What does the triangle with an exclamation mark on the Bora display mean?

1 Answers
AlanaDella
07/30/25 5:05am
It indicates a system malfunction. The specific issue depends on which warning light is illuminated simultaneously. Warning light indications: When a yellow light flashes on the dashboard, it means there is a vehicle malfunction. The vehicle can still be driven, but it needs to be inspected as soon as possible. When a red light flashes on the dashboard, you must stop and turn off the engine immediately. Do not continue to drive to prevent damage to the engine and related components. Common warning light explanations: Coolant temperature gauge light on, coolant level too low – At this time, the temperature gauge shows a normal reading (around 100 degrees). Wait until the temperature drops below 90 degrees (to prevent burns) before opening the reservoir cap to add coolant (or water), and promptly visit a repair shop to check the cause of the low coolant level. Fuel gauge light on – This is something most car owners should know. It indicates low fuel. When it first lights up, it means there are about 7 liters of gasoline left in the tank, which can still cover approximately 30-40 kilometers.
Was this review help?
18
1
Share
More Forum Discussions

Is Wheel Balancing Still Needed After Wheel Alignment?

Performing a wheel alignment does not necessarily require a wheel balancing. However, when replacing or repairing a tire, if the tire is removed from the rim and then reinstalled, wheel balancing must be performed. Failure to do so can cause noticeable tire vibration at certain speeds. More details are as follows: 1. Wheel alignment involves adjusting the geometric angles of the tires, steering, suspension, and other components to ensure tight contact between the tires and the ground. The installation of a vehicle's four wheels, steering mechanism, and front and rear axles should maintain specific relative positions, which are standard values set by the manufacturer. Adjusting and restoring these positions is what wheel alignment entails. 2. Wheel balancing corrects the balance of the wheel (tire and rim assembly) to ensure the tire moves concentrically. Due to manufacturing variations, the mass distribution of a wheel is not perfectly uniform. When the wheel rotates at high speeds, this can lead to dynamic imbalance, causing wheel wobble and steering wheel vibration during driving. To prevent or eliminate this phenomenon, weights are added to the wheel in dynamic conditions to correct the balance at various edges.
10
2
Share

Is the BMW 6 Series GT Based on the 7 Series or 5 Series Chassis?

BMW 6 Series GT is based on the 5 Series chassis. More details about the BMW 6 Series GT are as follows: 1. Overview: The BMW 6 Series GT is the successor to the BMW 5 Series GT and is now part of the 6 Series product lineup for sales. This model shares the CLAR platform with the BMW 5 Series. It made its official debut at the Frankfurt Motor Show in September 2017. In terms of powertrain, there are two versions: the 30 version is equipped with a 2.0T engine paired with an 8AT transmission, delivering a maximum horsepower of 258 PS; the 40 version features a 3.0T engine matched with an 8AT transmission, producing a maximum horsepower of 340 PS. 2. Other Features: It showcases a unique aesthetic design concept with sculpted and clear contours, capturing attention at first glance. The streamlined design language combines with comfort-oriented concepts, blending luxury design style with practical functionality to meet diverse needs. When elegance and sportiness merge into one, the dream travel companion is born.
7
0
Share

Is the BMW X4 four-wheel drive or two-wheel drive?

BMW X4 is four-wheel drive. More details about BMW X4 are as follows: 1. Overview: The BMW X4 is an SUV model positioned between the X3 and X5. In terms of appearance, the BMW X4 draws inspiration from the 3 Series, featuring front headlight clusters connected to the grille on the front fascia. The rear design maintains high similarity with the new 3 Series, while the body shape closely resembles the X6. 2. Powertrain: The BMW X4 initially offered two engine options - 2.0T and 3.0T. The 2.0T delivers maximum horsepower of 184hp and 245hp respectively, while the 3.0T version produces 306hp. As competition in the global SUV market intensifies, BMW, being a mainstream brand in the luxury car market, naturally seeks to gain more market share. On July 29, 2014, the BMW X4 entered the Chinese market with four model variants.
11
3
Share

How to Clear the Maintenance Reminder in a Car?

Methods to clear the car maintenance reminder: 1. Turn the car key to the ON position (turn the key twice or press the start button twice for keyless ignition). 2. Then, use the selection button on the steering wheel to navigate to the vehicle status and press the reset button for about 5 seconds (hold the reset button without releasing it). 3. Turn off the power, keeping the reset button pressed, and then turn the car power back on. 4. Finally, the maintenance reminder will be cleared. The wrench warning light on the car dashboard indicates that it's time for maintenance, though this doesn't necessarily mean immediate servicing is required. Normally, after servicing the vehicle, mechanics usually reset the mileage and time from the last service. Depending on the type of oil used, they will set different mileage and time intervals for the next service.
7
5
Share

What are the S and L gears for in the Honda Accord?

S stands for Sport mode, which shifts at higher RPMs. The L gear is the Low gear, which can be engaged when driving on slippery roads like during snow or on steep uphill sections. The L gear is equivalent to the 1st or 2nd gear in a manual transmission. More details about the Honda Accord are as follows: 1. Overview: The Accord (Accord), a practitioner of Honda's innovative spirit and global leading technology, has a 38-year history worldwide. The original tires for the Accord are Michelin's ultra-high-performance Pilot Super Sport tires. On April 16, 2018, the all-new Honda Accord, also known as the 10th-generation Honda Accord, was officially launched in China. 2. Others: The exterior design of the new-generation Accord continues the North American version's design, with an overall style that remains grand and stable. The main difference between the domestic version and the North American version is the large chrome grille on the front face. According to designer Mr. Toshio Okamoto, this change was made based on the preferences of domestic consumers.
19
4
Share

What does the M gear mean?

M gear refers to the manual mode of an automatic transmission. In this mode, you can shift gears just like in a manual transmission vehicle, upshifting at high speeds and downshifting at low speeds. To use the manual shifting mode, you need to move the gear lever to the "M" position. Here are several scenarios where manual mode is useful: 1. When climbing a long, steep slope, you can switch to manual mode and engage 1st gear. This keeps the vehicle in a low gear, preventing frequent gear shifts, which makes the climb more powerful and also protects the transmission. 2. When descending a long slope, you should also use manual mode to keep the transmission in a low gear. This helps control the vehicle's speed without needing to constantly apply the brakes, avoiding overheating and maintaining braking performance. 3. When accelerating to overtake, switching to manual mode and downshifting first allows the vehicle to utilize the high torque of a lower gear for a quick speed boost, enabling faster overtaking.
8
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.