What Does the Triangle with an Exclamation Mark Mean in a Car?

1 Answers
Ferreira
07/30/25 5:39am
A triangle with an exclamation mark indicates a malfunction in the vehicle's general performance, components, or functions. Common issues include parking sensor failure, fuel cutoff system intervention or malfunction, external light failure, or engine oil pressure sensor failure. Solution: Visit a 4S dealership for inspection to identify the source of the fault. The exclamation mark is a common warning symbol in cars. Besides the triangle with an exclamation mark, there are four other forms of exclamation mark warnings: a yellow gear with an exclamation mark, a red circle with parentheses and an exclamation mark in the middle, a yellow parentheses with a horizontal line and an exclamation mark in the middle, and a yellow bulb with an exclamation mark. Below is a detailed analysis of these four scenarios: Automatic Transmission Fault: A yellow gear with an exclamation mark indicates an automatic transmission fault warning, signaling issues with the transmission or low transmission fluid levels. Immediate replacement of transmission fluid is required. Brake System Fault: A circle with parentheses and an exclamation mark in the middle represents a brake system warning, indicating either a malfunction in the brake system or low brake fluid levels. Immediate inspection of the brake system is necessary to avoid accidents. Tire Pressure Anomaly: A parentheses with a horizontal line and an exclamation mark in the middle indicates a tire pressure monitoring warning light, which illuminates when the tire pressure is too low. Check the tire pressure and restore it to the normal range. Lighting Fault: A yellow bulb with an exclamation mark is a lighting fault indicator, signaling a malfunction in one of the vehicle's lights. Solution: Visit a 4S dealership for inspection as soon as possible. Alternatively, you can perform a self-check, focusing on commonly used bulbs such as turn signals, fog lights, and interior lights, to identify the issue.
Was this review help?
10
2
Share
More Forum Discussions

What Causes a Truck to Emit Black Smoke?

The reasons for a truck emitting black smoke are as follows: 1. Wear of piston rings, cylinder liners, etc.: After the valves, piston rings, and cylinder liners wear out, it leads to insufficient compression pressure and oil entering the combustion chamber. This alters the normal air-fuel mixture ratio at the end of the compression stroke, causing the fuel to burn under oxygen-deficient conditions. The combustion process tends to produce carbon deposits, and the exhaust forms large amounts of black smoke. 2. Excessive fuel supply: An excessive fuel supply increases the amount of oil entering the cylinder, resulting in a fuel-rich mixture that burns incompletely. Additionally, excessive workload, poor fuel quality, and low operating temperature can also cause black smoke emissions. 3. Changes in combustion chamber shape: The shape of the combustion chamber may degrade due to manufacturing quality or long-term use, leading to excessive or insufficient compression clearance or incorrect piston positioning. These changes affect the combustion chamber's shape and volume, impairing the quality of the fuel-air mixture and worsening fuel combustion conditions.
15
1
Share

What is the fuel consumption of the manual Hyundai Elantra?

The vehicle's combined fuel consumption is 5.6L per 100 kilometers. The above figure is the NEDC combined fuel consumption, which is the data obtained under the NEDC test procedure for combined driving conditions. The actual fuel consumption is higher than this value, ranging from 5.6-7.3L/100km. The fuel consumption of a car is directly related to five major factors: driving habits, the car itself, road conditions, natural wind, and environmental temperature. Specific factors that can increase fuel consumption are as follows: Driving habits: Aggressive driving, such as sudden acceleration, frequent overtaking, and not easing off the throttle before stopping at a red light, can increase fuel consumption. The car itself: Cars with larger engine displacements generally consume more fuel than those with smaller displacements because larger displacements usually mean higher power output, requiring more gasoline to burn and perform work. Heavier cars also consume more fuel because greater weight requires more driving torque. Road conditions: Driving on dirt roads, muddy roads, soft surfaces, or mountainous roads increases resistance and fuel consumption. Natural wind: Driving against the wind or on windy days increases the car's resistance and fuel consumption. Low environmental temperatures: When the engine block temperature is low during cold starts, the injected gasoline is less likely to atomize, requiring more gasoline to be injected for combustion, thus increasing fuel consumption. Additionally, at low temperatures, the engine's computer will control the engine to run at higher RPMs to warm up, which also increases fuel consumption.
6
2
Share

How to Tell If a Vehicle Has a Particulate Filter?

To determine whether a vehicle is equipped with a particulate filter, you can use the following three methods: Check the Owner's Maintenance Manual and Owner's User Manual to see if they mention the particulate filter function. Additionally, carefully review the fault codes in the manual to check for a "Particulate Filter" warning light indicator. Inspect the label on the oil filler cap. If the cap clearly specifies 0W-20 grade oil, it indicates the presence of a particulate filter. Look behind the catalytic converter on the exhaust pipe for an additional cylindrical section. If present, that is the particulate filter. A particulate filter is a ceramic filter installed in the exhaust system of diesel engines. It captures particulate emissions before they enter the atmosphere, reducing soot produced by diesel engines by over 90%. The captured particulate matter is subsequently burned off during vehicle operation.
9
0
Share

What are the functions of the three-button key for the Haoying Luxury Edition?

Luxury Edition models come with a key fob featuring four buttons: lock, unlock, left rear door opening, and right rear door opening. Pressing the unlock button can simultaneously lower all four windows, while holding down the lock button can raise all four windows at once. Below are precautions for key battery replacement: 1. Proper Replacement: Incorrect battery replacement may damage the car key. 2. Suitable Battery: Using an unsuitable or non-compliant battery may damage the car key. When purchasing a new battery, pay attention to its voltage, size, and specifications. 3. Correct Installation: Always install the battery correctly. Damage to the key caused by self-replacement of the battery is not covered under the quality warranty.
16
0
Share

What do China-spec and Middle East-spec versions mean?

China-spec refers to models produced by manufacturers specifically for the Chinese market, while Middle East-spec denotes vehicles designed for sale in Middle Eastern regions such as Arab countries. Relevant explanations are as follows: 1. Some major foreign automakers: Produce different specification models to suit various regions. Middle East-spec cars are parallel imported vehicles brought from the Middle East to China. Parallel imported cars, fully termed parallel trade imported vehicles, are purchased by traders from overseas markets and sold in China without brand manufacturer authorization. 2. China-spec vehicles generally have better audio systems: They feature superior sealing and advantageous power tuning, though navigation screens may require Chinese language updates, and some odometers display miles. 3. China-spec models are tailored for China: They are more compatible with Chinese fuel quality, road conditions, and climate. European-spec cars demand high fuel quality, which most Chinese regions cannot meet, potentially causing fuel system blockages and, in severe cases, requiring major engine repairs.
17
1
Share

What to Do When the Car Cover Gets Wet in the Rain?

After it rains, it is best not to remove the car cover immediately. Wait until the weather clears up, and let the cover dry in the sun before taking it off and storing it. If the cover is removed before it dries completely and left damp for too long, it may develop mold and become more prone to damage. Additionally, the car's paint will not fade. Below is more related information: The main functions of a car cover: 1. Besides cleaning and sun protection, a car cover also has excellent water-repellent properties, preventing damage from freezing temperatures in cold weather. It effectively protects against accidental damage from falling objects, fireworks, and other unexpected factors, as well as deterring theft of the vehicle and its accessories. However, the use of a car cover should be moderate. For car owners without parking spaces, it is essential to have a car cover, but it should not be used every day. 2. To achieve the best coverage and protection for the vehicle, a new type of car cover support has been introduced. The support lifts the car cover away from the car's painted surface, utilizing the insulating properties of air to provide highly effective sun protection. The separation between the cover and the car's surface also offers some hail protection and prevents friction between the fabric and the car, eliminating the risk of scratches.
12
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.