What does the white 80 road marking mean?

1 Answers
MacIsabela
07/30/25 4:17am
Ground markings with the number 80 in white indicate a minimum speed limit of 80 km/h. Ground markings with the number 80 in yellow indicate a maximum speed limit of 80 km/h. White numbers on the ground represent minimum speed limits, while yellow numbers represent maximum speed limits. Below are specific details about minimum speed limit signs: 1. Meaning: Road traffic signs are facilities that use graphic symbols, colors, and text to convey specific information for traffic management. They play a role in ensuring smooth traffic flow and driving safety, so drivers and all road users must comply with them. Traffic safety slogans can enhance drivers' and road users' awareness of voluntarily following traffic regulations, which is significant for building a safe and smooth traffic environment. 2. Current situation: In China, speed limit signs are primarily set up by dividing road sections. For general road sections with good alignment, speed limits are determined based on operating speeds. Other sections are set up according to traffic conditions or based on road traffic accident situations.
Was this review help?
13
0
Share
More Forum Discussions

How to Deal with Dents Caused by Hail on a Car?

Hail damage to a car is best repaired through paintless dent repair (PDR). PDR has the following characteristics: it does not require traditional "bodywork, putty, or painting," thus preserving the original car paint; the repair time is short, and the cost is very low. The repair effect is excellent, fully protecting the original car. Hail damage falls under the coverage of the comprehensive insurance policy provided by insurance companies. If you find your car damaged by hail, you can call their hotline to report the incident and file a claim with the insurance company. Methods for claiming insurance for hail damage to a car: 1. Report the incident to the insurance company. If all the required documents are complete, you can report the incident to the insurance company, which must be done within 24 hours. When reporting, you need to provide detailed information, such as the vehicle's parking location, the person responsible for parking, and the weather conditions. 2. After reporting, undergo inspection and damage assessment. After reporting, the insurance company will arrange for a staff member to contact you and conduct an inspection nearby. During the inspection, the staff will take photos of the vehicle's damage. 3. Required documents. During the inspection process, you need to provide the staff with the owner's ID card, the vehicle registration certificate, the original and copy of the driver's license, and the owner's bank card. Please ensure all these documents are valid.
7
0
Share

How to Read Tire Specifications?

For example, if the tire specification is 195/65R15-91V, the 195 indicates that the tire width is 195mm; 65 represents the aspect ratio, which is the percentage of the tire's section height to its width (65%); "R" stands for RADIAL, indicating it is a radial tire; 15 denotes the rim diameter in inches (15 inches); 91 is the load index; and V signifies the tire's speed rating. Here is an introduction to the meanings of tire specifications: 1. Tire type code: Common representations include "X" for high-pressure tires, "R" and "Z" for radial tires, and "-" for low-pressure tires. Passenger cars on the market generally use radial tires, which are now mostly tubeless, commonly known as "tubeless tires." These tires are less prone to heat buildup during high-speed driving. If punctured by a nail or sharp object, they lose air slowly, allowing the vehicle to continue driving for a short distance. 2. Tire width: This is a factor that affects the vehicle's fuel consumption. Wider tires have a larger contact area with the ground, increasing friction between the tire and the road. As a result, more energy is lost as friction heat when converting the vehicle's kinetic energy, meaning wider tires tend to consume more fuel over the same distance. 3. Aspect ratio: This is a major factor influencing the vehicle's responsiveness to the road. Vehicles with lower aspect ratios have thinner sidewalls and can withstand greater pressure, making them highly responsive to road conditions. This allows for quicker transmission of road signals to the driver, enhancing control—common in performance-oriented models. Higher aspect ratios result in thicker sidewalls. 4. Load index: This represents the maximum load a tire can bear in coded form, indicating its load-bearing capacity. A higher numerical value means the tire can handle a greater load.
1
2
Share

What is the Opirus model?

The Opirus is a mid-to-large luxury sedan under the Kia brand. The Opirus is an imported vehicle, so it is not very common in the domestic market. Below are the specific details about the Opirus: 1. The Opirus is equipped with three engines: a 2.7L naturally aspirated engine, a 3.5L naturally aspirated engine, and a 3.8L naturally aspirated engine. 2. The 2.7L naturally aspirated engine is a V6 engine with a maximum power of 141 kW, a maximum torque of 250 Nm, a maximum power speed of 6000 rpm, and a maximum torque speed of 4000 rpm. This engine features multi-point fuel injection technology and uses an aluminum alloy cylinder head and block. It is paired with a 5-speed automatic transmission. 3. The 3.5L naturally aspirated engine is also a V6 engine, delivering a maximum power of 203 kW, a maximum torque of 304 Nm, a maximum power speed of 5500 rpm, and a maximum torque speed of 3500 rpm. This engine also employs multi-point fuel injection technology and an aluminum alloy cylinder head and block, matched with a 5-speed automatic transmission. 4. The 3.8L naturally aspirated engine produces a maximum power of 196 kW, a maximum torque of 353 Nm, a maximum power speed of 6000 rpm, and a maximum torque speed of 4500 rpm. Like the other engines, it features multi-point fuel injection and an aluminum alloy cylinder head and block, paired with a 5-speed automatic transmission.
8
5
Share

What is the 0-100 km/h acceleration time of the Haval H6?

According to official data, the Haval H6 comes with two engine options: 1.5T and 2.0T. The 1.5T version has a 0-100 km/h acceleration time of 11.2 seconds, while the 2.0T version achieves it in 7.6 seconds. The factors affecting a vehicle's 0-100 km/h acceleration time are as follows: Torque: Torque, in simple terms, represents how much force is available. The greater the torque, the stronger the force pushing the vehicle, resulting in faster acceleration. The Haval H6 1.5T version has a maximum torque of 285 Nm with a 0-100 km/h acceleration time of 11.2 seconds, while the 2.0T version has a maximum torque of 385 Nm with a 0-100 km/h acceleration time of 7.6 seconds. Transmission efficiency: The transmission is the medium for power delivery and inevitably involves power loss. The higher the transmission efficiency, the better the acceleration performance. Generally, transmission efficiency ranks as follows: manual transmission > dry dual-clutch transmission (DCT) > wet dual-clutch transmission (DCT) > AT transmission > CVT transmission. Both the Haval H6 1.5T and 2.0T versions are equipped with a 7-speed wet dual-clutch transmission (DCT). Power-to-weight ratio:
15
2
Share

What Causes Abnormal Noise When Braking a Car?

Here is a detailed introduction to the causes of abnormal noise when braking a car: 1. Break-in noise between brake pads and rotors: Brake pads consist of steel plates, bonded insulation layers, and friction blocks. Newly replaced brake pads may not properly integrate with worn rotors due to differing wear levels, resulting in braking noise. 2. Severe wear of brake rotors and pads: When brake pads wear to their limit, the warning shim contacts the rotor, producing abnormal sounds. Brake pads should be replaced promptly. 3. Brake caliper noise: If brake calipers aren't cleaned regularly, accumulated debris can cause noise.
16
3
Share

What is the method for unclogging the rear sunroof drain pipe?

Here are the methods for unclogging the rear sunroof drain pipe: 1. Syringe injection method: Use a syringe connected to an infusion tube to first extract the accumulated water in the drainage channel to prevent backflow during forceful injection. After extracting the water, fill the syringe with clean water, point the outlet of the infusion tube towards the entrance of the drain pipe, and control the force based on the resistance encountered during injection. Once water overflows, use a suction method to extract the mixture of dirty water. Repeat this process several times to unclog the drain pipe. 2. Air gun inflation method: Use high-pressure airflow to pressure-clean the drain pipe. When unclogging, wrap the nozzle with a piece of cloth to prevent splashing dirty water from staining clothes and the vehicle. Avoid setting the air pressure too high, as it may cause the rubber connector and drain pipe to detach, leading to more severe leakage issues. After blowing, pour clean water into the entrance of the drain pipe to check if water flows out from the outlet near the tire mudguard. If water flows out, it indicates successful unclogging.
7
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.