What does the water tap symbol on a car mean?

1 Answers
LandonFitz
07/29/25 7:07pm
This icon is the engine malfunction indicator light. If the engine malfunction indicator light comes on while driving, it may indicate that the engine is in a poor combustion state, experiencing engine knocking, poor fuel quality, dirty engine cylinders with carbon deposits, or unavailable computer data, among other issues. It is essential to address the engine malfunction light promptly. If not resolved in time, it is usually accompanied by the following problems: 1. Deterioration in the quality of vehicle exhaust emissions, leading to environmental pollution. 2. Increased fuel consumption. 3. Elevated combustion chamber temperature and accelerated wear. 4. Engine oil burning. 5. Increased engine noise, affecting ride comfort.
Was this review help?
12
2
Share
More Forum Discussions

How to Remove Cement Stains from a Car?

Methods for removing cement stains from a car are as follows: 1. Deal with it promptly before it hardens: Wet and rinse with clean water, then use a towel with cleaning solution to wash. 2. Use an acidic solution for cleaning, such as white vinegar. Pour white vinegar onto the cement, wait a few minutes for the cement to soften, and then wash repeatedly. Avoid scraping or rubbing randomly to prevent damage to the car paint. 3. Purchase a cement cleaner for washing: Pour the cement cleaner onto the cement, wait a few minutes for the cement to soften, and then wash repeatedly. 4. Small areas of cement can be cleaned by yourself, but for large areas, it is recommended to go to a professional car wash.
4
2
Share

What Causes the Battery Light to Occasionally Illuminate While Driving?

The battery light occasionally illuminating while driving is mainly due to reasons such as a loose belt or tensioner pulley, worn generator carbon brushes, faulty generator voltage regulator, loose battery terminals, or faulty battery sensor. Loose Belt or Tensioner Pulley: The generator is driven by a belt and pulley on the engine, and the tensioner pulley's role is to keep the belt tight to prevent slipping. Over time, the belt may stretch, and the tensioner's tension may decrease, causing the belt to slip, especially during acceleration. A slipping belt may fail to drive the generator, causing it to stop working temporarily. In this case, the belt needs to be reinforced and tightened. Worn Generator Carbon Brushes: The generator's carbon brushes, which constantly rub against the rotor, can wear out over time, leading to abnormal generator operation and failure to charge the battery. Solution: Replace the generator carbon brushes. Faulty Generator Voltage Regulator: The voltage regulator is integrated with the generator and functions to convert the AC current generated by the generator into DC current. Additionally, as engine conditions vary, the speed fluctuates, causing the AC voltage from the generator to fluctuate. The regulator stabilizes this voltage. Solution: Replace the voltage regulator. Loose Battery Terminals: If the battery terminals are not tightened properly, the vibrations during driving may cause poor contact, preventing the battery from charging. Solution: Tighten the battery terminals. Faulty Battery Sensor: The battery sensor detects the generator's charging voltage and works with the regulator to ensure stable voltage is delivered to the battery. Solution: Replace the battery sensor. Battery Maintenance Methods: Keep the battery clean and dry, and ensure the vent holes are unobstructed. If oxides appear on the plates or terminals, clean them and apply a small amount of grease to prevent corrosion. Avoid continuous use of the starter motor. Each use should not exceed 5 seconds, with a 10-15 second break between two starts. In severe winter, the battery discharge level should not exceed 25%, and in summer, it should not exceed 50%. A battery filled with electrolyte should not be left in a state of insufficient charge for long periods. Charge it regularly to avoid permanent damage.
16
5
Share

Why can't the car key start the engine?

Reasons and solutions for the car key failing to start the engine are as follows: 1. Insufficient fuel, the car lacks a power source. Solution: Refuel. 2. Incorrect gear position: The gear is in R or another position. Solution: Generally, shifting to P or N gear will solve the issue. 3. Circuit or electronic failure. Solution: Contact a professional for repair as soon as possible. 4. Fuel system failure: Fuel pump malfunction, blocked fuel line, clogged fuel filter, spark plug carbon buildup, or damaged fuel injector. Solution: Contact a professional for repair as soon as possible.
5
2
Share

How to Maintain a New Car Battery?

The maintenance methods for a new car battery are as follows: 1. The car should not be left idle for long periods. A car that is not used for an extended time will gradually lose battery charge, which may lead to difficulty starting the car when needed. If the car is used infrequently, it is advisable to drive it periodically to keep the battery fully charged. 2. Avoid using electrical devices after turning off the engine. For example, listening to music while the engine is off consumes the battery's power. Prolonged use can drain the battery completely, resulting in failure to start the car. It is recommended that owners refrain from using electrical devices after turning off the engine. 3. Clean and maintain the battery. Regularly clean the car battery by wiping the positive and negative terminals with a dry cloth to remove dust, grease, white powder, and other contaminants that may cause leakage. Avoid using a wet cloth to prevent electric shock. If owners find it difficult to perform these tasks, it is recommended to visit a 4S store or a professional repair facility for assistance.
12
1
Share

Can a car pass the annual inspection after installing fog lights?

Installing fog lights on a vehicle does not affect the annual inspection, and it can pass. The prerequisite is that the vehicle has applied for record filing at the local vehicle management office before the modification, and the fog lights are installed by professional modifiers, with the color of the added fog lights consistent with that of standard fog lights. The external structure, brightness, and angle of illumination of the added fog lights must match those of standard vehicle fog lights. If the color of the fog lights installed by the owner does not comply with regulations, the appearance differs from standard vehicle fog lights, or the angle of illumination is too high, the vehicle will not pass the annual inspection due to these issues. Fog lights are installed at the front and rear of the car, divided into front fog lights and rear fog lights. Front fog lights are white or yellow, while rear fog lights are red. Since light can increase visibility distance, especially yellow anti-fog lights, which have strong light penetration, they can improve the visibility of the driver and surrounding traffic participants in low-visibility foggy conditions where the driver's line of sight is limited. This allows oncoming vehicles and pedestrians to spot each other from a greater distance. Therefore, installing fog lights on low-end cars is legal and beneficial for safety. As fog lights are considered safety devices, the Ministry of Public Security requires motor vehicles to install fog lights that comply with national standards. Motor vehicles without rear fog lights installed as required are not allowed to enter highways. When installing vehicle fog lights, wiring needs to be rerouted at the vehicle's battery. Therefore, it is necessary to have professionals install the fog lights to prevent improper wiring from affecting the normal use of other vehicle circuits.
8
1
Share

What is a Wagon Car?

A wagon car is essentially the Chinese term for the English word 'wagon,' referring to a station wagon. Most station wagons are based on sedans, with the trunk raised to the level of the roof to increase luggage space. The charm of a wagon lies in its combination of sedan-like comfort, substantial luggage space, and a very stable and mature appearance. Here are introductions to three popular wagon models: Volkswagen Passat Variant: Externally, the Passat Variant continues to adopt the family-style design. The three-bar grille combined with LED headlights gives a very clean feel and enhances its three-dimensionality. The body dimensions are 4773/1832/1505 mm, with a wheelbase of 2790 mm, positioning it as a mid-size car. The interior features a standard 9.2-inch embedded central control screen and a 10.2-inch full LCD instrument panel across all models. In terms of power, all models are equipped with a 2.0T engine, delivering a maximum power of 190 horsepower and a peak torque of 320 Nm. It is paired with a 7-speed wet dual-clutch transmission. Volkswagen CC Shooting Brake: The front face design looks very sporty, with the continuous LED daytime running lights connected to the central logo, enhancing its recognizability. The dimensions are 4869/1870/1459 mm, with a wheelbase of 2841 mm. The interior style is very distinctive, with horizontal segmented air vents and continuous chrome trim enhancing the sense of layering. Additionally, the 9.2-inch central control screen and 10.25-inch full LCD instrument panel are standard features in Volkswagen models. For the powertrain, all models are equipped with a 2.0T engine, available in high and low versions. The maximum power outputs are 220 horsepower and 186 horsepower, with peak torques of 350 Nm and 320 Nm, respectively. Both versions are paired with a 7-speed wet dual-clutch transmission. New Audi A4: Externally, the Audi A4 maintains its unique family-style design. The dual single-exit tailpipes and the central silver guard plate design enhance its sporty appeal. The dimensions are 4762/1847/1459 mm, with a wheelbase of 2822 mm. Inside, the overall changes are more intelligent, with a 10.1-inch floating central control screen and a 12.3-inch full LCD instrument panel giving it a strong technological feel. In terms of power, all models are equipped with a 2.0T engine, available in high and low versions. The maximum power outputs are 252 horsepower and 204 horsepower, with a peak torque of 370 Nm. Both versions are paired with a 7-speed dual-clutch transmission.
20
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.