···
Log in / Register

What does the water drop from a kettle on the car indicate?

5 Answers
LeGenevieve
07/29/25 6:27am

Car kettle dripping symbol meaning is the oil pressure warning light. Here is part of the introduction about the car kettle dripping symbol: Car dashboard: The kettle symbol displayed on the car dashboard is the oil pressure warning light. It is normal if this light is on when the car is just started. If it stays on while driving, it indicates an engine malfunction, and the car needs to be inspected and repaired. Water symbol: The kettle dripping symbol on the car is used to indicate whether the oil pressure is normal. It will light up if the oil pressure is abnormal. Check if there is any engine malfunction, and if necessary, take the car to a 4S shop for inspection. The reason for the oil pressure warning light staying on is that the engine oil level is too low.

Was this review help?
19
3
Share
DiHadley
08/12/25 9:58pm

That dripping kettle icon is a dashboard warning light indicating the coolant level is too low and requires immediate attention. Coolant regulates engine temperature - if it's too low, the engine can overheat and suffer severe damage like cylinder head warping or piston seizure. When this light comes on, promptly find a safe spot to stop and turn off the engine. After cooling, check the coolant reservoir level. If low, top up with distilled water or dedicated coolant. If there are leakage signs, visit a repair shop immediately. With over a decade of driving experience, I've seen this light twice - both times required careful handling to avoid costly repairs exceeding tens of thousands. Developing a habit of regular level checks prevents trouble, and using summer anti-boil/winter antifreeze coolant is crucial.

Was this review help?
10
5
Share
Expand All
DeMariana
10/04/25 3:17am

When the water droplet icon appears on the car, it indicates that the coolant level is too low and needs attention. Coolant acts like the heart's protective fluid for the car; without it, the engine can overheat, stop working, or even self-destruct. As a parent who frequently travels with kids, I'm particularly vigilant about such warnings, fearing a breakdown that could lead to danger. The solution is to stop the car, turn off the engine, wait for it to cool, then open the hood to check the coolant reservoir. If it's low, add some water or buy a bottle of coolant to top it up. If there's a leak, it must be repaired to prevent the problem from worsening. Remember to check it quarterly—maintenance is low-cost and ensures peace of mind. Safe driving is paramount.

Was this review help?
17
4
Share
Expand All
DiGabriella
11/17/25 4:53am

The water droplet light on the dashboard is basically a warning for insufficient coolant. It means the antifreeze level is too low and the engine may overheat. Park the car, turn off the engine, wait for it to cool down, then check the fluid level in the transparent reservoir. If it's low, add some distilled water or coolant bought from a supermarket as a temporary solution. If there's a leak, you must take it to a repair shop, otherwise it will damage the car. This issue is common but ignoring it can lead to serious consequences, such as expensive engine replacement. Simple maintenance like changing the fluid annually can extend the car's lifespan and save money.

Was this review help?
4
2
Share
Expand All
LeAmy
01/07/26 6:29am

The water drop warning light indicates a high risk of low coolant level. Ignoring it can lead to engine temperature spikes, triggering expensive repairs such as engine block cracks costing at least several thousand dollars. After parking, check the coolant reservoir—if empty, refill with distilled water or professional coolant. If there's a system leak, repairs are mandatory to prevent further costs. Regular maintenance, like scheduled fluid changes, spends small to prevent big disasters while reducing emissions for environmental protection. I emphasize economical and practical upkeep to extend vehicle service life safely and reliably.

Was this review help?
6
4
Share
Expand All
More Forum Discussions

Where to add water to the Chevrolet Malibu XL radiator?

Steps to add water to the Malibu XL radiator are as follows: 1. Turn the pressure cap counterclockwise. If a hissing sound is heard, wait until the sound disappears before opening; 2. Add an appropriate amount of coolant into the coolant expansion tank, ensuring the level is between the MAX and MIN marks on the tank; 3. Start the engine with the coolant expansion tank cap open; 4. After starting the engine, the coolant level in the tank will gradually decrease. At this point, add an appropriate amount of coolant to the expansion tank until the level reaches between the MAX and MIN marks on the coolant expansion tank; 5. Reinstall the cap, ensuring the pressure cap is hand-tightened and fully seated.
18
4
Share

What Causes Abnormal Noise in Car Air Conditioners?

Reasons for abnormal noise in car air conditioners: 1. Lack of lubricating refrigerant oil inside the compressor, causing metal friction sounds when the compressor's electromagnetic clutch engages. 2. Abnormal noise due to excessive tension on the air conditioning belt. 3. Faulty electromagnetic clutch, with damaged internal bearings producing abnormal noise. The following is an introduction to the car air conditioning system: The car air conditioning system is a device that cools, heats, ventilates, and purifies the air inside the vehicle. It includes cooling devices, heating devices, and ventilation devices. This combined system makes full use of the limited space inside the car, with a simple structure that is easy to operate. The air conditioning system can provide a comfortable environment for passengers and reduce driver fatigue.
12
2
Share

Will there be any problems if the Verano's chassis is hit while driving?

Hitting the chassis while driving the Verano can cause problems. Below are the main impacts of chassis scraping during driving: 1. Fuel tank - Impact can deform the fuel tank. 2. Wiring - Some wiring is located on the chassis, which may lead to wiring failures. 3. Exhaust pipe - Frequent impacts can damage the exhaust pipe. 4. Engine oil pan - Wear can affect engine performance. Here is additional information: 1. The chassis typically refers to the automobile chassis, which is the main framework of the vehicle's underside. All power components of the vehicle, including the engine, transmission, differential, and suspension system, are installed on the chassis. 2. The chassis serves to support and install the car engine and its various components and assemblies, forming the overall shape of the vehicle. It receives the engine's power to enable movement and ensure normal driving. Additionally, a good chassis can safeguard the driver's life.
8
1
Share

How to turn on the rear wiper of Honda CR-V

Here are the methods to turn on the rear wiper of Honda CR-V: 1. Push the wiper lever backward (press down to the first gear) to activate the rear window wiper. 2. Lift the wiper lever upward to activate the front wiper spray, and pull the wiper lever downward to activate the rear wiper spray (for cleaning the glass water). More information about Honda CR-V is as follows: 1. Honda CR-V is a compact SUV with a 1.5T L4 engine and turbocharged intake. 2. The dimensions of this car are 4621mm in length, 1855mm in width, and 1679mm in height, with a wheelbase of 2661mm. The body type is a 5-door, 5-seat SUV, equipped with a 6-speed manual transmission and front-wheel drive.
9
1
Share

Why Can't the Car Key Be Turned?

Reasons why the car key can't be turned: The car key may not turn because the steering wheel has automatically locked. This is part of the car's automatic anti-theft system. When the vehicle is turned off, the steering lock pin engages with the steering column, preventing the steering wheel from moving. Even if the key is inserted, it cannot be turned. This is a safety feature designed to protect the vehicle. Here are some solutions: If the car key cannot be turned, you can unlock the steering wheel by inserting the mechanical key, pressing the brake pedal, and then gently turning the steering wheel. Although the steering wheel is locked, it can still be moved slightly. While turning the steering wheel, turn the key at the same time to complete the steering wheel unlocking process. At this point, the vehicle can be started normally.
16
5
Share

How to Replace Brake Pads on a Mercedes-Benz C200?

Mercedes-Benz C200 brake pad replacement steps are as follows: 1. Remove the tire. 2. Loosen the caliper fixing screws and remove the caliper. 3. Release the brake pad clips and take out the brake pads. 4. Use large pliers or a specialized piston pushing tool to push the caliper piston back. 5. Install the new brake pads. 6. Secure the clips and reassemble following the original steps. Additional relevant information is as follows: 1. Brake pads, also known as brake linings, are the most critical safety components in a car's braking system. The effectiveness of all braking is decisively influenced by the brake pads, making high-quality brake pads the protector of both the driver and the vehicle. 2. Brake pads generally consist of a steel plate, an adhesive heat insulation layer, and a friction block. The steel plate is coated to prevent rust, and the coating process is monitored using an SMT-4 oven temperature tracker to ensure the temperature distribution during coating meets quality standards.
15
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.