What Does the Warranty of V-KOOL Cover?

1 Answers
DeJosiah
07/29/25 12:22pm
V-KOOL's warranty covers issues such as delamination, bubbling, creases, and color fading. Additionally, if there are more than ten dirt spots per square centimeter, it is also covered under the warranty. V-KOOL Brand Story: In the 1970s, to alleviate the global oil crisis, engineers at the Massachusetts Institute of Technology developed a revolutionary technology to solve the conflict between light and heat, marking the beginning of the V-KOOL story. With the dedication of a group of visionary, passionate, and exceptionally talented scientists, the first V-KOOL product, VK70, was officially launched in 1993, originating from Silicon Valley technology. This product dramatically transformed the industry landscape and remains unparalleled to this day. V-KOOL Brand Introduction: Eastman Chemical Company is a globally leading specialty chemicals company and a top manufacturer of window films. Its products are widely used in various fields of daily life. Headquartered in Kingsport, Tennessee, USA, it is a publicly traded company on the New York Stock Exchange and ranks among the Fortune 500. With approximately 13,500 employees and 42 manufacturing bases worldwide, its business spans nearly 100 countries. Committed to environmental protection, social responsibility, and economic development, it was awarded the ENERGY STAR Partner of the Year by the U.S. Environmental Protection Agency in 2012.
Was this review help?
13
3
Share
More Forum Discussions

Which country does the Ford Mustang brand belong to?

The Mustang is an automobile produced by Ford Motor Company of the United States. In the late 1980s, during the wave of reform and opening up, the Mustang was born as one of China's earliest automobile manufacturers. This vehicle utilizes two types of engines: a 2.3-liter turbocharged engine and a 5.0-liter V8 naturally aspirated engine. Below are the introductions for these two engines: 1. Mustang 2.3T Turbocharged Engine: This engine has a maximum power output of 220 kW, a maximum torque of 434 Nm, reaches its maximum power at 5,400 rpm, and achieves peak torque at 3,000 rpm. It features direct fuel injection technology and uses an aluminum alloy cylinder head and block. The engine is paired with a 10-speed automatic transmission (10AT). 2. Mustang 5.0L V8 Naturally Aspirated Engine: This engine delivers a maximum power of 343 kW, a maximum torque of 555 Nm, reaches its maximum power at 7,000 rpm, and achieves peak torque at 4,600 rpm. It employs multi-point electronic fuel injection technology and utilizes an aluminum alloy cylinder head and block. The engine is matched with a 10-speed automatic transmission (10AT).
10
2
Share

Which is faster for charging new energy vehicles, DC or AC?

Among them, AC charging has a smaller power and requires a longer charging time, but it causes less damage to the battery. On the contrary, DC charging piles have a higher charging power, faster charging speed, but also greater battery damage. The specific precautions for electric vehicle charging are as follows: Master the correct charging time: Pure electric vehicles take longer to replenish energy. If you choose a home charging pile, it takes nearly 8 hours to fully charge, while a fast charging pile takes about 40 minutes to charge up to 80%. Develop the habit of frequent charging and do not wait until the battery is too low before charging. Avoid overcharging and over-discharging the battery: Both overcharging and over-discharging will reduce the battery's lifespan. Any product that uses a battery should not be "over-discharged," and pure electric vehicles are no exception. Although battery packs are designed with protection systems, frequently driving the vehicle until the "red light" comes on will definitely affect the battery pack's lifespan. Additionally, charging should be stopped immediately once the battery is fully charged, similar to charging a mobile phone.
13
5
Share

What causes the AC indicator light to flash in a Mitsubishi Pajero when the AC is turned on?

AC compressor clutch not engaging. Fault description: The engine ECU has received the air conditioning request signal from the AC ECU (since the AC fan operates when the AC is turned on). Referring to the circuit diagram, measurements show that when the AC is on, the engine ECU can control the grounding of the fan relay, but there is no control signal output for the AC compressor relay. Further testing of the wiring shows no grounding short circuits or open circuits; the wiring is normal. Additional relevant information is as follows: Notes: To further pinpoint the fault, use a diagnostic tool to read the data stream in the engine system. When the AC is turned on after starting the engine, the air conditioning request signal in the data stream is ON, and the air conditioning relay control is ON. After turning off the AC, the air conditioning request signal in the data stream is OFF, and the air conditioning relay control is OFF, indicating that the engine ECU has received the signal from the AC ECU. At this point, the fault point is clear—an issue with the air conditioning control panel. Check the low-pressure switch, high-pressure switch, transition to the air conditioning (blue section on the control panel), and possible issues with fuses and relays.
3
3
Share

Does the driver's license time count from registration or from the subject one test?

The count starts from the day of the subject one test. Within three years, if any subject test result is unqualified, all other passed subject results will be invalidated, requiring re-registration and starting over. Below are the relevant details: 1. Laws and regulations: Article 38 of the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses" stipulates that applicants learning to drive on the field and road must obtain a learning driving certificate as required. The validity period of the learning driving certificate is three years, and applicants must complete the subject two and subject three tests within the validity period. If the tests are not completed within the validity period, the passed subject results will be invalidated. 2. Retake precautions: Each subject test can be taken once, and if the test result is unqualified, it can be retaken once. If the retake is not attended or still unqualified, the current test is terminated, and the applicant must reschedule the test, but the subject two and subject three tests should be scheduled after ten days.
19
4
Share

How many kilometers can a underbone motorcycle travel on a full tank of fuel?

A full tank of fuel for an underbone motorcycle can generally cover approximately 130 kilometers. Check with the oil dipstick or oil window as the standard. Checking the oil level height: When changing the oil, park the motorcycle on a flat surface using the main stand, remove the drain screw at the bottom right side of the engine to drain all the old oil, then reinstall the drain screw. Add about 800 milliliters of new oil, insert the dipstick into the dipstick hole (push it all the way in without screwing it in), then pull it out to check that the oil level is between the upper and lower marks at the end of the dipstick. Choosing a qualified oil can: During high-temperature seasons, even when using a fuel pump to fill a can with gasoline to refuel a motorcycle parked in a designated refueling area, it is important to use a can made of conductive materials like iron or aluminum. Plastic containers must not be used as oil cans, as they can easily cause static electricity reactions, leading to fires.
11
3
Share

Can You Still Drive with an Engine Control System Malfunction?

Continuing to drive with an engine control system malfunction can cause the vehicle's engine to stall, primarily due to insufficient power supply, making it unsafe to continue driving. The reasons for engine malfunctions are as follows: Engine Knock: When non-sensing knock exceeds the range that the engine computer can adjust, the engine malfunction light may illuminate and trigger an alarm. Of course, there are many factors that can influence engine knock. Air Flow Sensor Malfunction: The air flow meter converts the detected intake air into an electrical signal and transmits it to the engine computer. Based on the optimal air-fuel ratio, the electronic control unit indirectly determines the fuel quantity. Poor or Substandard Gasoline Quality: Poor gasoline quality not only affects incomplete combustion of the air-fuel mixture in the cylinder, leading to excessive carbon deposits, but also risks clogging the fuel system and corroding components. Additionally, it disrupts the normal mixture concentration and its final effect. When the engine malfunction light comes on, it is often accompanied by shaking and vibrations.
12
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.