What does the triangle exclamation mark on the Haval H4 dashboard indicate?

1 Answers
IanAnn
07/29/25 9:01pm
A triangle with an exclamation mark inside indicates a malfunction in the vehicle's general performance, components, or functions. Common causes include parking sensor failure, fuel cutoff system intervention or malfunction, external light failure, or engine oil pressure sensor failure. Solution: Visit a 4S shop for inspection to identify the source of the fault. The exclamation mark is a common fault indicator in vehicles. Besides the triangle with an exclamation mark, there are four other forms of exclamation mark warnings: a yellow gear with an exclamation mark inside, a red circle with brackets and an exclamation mark in the middle, a yellow bracket with a horizontal line and an exclamation mark in the middle, and a yellow bulb with an exclamation mark. Below is a detailed analysis of these four scenarios: Automatic transmission fault: A yellow gear with an exclamation mark inside indicates an automatic transmission fault warning light, signaling a transmission malfunction or transmission lubricant level below the normal range. The transmission oil should be replaced promptly. Brake system fault: A circle with brackets and an exclamation mark in the middle represents a brake system warning, indicating either a brake system malfunction or low brake fluid level. Immediate inspection of the brake system is required to avoid accidents. Tire pressure anomaly: A bracket with a horizontal line and an exclamation mark in the middle indicates a tire pressure monitoring warning light, which illuminates when the vehicle's tire pressure is too low. Check the tire pressure and restore it to the normal range. Lighting fault: A yellow bulb with an exclamation mark indicates a lighting fault warning light, signaling a malfunction in one of the vehicle's lights. Solution: Visit a 4S shop as soon as possible for inspection and repairs, or conduct a self-check focusing on commonly used bulbs such as turn signals, fog lights, and interior lighting to identify the issue.
Was this review help?
13
3
Share
More Forum Discussions

What are the reasons why a Volkswagen Santana has power but won't start?

Volkswagen Santana has power but won't start for the following reasons: Electrical or electronic failure: The occurrence is very sudden, without any warning. Electrical failures include: blown fuse, open circuit in the high-voltage coil, open circuit in the low-voltage circuit, detached central ignition wire, leaking distributor rotor, damaged spark plug. Electronic failure mainly refers to the loss of function of the central computer control board. Fuel system failure: Stalling caused by fuel system failure often has symptoms such as weak engine power and the accelerator pedal feeling like stepping on cotton. Possible locations of fuel system failure include: malfunctioning fuel pump, blocked fuel line, clogged fuel filter, failed carburetor, damaged injector, etc. Sometimes, the fuel tank may be empty without the owner's knowledge. Adding a few liters of gasoline can solve all the problems.
20
1
Share

Can I Change the Color on the Day of Vehicle Pickup?

Yes. Here are the relevant details: 1. Relevant regulations: To process the color change procedure, the applicant needs to bring the required documents to the vehicle management office for application. If compliant with regulations, the applicant can receive the "Approval for Change Notice," proceed to a 4S shop or auto repair shop for repainting, and after the vehicle color is changed, the vehicle owner or their agent must bring the necessary certificates along with the repainting invoice from the 4S shop or auto repair shop, and drive the repainted vehicle back to the vehicle management office for inspection procedures. 2. Notes: The vehicle body color cannot be identical or similar to that of special-purpose vehicles, the area covered by color-changing film cannot exceed one-third of the vehicle body, and the vehicle body cannot have more than three colors.
5
4
Share

Where is the license plate code 'Lu K' from?

Lu K is the license plate code for Weihai City in Shandong Province. The license plate codes for other regions in Shandong Province are as follows: Lu A for Jinan, Lu B for Qingdao, Lu C for Zibo, Lu D for Zaozhuang, Lu E for Dongying, Lu F for Yantai, Lu G for Weifang, Lu H for Jining, Lu J for Tai'an, Lu K for Weihai, Lu L for Rizhao, Lu M for Binzhou, Lu N for Dezhou, Lu P for Liaocheng, Lu Q for Linyi, Lu R for Heze, Lu S for Laiwu, Lu U for Qingdao supplementary, Lu V for Weifang supplementary, Lu Y for Yantai supplementary. A license plate number is a legal mark registered by statutory authorities, permitting motor vehicles to operate on roads, serving as an identifier for vehicle identity. It is generally displayed at specific locations on motor vehicles.
6
1
Share

How Long Does It Take to Get Traffic Violation Results?

Generally, it takes 3 to 7 days to check traffic violations after they occur. Below is relevant information about vehicle violations: 1. SMS Notification: Usually, an SMS reminder will be sent within 1-3 working days after a violation occurs. As long as the violation is handled before the annual inspection, there should be no issue. However, note that on-the-spot violations may incur late fees if not paid within 15 days. To pay the fine, the driver only needs to bring their motor vehicle driving license and personal ID. 2. The following violations will result in a 2-point deduction: Cutting in line during traffic jams or occupying the opposite lane; Not waiting at the designated lane for traffic lights; Overloading by less than 20%.
11
2
Share

What is the top speed of the Kawasaki H2R?

Theoretical 420km/h at 16,000 rpm; currently achieves 400km/h at 14,500 rpm. Below is an introduction to the Kawasaki H2R: 1. The Kawasaki H2R motorcycle has 2 gears, capable of reaching 180km/h in first gear alone, with a top speed exceeding 400km/h. 2. Building upon the traditional 200 horsepower, Kawasaki increased the power output by 50%, pushing the horsepower directly to 300. 3. The Kawasaki H2R's 300 maximum horsepower is delivered by a 998cc, centrifugal turbocharged supercharged water-cooled inline four-cylinder engine. The development of this engine received substantial technical assistance from Kawasaki Heavy Industries' aerospace division, equivalent to a 1L displacement engine producing 300 horsepower, which imposes extremely high demands on the engine's manufacturing process.
5
2
Share

How to Use the Remote Engine Start Feature on BMW 3 Series?

To use the remote start feature on the BMW 3 Series, you must first press the brake pedal before starting. Look for the start/stop button, which activates the remote start function. More relevant information is as follows: 1. The BMW 3 Series still offers 1.5T and 2.0T high and low power options. 2. The 1.5T model has a maximum power of 100kW (136PS) and a maximum torque of 220N·m; the 2.0T low-power version has a maximum power of 135kW (184PS) and a maximum torque of 270N·m; the 2.0T high-power version has a maximum power of 185kW (252PS) and a maximum torque of 350N·m, all paired with an 8-speed automatic transmission.
12
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.