What does the white rectangular marking box mean?

2 Answers
LaJayce
07/29/25 3:28am
Yield line, set 5~30 meters away from the stop line at intersections of non-main roads, means to slow down at the intersection and give priority to vehicles on the main road. Yield indicates that the vehicle should slow down and yield, informing the driver that they must slow down or stop, observe the traffic conditions on the main road, and only proceed when it is safe to do so, ensuring priority for vehicles on the main road. More related information is as follows: 1. Note: At intersections marked with yield lines, vehicles must stop and yield to vehicles on the main road. This line should be used in conjunction with the "Yield" sign. The yield line consists of two parallel dashed lines and an inverted triangle, all in white. 2. Speed reduction markings: Speed reduction markings usually appear at exit ramps, toll plaza areas, or other sections where vehicles need to slow down. They can be divided into transverse speed reduction markings and longitudinal speed reduction markings, with forms including single dashed lines, double dashed lines, and triple dashed lines, set perpendicular to the direction of travel.
Was this review help?
17
2
Share
DiAbigail
08/12/25 7:18am
As a seasoned driver who's been behind the wheel for years, let me break down the meaning of these white rectangular markings. Simply put, it's a white rectangular outline painted on roads or parking lots, specifically designating a parking space. After driving for so long, I've seen them everywhere: roadside, mall entrances, or residential areas – they mark dedicated vehicle parking zones where all four wheels must be properly aligned. Parking haphazardly risks tickets or traffic obstruction, so compliance is best. I've also noticed regional variations – some display time restrictions like free nighttime parking with daytime limits, while others include directional arrows. Ultimately, these markings are intelligently designed to help drivers easily locate safe parking while reducing road chaos. Frequent drivers should pay attention to such details, cultivating precise parking habits to avoid fines and accidents.
Was this review help?
12
5
Share
Expand All
More Forum Discussions

Where is the Roewe 550's cabin air filter located?

The cabin air filter of the Roewe 550 is located under the front windshield, directly opposite the passenger seat. The functions of the cabin air filter are: 1. Ensuring clean air in the cabin without breeding bacteria; 2. Separating solid impurities such as dust, pollen, and grinding particles from the air; 3. Ensuring the filter fits tightly against the housing to prevent unfiltered air from entering the cabin. The Roewe 550 is a compact car launched by SAIC Motor. Taking the Roewe 550 2014 Manual Smart Selection Edition as an example, its body dimensions are: length 4648 mm, width 1827 mm, height 1483 mm, with a wheelbase of 2705 mm, a fuel tank capacity of 62 liters, and a curb weight of 1485 kg.
14
1
Share

What does the green light of istop mean?

istop green light indicates that the auto start-stop is in the active state, meaning the auto start-stop system can function normally at this time. Below is more information about the auto start-stop system: 1. The use of the auto start-stop system is subject to certain conditions, such as insufficient battery power, too high or too low temperature, wheels in a turning state when stopping, too steep a slope, seatbelt not fastened, etc. 2. The auto start-stop system (Start/Stop) automatically turns off the engine when the vehicle comes to a temporary stop during driving and automatically restarts the engine when it's time to move forward again.
14
1
Share

What Causes a Car to Pull to One Side?

Automobile direction deviation may be caused by the following reasons: 1. Insufficient tire pressure is one of the main causes of car direction deviation. Unequal tire pressure, mainly caused by inconsistent tire pressure in the drive wheels, can lead to different degrees of wear between the drive wheels and the ground if the left and right tire pressures are unequal. Different friction levels can directly cause the car to pull to one side. 2. Abnormalities in the car's steering system. Issues within the car's steering system can also result in direction deviation. 3. The use of tires with different tread patterns on the two sides or uneven wear on the tires. This situation can cause different friction levels between the tires and the ground, leading to braking deviation. Additional Information: 1. If direction deviation is noticed while driving, it is advisable to stop and inspect the vehicle immediately if conditions permit. 2. If stopping immediately is not possible, find a safe place to stop as soon as possible.
6
2
Share

Can You Start the Engine in P Gear?

P Gear allows direct engine starting. The correct practice is indeed to start the engine in P Gear. Moreover, many vehicle models are designed at the factory to only allow engine starting when in P Gear, preventing ignition in other gears. Manufacturers implement this design for safety considerations. Relevant details are as follows: 1. Firstly, both P Gear and N Gear serve to disconnect the engine from the wheel transmission system. However, when in P Gear, a mechanical lever locks the output shaft, preventing vehicle movement to avoid rolling. 2. To put it simply: P Gear is essentially N Gear, but with the engine off, a vehicle in N Gear can be pushed freely, whereas a vehicle in P Gear cannot be moved.
19
5
Share

What parts are generally maintained during car maintenance?

The most important aspects of car maintenance are changing the engine oil and oil filter. The most frequent task in car maintenance is washing the car. The parts that need to be checked most often are the tire surface and pressure, oil level, coolant level, and brake fluid level. The five key points of engine maintenance are as follows: 1. Use the appropriate grade of engine oil and change the oil and filter regularly (every 5,000 kilometers); 2. Frequently maintain the air filter and replace it regularly (every 20,000 kilometers); 3. Clean the fuel system regularly and replace the fuel filter (every 30,000 kilometers); 4. Maintain the radiator mesh regularly (every 30,000 kilometers); 5. Replace the spark plugs regularly (every 40,000 kilometers or based on driving conditions).
4
5
Share

Where is the OBD port of Peugeot 308 located?

308OBD interface is located in the small compartment under the ashtray in front of the front gear lever. Remove the black plastic panel below to see the interface. For the new model, the interface is located inside the decorative panel below the left side of the steering wheel. Pull the decorative panel outward with force to see the interface. The following is an introduction to OBD: 1. The OBD on the car dashboard is an interface that allows maintenance personnel to read driving information and vehicle fault information fed back by the engine and other controllers. 2. The OBD on the car dashboard can store vehicle fault information. When we repair the vehicle and the fault light comes on, maintenance personnel will plug the data transmission line into the OBD interface to quickly determine the fault and carry out repairs. 3. The OBD on the car dashboard also records vehicle driving information, such as engine working condition, oil temperature, water temperature, etc., so that the vehicle's condition can be understood at any time, thereby ensuring better safety for the vehicle.
12
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.