What does the triangle exclamation mark on the Jetta VS5 dashboard indicate?

2 Answers
Cynthia
08/31/25 5:05am
The triangle exclamation mark indicator on the car dashboard is a general fault warning light. Meaning of the general fault warning light: Possible indications include: dry dual-clutch transmission clutch overheating, fuel cut-off system intervention or malfunction, parking sensor failure, exterior light bulb failure, engine oil pressure sensor malfunction, or traction control system warning/failure. Other exclamation mark warning lights: There are various warning lights with exclamation marks on the dashboard. The eight common types are: handbrake warning light, brake system fault warning light, steering system fault warning light, abnormal tire pressure warning light, lighting system fault warning light, transmission fault warning light, wiper system fault warning light, and general fault indicator light.
Was this review help?
14
1
Share
Pete
09/12/25 8:21am
I've been driving for almost twenty years, and when that triangle exclamation mark light on the dashboard comes on, it's often because the tire pressure is a bit low or there's a minor engine issue. The Jetta VS5 owner's manual refers to it as a warning light, reminding you not to take it lightly. My advice is to first find a safe place to pull over and check the other instrument displays. If there are other lights illuminated on the instrument cluster, the problem might be more serious, such as insufficient oil or a brake system malfunction. Regular vehicle maintenance, like frequently checking tire pressure and oil levels, can help avoid these sudden warning lights. If you can't resolve the issue immediately, don't push through—get a professional mechanic to take a look as soon as possible. Safety always comes first, no matter what.
Was this review help?
14
3
Share
Expand All
More Forum Discussions

What causes abnormal noise from car tires?

Tire abnormal noise can be caused by the following reasons: 1. Suspension ball joint: Loose lower suspension arm ball joint with excessive clearance can produce noise when the car bumps. 2. Aging plastic components: Loose stabilizer bar bushings with excessive clearance will also generate abnormal noise. 3. Damaged shock absorber: A faulty shock absorber can cause noise when driving on uneven roads. Although shock absorbers have a relatively long service life, they are still a wearable component. If the vehicle operates in harsh conditions or is frequently driven aggressively, damage or oil leakage may occur. Additional information: If the buffer rubber has aged, simply replace the rubber. If the shock absorber is damaged or leaking, the entire shock absorber needs to be replaced.
17
2
Share

How far can a general 60V 20Ah battery go?

Generally, it can travel 50-60 kilometers. When driving in low gear, a single person can travel about 70 kilometers, in medium gear about 60 kilometers, and in high gear about 45-50 kilometers. Factors affecting the range: 1. Road conditions: Whether there are many traffic lights, traffic congestion, uphill roads, bumpy roads, smooth roads, or frequent starts—all these can consume a lot of electrical energy and affect the range. 2. Temperature: Low temperatures in winter significantly impact battery capacity, sometimes reducing it by half. 3. Driving habits: Avoid sudden acceleration and hard braking, as these can reduce the range.
17
5
Share

Does the Santa Fe cigarette lighter have current limiting?

The Santa Fe cigarette lighter has current limiting. The cigarette lighter is a component found in all vehicles, designed to provide a flame source for smokers. Commonly referred to cigarette lighters can be divided into those that draw power from the vehicle's electrical system. Some manufacturers produce cigarette lighters not for lighting cigarettes but solely for drawing power from the vehicle, which are also known as cigar lighters. The method for removing and installing the cigarette lighter is as follows: 1. Unscrew the housing: For some vehicles, the cigarette lighter socket has a screwed-on housing at the back, which can be unscrewed by turning it counterclockwise and reinstalled by turning it clockwise; 2. Remove screws: For some vehicles, the cigarette lighter socket is secured with screws at the back. Simply use a wrench to remove the screws to take it off, and reinstall it by screwing the screws back in; 3. Remove the panel: Remove the gear shift lever panel, which is attached with plastic clips. You can pry one side up by hand or with a flathead screwdriver to detach the entire panel; 4. Remove panel screws: After removing the gear shift lever panel, the cigarette lighter panel door will automatically open, revealing two black screws. Use an M4 hex key to remove them; 5. Remove the panel box: Pull the plastic panel box of the cigarette lighter out by hand. When it's pulled out about 10 centimeters, disconnect the wiring harness before pulling the entire box out; 6. Operate the inner and outer rings: The cigarette lighter consists of an outer and inner ring. Press the inner ring in to use it. Once it reaches a certain temperature, the inner ring will automatically return to its original position, at which point you can pull it out by holding the outer ring.
8
3
Share

How to Solve Water Leakage Inside the Car?

The solutions for water leakage inside the car are: 1. Replace the rubber seal of the sunroof; 2. Clean small sand particles and dust from the sunroof drainage channel; 3. Ensure the sunroof is properly closed; 4. Unclog the drainage pipe. The causes of water leakage inside the car are: 1. Small sand particles and dust in the sunroof drainage channel causing blockage; 2. Failure of the car's waterproof seal; 3. The sunroof glass is not properly closed; 4. Malfunction of the sunroof drainage system. The effects of car water leakage are: 1. Minor leakage at the sunroof can lead to mold; 2. Door leakage can damage the door lock and affect the window lifting system; 3. Trunk leakage can cause corrosion.
17
1
Share

What Causes Steering Wheel Pulling to One Side?

Steering wheel pulling to one side can be caused by: 1. Uneven tire pressure; 2. Different tire tread patterns or varying tread depths; 3. Deformation of front shock absorber springs; 4. Failure of front shock absorbers; 5. Body deformation; 6. Excessive wear of chassis components; 7. Incorrect wheel alignment; 8. Brake system malfunction. Steering wheel pulling refers to the phenomenon where a vehicle traveling straight on a flat road naturally drifts to one side, causing misalignment between the centerline of the front and rear axles and the vehicle's actual travel path. Adjustment methods include: 1. Slightly adjusting the steering wheel to the right when the vehicle drifts left, and vice versa; 2. Rotating or replacing tires; 3. Replacing suspension springs.
4
1
Share

Why is the ETC light not on?

The reasons why the ETC light is not on are: 1. The ETC device is damaged; 2. The ETC device is out of power. The method to install ETC is: 1. Peel off the double-sided adhesive plastic film on the back of the ETC device and stick it to the position behind the rearview mirror at the top of the windshield; 2. Press firmly for about 10 seconds after sticking; 3. Insert the card into the ETC device repeatedly several times. Precautions for using ETC include: 1. The ETC transaction sensing area is 8 meters. To prevent the ETC device failure of the vehicle in front, keep a distance of more than 10 meters from the vehicle in front; 2. The recognition speed of the ETC lane is 20 kilometers per hour. If the speed is too fast, the vehicle device information cannot be read, which will lead to charging failure; 3. When using a debit card to bind ETC, insufficient balance will also lead to charging failure.
4
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.