm, and 1440mm respectively, with a wheelbase of 2700mm.
18
4
Share

How many kilometers can a new car drive before going on the highway?

New cars can be driven on the highway after about 500 kilometers. Generally, the break-in period is divided into three stages: 1. The initial stage is 0 to 500 km, with the speed maintained at 60 to 70 km/h; 2. The middle stage is 500 to 1000 km, and the speed can be increased to 90 to 100 km/h; 3. The later stage is 1000 to 2000 km, and the speed can be increased to below 120 km/h. During the entire break-in period, it is necessary to control the speed and RPM, avoid aggressive driving, sudden acceleration, hard braking, or sharp steering. Generally, after a 3000 km break-in period, the car's performance and fuel efficiency will reach a relatively optimal state.
17
3
Share

What is a MAF Sensor?

MAF sensor is an air flow sensor, also known as an air flow meter, and it is one of the important sensors in a car's electronic fuel injection engine. The amount of air inhaled by the engine during operation determines the fuel injection amount of the engine. The air intake serves as a crucial basis for fuel injection. If the air flow sensor malfunctions, the onboard computer will not receive accurate signals, leading to abnormal fuel injection control and affecting the engine's normal operation. MAF working principle: After external air enters the throttle, it flows through the sensor. Once it enters the engine, it carries away a significant amount of heat. The greater the external air flow, the more heat is removed. To maintain the necessary temperature of the air flow sensor, additional current is required to heat the sensor, which then adjusts the air flow size through current regulation.
7
4
Share

Does 84 Disinfectant Affect Car Paint?

84 disinfectant does affect car paint as it is highly corrosive and not recommended for vehicle cleaning. 84 disinfectant has a certain corrosive effect on aluminum, copper, carbon steel, etc. If not sufficiently diluted, it can also corrode car paint. It is a chlorine-based disinfectant, and chlorine is a volatile gas, so the container holding the disinfectant must be tightly sealed; otherwise, the disinfection effect will be compromised. In traditional painting processes, car paint is divided into four layers, collectively providing protection and aesthetic appeal to the vehicle body. With advancements in technology, more complex processes can achieve up to seven or eight layers. Taking the traditional four-layer paint as an example, from the inside out, they are the electrophoretic layer, the intermediate coat, the color coat, and the clear coat.
2
3
Share

How Long Does It Take to Get a License Plate for a New Car?

Official license plates usually take around three to five working days to be issued. Before registering a new car, you need to prepare the vehicle qualification certificate, keep the triplicate car purchase invoice, pay the vehicle purchase tax to obtain the tax payment certificate, prepare copies and originals of your ID card, and go to the vehicle management office for registration and inspection. Then, you can select a license plate number. After about five working days, you can collect the license plate either by picking it up at the vehicle management office or having it delivered to your home via express mail. Costs for new car license plate registration: 1. Criminal investigation fee: 50 yuan 2. Documentation, photography, and rubbing fee: 110 yuan 3. Administrative fee: 143 yuan 4. Inspection fee: 125 yuan (can be waived) The total for the above four items is 428 yuan. For license plate delivery, the vehicle management office generally uses China Post Express Mail, which usually arrives within seven days after mailing. Some regions may not provide SMS or tracking number notifications. In such cases, you can open a browser on your computer and search for "China Post Logistics Tracking" using Baidu. After entering the tracking number, you can check the progress of your mailed item. Alternatively, you can search for the China Post App via the Baidu App and download it from the official China Post website. After downloading, open the app, register your information, and click on the search bar at the top of the page to enter the mail tracking page. Then, select "vehicle license plate" and enter the plate number to check the progress of plate production and delivery. Steps to register a new car at the vehicle management office: 1. Obtain the vehicle qualification certificate. This document is crucial for license plate registration. Some car dealerships may delay providing it, which can postpone your registration. Therefore, communicate firmly with the dealership to get the certificate as soon as possible. 2. Keep the triplicate car purchase invoice. The dealership will issue this invoice, which is necessary for registration. The invoice comes in red, yellow, and blue copies; usually, the red and yellow copies are submitted, while the yellow copy is kept for personal records. 3. Pay the vehicle purchase tax and obtain the tax payment certificate. After purchasing the car, promptly pay the tax at the nearest vehicle management office and keep the certificate safe. 4. Register and inspect the vehicle at the vehicle management office. Once all documents are ready, go to the office for registration. A traffic police officer will inspect the vehicle, checking the VIN, exterior, and warning triangle. Prepare these in advance. 5. Select a license plate number. After inspection, you can choose a number at the office, either by self-selection or random selection. Note that most desirable self-selected numbers may already be taken. How to check license plate production progress on 12123: Register and log in to the 12123 App, where you can view the progress under "Online Application Status." Once the plate is made and shipped, you can track the logistics. If you’ve bound your phone number, you’ll also receive an SMS notification. The vehicle management office typically takes 15-20 minutes to make a license plate, but processing times may vary depending on whether it’s peak or off-peak season.
8
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.