What does the wrench symbol mean when starting a Volkswagen Polo?

Why can't front fog lights and rear fog lights be turned on simultaneously?

Front fog lights and rear fog lights can be turned on simultaneously. After turning on the parking light switch and the parking lights are illuminated, then turn on the fog light switch. Some vehicles have an ON position marked, and for rear fog lights, some require the front fog lights to be turned on first before operating the switch, while others do not. This depends on the specific vehicle model. Although they are controlled separately, the rear fog lights can be turned on together with the front fog lights. If you want both front and rear fog lights to be on simultaneously, simply turn the light switch to the rear fog light position. More details are as follows: 1. Front fog lights are positioned lower and have non-directional light sources. When driving on uneven roads at night, neither high beams nor low beams can clearly illuminate the road ahead. In such cases, turning on the front fog lights is a good option. 2. Fog lights have strong penetration in foggy conditions, making it easier for other vehicles or pedestrians to notice them early in low-visibility weather, thereby effectively preventing accidents. 3. Fog lights can significantly interfere with the vision of other drivers, so it is advisable to avoid using them during normal driving to prevent inconvenience to other road users.

11

4

Share

At what mileage should the timing belt of a car generally be replaced?

The replacement cycle for a car's timing belt is generally recommended when the vehicle reaches 60,000 kilometers. The specific replacement interval depends on the wear and tear of the belt. Typically, the maintenance manual provided by the manufacturer only gives an approximate maintenance cycle. In reality, the quality of belts varies, and aging conditions differ under different usage environments. Therefore, it is advisable to assess each vehicle individually and address any issues promptly. Below is relevant information: 1. Introduction to the timing belt: The timing belt is a crucial component of the engine's valve system. It connects to the crankshaft and ensures the accuracy of intake and exhaust timing through a specific transmission ratio. Belts are used instead of gears for transmission because they produce less noise, offer precise transmission, have minimal variation, and are easy to compensate. 2. Function: When the engine is running, the piston's movement (up and down), the opening and closing timing of the valves, and the ignition sequence must remain synchronized under the "timing" connection. Timing ensures that each cylinder operates precisely: the piston reaches the top dead center, the valve closes exactly, and the spark plug ignites at the right moment.

11

4

Share

What is the fuel consumption of the Geely New Vision?

Geely New Vision has a total of 5 models on sale. Among them, the 2020 1.5L-CVT Premium model, Asian Games Edition, and Value Edition, equipped with a 109 horsepower engine, have an NEDC fuel consumption of 6.1L per 100 km. The Vision 2020 1.5L manual Asian Games Edition and manual Value Edition, also equipped with a 109 horsepower engine, have an NEDC fuel consumption of 5.8L per 100 km. The fuel tank capacity of all Geely New Vision models is 50L. The distance that can be covered with a full tank of fuel is as follows: For models equipped with a 109 horsepower engine, the distance that can be covered with a full tank of fuel is 50/6.1*100=820 km. For models equipped with a 109 horsepower engine, the distance that can be covered with a full tank of fuel is 50/5.8*100=862 km. The fuel consumption of a car is directly related to five major factors: driving habits, the car itself, road conditions, natural wind, and environmental temperature. Specific factors that can increase fuel consumption are as follows: Driving habits: Aggressive driving, such as sudden acceleration, frequent overtaking, and not releasing the throttle in advance when approaching a red light, can increase fuel consumption. The car itself: Cars with larger engine displacement generally consume more fuel than those with smaller displacement because larger displacement usually means greater power, requiring more gasoline to burn and perform work. Heavier cars also consume more fuel because greater weight requires more driving torque. Road conditions: Driving on dirt roads, muddy roads, soft surfaces, or mountainous roads increases resistance and fuel consumption. Natural wind: Driving against the wind or on windy days increases car resistance and fuel consumption. Low environmental temperature: When the engine block temperature is low, the gasoline injected during a cold start does not atomize easily, requiring more gasoline to be injected for combustion, thus increasing fuel consumption. Additionally, at low temperatures, the engine computer controls the car to use higher RPMs to warm up, which also increases fuel consumption.

20

0

Share

What are the warm reminders for safe driving slogans?

Warm reminders for traffic safety slogans: 1. Traffic safety concerns every household, and illegal driving poses great harm. Drive carefully in compliance with regulations, as family warmth depends on it. 2. Keep safety in mind, travel peacefully on the road, and happiness resides at home. 3. You go, I go, everyone goes, with safety awareness in mind; you yield, I yield, everyone yields, ensuring safe travel. 4. Take caution on the road and bring warmth back home. 5. Every little bit counts, safety comes first. Below is an introduction about safe driving distance: 1. Safe distance: There is no absolute numerical concept for safe distance, as it depends on specific circumstances. The faster the speed and the heavier the vehicle, the longer the required safe distance. Safe distance is also affected by many factors. Generally, when the speed is above 100km/h, the safe distance should be more than 100 meters. 2. Standard: There is no absolute standard for safe distance, only dynamic standards. The most direct and important factor affecting safe distance is speed. When the speed increases, the required braking force, braking distance, and the distance traveled at the original speed during the reaction time will all increase accordingly.

17

1

Share

What is a Shock Absorber?

Shock absorbers are designed to accelerate the attenuation of vibrations in the vehicle frame and body, thereby improving the ride smoothness (comfort) of the car. Most vehicle suspension systems are equipped with shock absorption devices. Below are specific details about shock absorbers: 1. Composition: A vehicle's shock absorption system consists of both springs and shock absorbers. The shock absorber is not used to support the weight of the vehicle body but to suppress the oscillations when the spring rebounds after absorbing shocks and to absorb the energy from road impacts. The spring serves to cushion the impact, transforming "a single large-energy impact" into "multiple small-energy impacts," while the shock absorber gradually reduces these "multiple small-energy impacts." 2. Principle: In the suspension system, elastic components generate vibrations when impacted. To enhance ride smoothness, shock absorbers are installed in parallel with the elastic components in the suspension. For vibration attenuation, most vehicle suspension systems use hydraulic shock absorbers. Their working principle involves the piston inside the shock absorber moving up and down when relative motion occurs between the frame (or body) and the axle due to vibrations. The oil in the shock absorber chamber repeatedly flows from one chamber to another through various orifices. The friction between the orifice walls and the oil, as well as the internal friction among oil molecules, creates a damping force that converts the vehicle's vibration energy into heat energy of the oil, which is then absorbed and dissipated into the atmosphere by the shock absorber.

8

5

Share

What is the fuel consumption of the Buick Regal 1.6t?

The Buick Regal 1.6t has three models, including the 2015 1.6T Elite Tech, Fashion Tech, and Leading Tech versions, all equipped with a 184-horsepower engine. The NEDC fuel consumption is 8.2L per 100km, which is the official data. The fuel tank capacity of the Buick Regal 1.6t is 70L. With a full tank, it can travel approximately 70/8.2*100=853km. On national highways and spacious suburban roads, the Buick Regal consumes about 8 liters per 100km. In mountainous areas, provincial roads, and typical suburban areas, it consumes about 8.6 liters per 100km, while in urban roads, it consumes about 9.3 liters per 100km. Specific factors that can increase fuel consumption are as follows: Driving habits: Aggressive driving, such as sudden acceleration, frequent overtaking, and not easing off the throttle before stopping at a red light, can increase fuel consumption. Vehicle itself: Cars with larger engine displacements generally consume more fuel than those with smaller displacements because larger engines typically produce more power and require more gasoline to burn and perform work. Heavier vehicles also consume more fuel due to the greater driving torque needed. Road conditions: Driving on dirt roads, muddy roads, soft surfaces, or mountainous roads increases resistance and fuel consumption. Natural wind: Driving against the wind or on windy days increases resistance and fuel consumption. Low ambient temperatures: When the engine block is cold, the injected gasoline does not atomize easily, requiring more gasoline for combustion, thus increasing fuel consumption. Additionally, the engine control unit may increase the idle speed to warm up the engine, further increasing fuel consumption. Engine carbon deposits: Over time, carbon deposits and sludge can form during gasoline combustion. If not cleaned promptly, they can lead to increased fuel consumption. Spark plug failure: Spark plugs generate high-voltage sparks to ignite the air-fuel mixture. If damaged, the ignition energy decreases, leading to uneven combustion, slower acceleration, and increased fuel consumption. Abnormal tire pressure: Incorrect tire pressure can affect fuel consumption. Low tire pressure or severe tread wear increases the contact area between the tire and the road, increasing friction and rolling resistance, which naturally raises fuel consumption. Carrying heavy loads: Overloading increases the vehicle's weight and driving pressure, leading to higher fuel consumption. Poor fuel injector atomization: Clogged fuel injectors can significantly reduce atomization efficiency, increasing fuel consumption. Faulty car sensors: Malfunctioning sensors, such as the coolant temperature sensor, can cause the engine to misinterpret the car as being in a cold state, continuously signaling for more fuel injection, thus increasing fuel consumption.

6

5

Share

What does the wrench symbol mean when starting a Volkswagen Polo?

Why can't front fog lights and rear fog lights be turned on simultaneously?

At what mileage should the timing belt of a car generally be replaced?

What is the fuel consumption of the Geely New Vision?

What are the warm reminders for safe driving slogans?

What is a Shock Absorber?

What is the fuel consumption of the Buick Regal 1.6t?

What is the average fuel consumption of the Kia K5?

What to Do When the Seat Belt Alarm Keeps Beeping?

Should the front windshield film be green or blue?

Internal or External Tire Pressure Monitoring: Which is Better?