What does the warning light with an exclamation mark inside a semicircle indicate?

1 Answers
AustinRose
07/29/25 4:24pm
A warning light displaying a semicircle with an exclamation mark inside is the tire pressure warning light. Below is an introduction on how to reset the tire pressure indicator on the new Magotan: 1. Methods to reset the tire pressure indicator: (1) Use the buttons on the multifunction steering wheel to access the 'Tire Pressure' option in the multifunction menu and store the tire pressure status. Users can refer to the manual for specific instructions. (2) There is a tire pressure reset switch on the side of the gear lever. With the ignition switch turned on, press and hold the reset button until you hear a beep, indicating the reset is complete. 2. The role of tire pressure monitoring: In car maintenance, the engine is the heart of the car, and its failure can lead to the end of the car's life. Similarly, tire pressure is like the car's blood pressure, and its level plays a crucial role in the car's performance and power. Tire pressure monitoring is divided into indirect and direct types. Identifying the type of tire pressure monitoring in your car helps in promptly addressing issues when the tire pressure warning light comes on.
Was this review help?
13
2
Share
More Forum Discussions

How to Unlock a Stuck P Gear?

p>The methods to unlock a stuck P gear include: 1. Release the brake and shift: Release the brake pedal, then press it again and try to shift gears; 2. Turn the steering wheel and shift: If that doesn't work, try turning the steering wheel slightly before shifting gears; 3. Restart the engine: You can restart the engine, press the brake again, and shift gears; 4. Disconnect the battery: Open the hood, disconnect the battery, then restart the engine, press the brake again, and shift gears. These methods can usually resolve a stuck P gear. If the P gear remains stuck and cannot be shifted, it is likely due to damage to the gear limit switch, brake light switch, or brake light fuse. In such cases, it is necessary to contact a 4S shop for repairs.
11
3
Share

Why does the reverse camera suddenly stop displaying?

The reasons why the reverse camera suddenly stops displaying are as follows: 1. The camera is damaged or blocked: If the camera is damaged, the image cannot be uploaded to the computer, and naturally, it won't display. In this case, you need to go to a repair shop or 4S store for maintenance, and if necessary, replace the camera. If it's just blocked by debris, simply remove it. 2. The display screen is damaged: When the display screen remains black and fails to start or shows distorted images, it is generally already damaged. This situation requires inspection and repair at a repair shop or 4S store. 3. Poor wire connection: If you frequently drive on rough roads, the bumpy environment may cause the internal wires of the vehicle to loosen or detach. When the wire connection is poor, the image from the camera cannot be transmitted to the main unit, and the reverse camera won't display. This situation requires disassembling the center console panel for inspection. 4. No power: When the car's lights or multimedia are used for a long time while the engine is off, the battery may run out of power. When the power is insufficient or depleted, the car's multimedia system will not function, and the reverse camera won't display. In this case, simply recharge or replace the battery.
4
5
Share

What is the autoh function?

autoh refers to the Auto Hold function. The application of Auto Hold technology allows drivers to avoid unnecessary vehicle sliding without the need for prolonged braking or activating the electronic parking brake. Below is an introduction to the Auto Hold function: 1. Prevents the vehicle from rolling backward when starting on a slope: Traditional parking brake devices require the driver to manually release the handbrake based on experience when starting on a slope. The AUTOH Auto Hold function, however, uses a slope sensor to provide precise parking force through the controller. During startup, the parking control unit calculates information from the clutch distance sensor, clutch engagement speed sensor, and throttle pedal sensor. When the driving force exceeds the running resistance, the parking brake is automatically released, enabling smooth vehicle startup. 2. Automatically activates four-wheel braking when waiting at a red light: To use it, simply press the "AUTOH" button lightly to activate the corresponding Auto Hold function. The intelligent AUTOH Auto Hold function automatically engages four-wheel braking when the vehicle is stopped at a red light or on a slope, keeping the vehicle stationary even in D or N gear without the need to continuously press the brake pedal or use the handbrake. To release the stationary state, simply lightly press the accelerator pedal to disengage the brake. This function is particularly practical for drivers frequently navigating stop-and-go city traffic and is also favored by those who often experience vehicle rollback.
5
4
Share

What does it mean when a car displays an oil can dripping?

When a car displays a red oil can dripping, it means the engine oil is insufficient and the oil pressure is low. The oil level has reached the lower limit, and it is necessary to add oil as soon as possible to avoid damage to the engine. Here are specific details about engine oil: 1. Function: Engine oil, also known as engine lubricant, serves to lubricate and reduce friction, assist in cooling, seal against leaks, prevent rust and corrosion, and provide shock absorption for the engine. It is often referred to as the "blood" of the car. The engine is the heart of the car, containing many metal surfaces that move against each other at high speeds in harsh environments, with working temperatures reaching 400°C to 600°C. Under such severe conditions, only qualified lubricating oil can reduce wear on engine parts and extend their service life. 2. Classification: Engine oil can be divided into three categories based on its source: conventional mineral oil, synthetic oil, and nano-ceramic oil. Synthetic oil has higher lubricity, lower friction resistance, better oxidation resistance, and stronger cleaning properties than mineral oil. Its disadvantages are slightly poorer low-temperature fluidity and heat resistance compared to mineral oil. Nano-ceramic oil is composed of base oil with nano-ceramic additives and other additives, and can be widely used in the lubrication systems of vehicle internal combustion engines. The performance improves over time, but the price also increases accordingly.
6
2
Share

What to Do When the Door Squeaks?

Solutions for car door squeaking are as follows: 1. Regular lubrication: Car doors are connected to the body via hinges, similar to household doors. It's normal for hinges to make noise over time. To ensure smooth and quiet operation, apply lubricating oil every 2-3 months for maintenance. 2. Use specialized grease: Open the door to its maximum angle, clean the grease and dirt from the limiter arm, limiter pin shaft, and connecting bracket surfaces, then apply an appropriate amount of specialized grease to the upper and lower surfaces of the arm. Recommended products include HOTOLUBE from Tiger Head or Kluber's door hinge and track grease. 3. Replacement: Some vehicles with average assembly quality may have door limiters that are prone to deformation, leading to noise. In such cases, replacement is the only solution.
3
3
Share

What are the reasons for the poor cooling effect of the Tiguan's air conditioning?

Volkswagen Tiguan's air conditioning has poor cooling effect due to insufficient Freon in the air conditioning system, clogged pipes in the switch, or the compressor not functioning properly. Insufficient Freon in the air conditioning system: Freon is a heat-absorbing medium. Only when there is enough Freon in the car's air conditioning system can it effectively remove heat and lower the temperature inside the car. If the system has been used for a long time without regular refilling, or if the Freon level is insufficient due to pipe leaks or air infiltration, it will not be able to absorb enough heat and effectively lower the temperature inside the car, resulting in insufficient cooling. The solution is to add an appropriate amount of Freon. Clogged pipes in the switch: In the car's air conditioning system, there are numerous pipes connecting the condenser to the evaporator, with a large amount of refrigerant flowing through these pipes. If any part of these pipes is clogged with small debris, the flow of refrigerant will be obstructed, and the heat inside the car cannot be effectively transferred. In this case, the temperature inside the car will not decrease, and the cooling effect of the air conditioning will be worse than usual. The solution is to clean out the impurities in the pipes. Compressor not functioning properly: The air conditioning system exchanges heat, and the compressor plays a crucial role in this process. Under the operation of the compressor, liquid refrigerant is converted into gas, absorbing a large amount of heat and releasing it outside the car, thereby lowering the temperature inside the car through circulation. When the compressor is not functioning properly, it needs to be repaired or replaced.
8
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.