What does the Venucia Star 48V mild hybrid mean?

1 Answers
JamesAnn
07/29/25 6:06pm
The composition of the Venucia Star 48V mild hybrid system: 1. The Venucia Star 48V mild hybrid system is essentially an addition of a belt-driven BSG motor, a 48V lithium-ion battery, and a DCDC converter to the original engine. The BSG motor, also known as an integrated starter-generator, combines the functions of both an engine starter and a generator. 2. The 48V lithium-ion battery serves as the energy storage unit of the system. When the 48V motor starts, the lithium-ion battery provides power, and when the 48V motor generates electricity, it replenishes the lithium-ion battery. 3. The DCDC converter connects the 48V high-voltage system with the vehicle's 12V low-voltage system, allowing the 48V lithium-ion battery to supply power to the 12V lead-acid battery.
Was this review help?
9
0
Share
More Forum Discussions

What are the reasons for severe shaking when starting an Audi Q5?

Audi Q5 experiences severe shaking during startup due to the following reasons: 1. Dirty throttle body and excessive carbon buildup in fuel injectors: After driving a certain mileage, a dirty throttle body can cause improper closing or sticking of the idle speed control motor, both of which can result in excessively high engine idle speed. Carbon deposits generated during engine operation can also lead to vehicle shaking, especially during startup when the engine shakes more violently than usual, sometimes even causing failure to start on the first attempt. 2. Aging engine mounts: Vehicle shaking may sometimes be related to aging engine mounts. Engine mounts essentially serve as the vibration damping system for the engine, absorbing minor vibrations during operation. If the engine mounts malfunction, these vibrations can transmit to the steering wheel and cabin, causing shaking during idle.
8
5
Share

Why does the air conditioning stop cooling after removing the front bumper on a Mondeo?

First, check whether any plugs were disconnected or certain pipelines were detached during the removal and installation of the front bumper. The air conditioning system at the front of the bumper primarily involves the ambient temperature sensor. Disconnecting its plug will trigger a fault code, causing the air conditioning to temporarily fail. If the high-pressure or low-pressure pipelines of the air conditioning system were disconnected, the system pressure will be abnormal, and it won't function properly. Below is relevant information about automotive air conditioning: 1. Function: It is used to adjust and control the temperature, humidity, air cleanliness, and airflow inside the car cabin to the optimal state, providing passengers with a comfortable environment and reducing travel fatigue; it also creates favorable working conditions for the driver, playing a crucial role in ensuring safe driving as a ventilation device. 2. Classification: Generally includes refrigeration units, heating units, and ventilation devices. This combined system makes full use of the limited space inside the car, featuring a simple structure and ease of operation, making it a popular modern automotive air conditioning system internationally.
15
4
Share

What is the high beam?

The high beam is focused at its focal point, emitting parallel light rays that are more concentrated and brighter, capable of illuminating distant and high objects. The low beam, on the other hand, is positioned beyond its focal point (between 1x and 2x the focal distance), emitting divergent light that covers a larger area at closer range. Situations for using high beams: 1. Never use high beams when driving at night with streetlights. 2. Use high beams only when there are no streetlights and very few vehicles on the road. 3. When encountering oncoming traffic while using high beams, switch to low beams approximately 150-200 meters away, depending on the situation, and you may switch back to high beams after passing. 4. When overtaking at night with high beams on, switch to low beams and activate the overtaking signal at least 100 meters in advance by quickly pulling the light lever upward 2-3 times while on low beams. 5. If the oncoming vehicle uses high beams at night, flash the overtaking signal 1-2 times to remind them to switch to low beams.
13
3
Share

What is the reason for the EPC light on the Volkswagen Jetta and the inability to accelerate?

Volkswagen Jetta EPC light on and inability to accelerate may be caused by: dirty throttle body; leaks in the intake system; or faults in the crankcase ventilation system. Introduction to the EPC light: In vehicle maintenance, EPC light warnings are relatively common. If this light comes on, it indicates there may be a fault in the electronic throttle system, which could affect the normal operation of the vehicle. Solutions for the EPC light: Troubleshoot the intake system, use fuel that meets standards, clean the throttle body; remove carbon deposits from related parts; reprogram ECU data; other faults cannot be ruled out, and specific actions should be based on reading the fault codes for corresponding treatment.
17
3
Share

What is the fuel tank capacity of the Changan CS75plus?

The fuel tank capacity of the Changan CS75plus is 58L. Below is relevant information about the Changan CS75plus: 1. Introduction: The Changan CS75PLUS is an A+ class SUV, the 'Tomorrow's Vehicle'. As another key model under Changan Automobile's 'Third Entrepreneurship-Innovation and Entrepreneurship Plan' strategy, the CS75PLUS is user-centric, based on deep insights into future travel lifestyles and automotive trends. Leveraging foresight, Changan Automobile's strong reputation among 17 million users, and core technologies, it embodies three key 'tomorrow values'—tomorrow's intelligence, tomorrow's power, and tomorrow's safety—within the mainstream value range. It is a 'tomorrow's vehicle' that 'meets users' future needs', offering a new choice with future value for young consumers with forward-looking vision and innovative thinking. 2. Design Highlights: Superior airbag technology for comprehensive safety protection: Extra-large side curtain airbags with 100% window coverage and anti-rollover design; rapid deployment within 0.03 seconds, millisecond-level response for timely protection; 6 airbags for all-around safety; equipped with Bosch's latest generation airbag controller and 4 airbag sensors, significantly enhancing safety performance.
5
1
Share

What Lights to Turn On in Rainy or Snowy Weather?

When driving in rainy or snowy weather, you can turn on fog lights, low beams, width indicator lights, front and rear position lights, hazard warning lights, etc., basically all lights can be turned on depending on the intensity of rain or snow and the level of visibility. Remember not to turn on high beams. Specific instructions are as follows: When encountering light rain, light snow, or thin fog during driving, with visibility less than 200 meters, you need to turn on the car's fog lights, low beams, width indicator lights, and front and rear position lights. At the same time, ensure the speed does not exceed 60 kilometers per hour. When encountering moderate rain, snow, or fog during driving, with road visibility less than 100 meters, in addition to turning on fog lights, low beams, width indicator lights, and front and rear position lights, you should also turn on the hazard warning flashers (double flashers). Also, ensure the speed does not exceed 40 kilometers per hour. When encountering heavy rain, snow, or thick fog during driving, with road visibility less than 50 meters, the safest practice is to avoid driving if possible. However, if conditions do not permit (such as being on a highway or having no parking options nearby), you must turn on all possible lights on the car, including fog lights, low beams, width indicator lights, front and rear position lights, and hazard warning flashers, but remember not to turn on high beams. Additionally, the driver should ensure the speed is less than 20 kilometers per hour and honk appropriately when unsure about the presence of vehicles or pedestrians ahead or behind, to serve as a warning. Prohibited practices in light usage: Do not use hazard warning lights (double flashers) while driving. The so-called double flashers are hazard warning lights that every car has, with the switch being two interlocking triangles. Double flashers should only be used in very dangerous situations, such as when there is an accident ahead or when you need to temporarily stop on the main road. Generally, we should not use them during normal driving. Misuse of double flashers may convey wrong information to surrounding vehicles, potentially leading to dangerous situations. Avoid using width indicator lights for extended periods. Width indicator lights are not for you to see the road better but for others to see you better. During the gradual changes in rain or snow, it is incorrect to use width indicator lights continuously from start to finish. Instead, you should switch lights reasonably according to the intensity of rain or snow.
4
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.