What does the triangle exclamation mark on the Haval dashboard mean?

1 Answers
EvangelineMarie
07/24/25 12:09am
A triangle with an exclamation mark indicates a malfunction in the vehicle's general performance, components, or functions. Common causes include parking sensor failure, fuel cutoff system intervention or malfunction, external light failure, or engine oil pressure sensor failure. Solution: Visit a 4S shop for inspection to identify the source of the fault. The exclamation mark is a common fault warning in vehicles. Besides the triangle exclamation mark, there are four other forms of exclamation mark warnings: a yellow gear with an exclamation mark, a red circle with parentheses and an exclamation mark in the middle, a yellow bracket with a horizontal line and an exclamation mark in the middle, and a yellow bulb with an exclamation mark. Below is a detailed analysis of these four scenarios: Automatic transmission fault: A yellow gear with an exclamation mark indicates an automatic transmission fault warning light, signaling a transmission issue or low transmission fluid. The transmission fluid should be replaced promptly. Brake system fault: A red circle with parentheses and an exclamation mark in the middle indicates a brake system warning, often due to brake system failure or low brake fluid. Immediate inspection is required to avoid accidents. Tire pressure anomaly: A yellow bracket with a horizontal line and an exclamation mark in the middle represents the tire pressure monitoring warning light, which illuminates when tire pressure is too low. Check and restore tire pressure to the normal range. Lighting fault: A yellow bulb with an exclamation mark is the lighting fault indicator, signaling a malfunction in the vehicle's lights. Solution: Visit a 4S shop for inspection as soon as possible, or conduct a self-check focusing on commonly used bulbs such as turn signals, fog lights, and interior lights to identify the issue.
Was this review help?
13
0
Share
More Forum Discussions

Does the driver's license need to be collected in person?

It cannot be collected by others; it must be collected in person. Here is the relevant information: 1. Overview: The full name of the driver's license is the motor vehicle driver's license, also known as the "driver's license," which is a certificate required by law for motor vehicle drivers. Driving a motor vehicle requires certain driving skills, and those who lack these skills may cause traffic accidents if they drive recklessly. Driving without a license is not allowed. 2. Notes: The permission to drive a vehicle is granted through the issuance of a driver's license. This indicates that obtaining a driver's license is a formal process that must be carried out by a specialized authority.
14
5
Share

How to Repair a Cracked Car Front Bumper?

To repair a cracked car front bumper, you should use filler repair strips and putty. Here are the relevant details:1. Causes: The front bumper of a car is usually made of plastic with a certain degree of toughness and flexibility, while the decorative parts or grille decorations on the bumper are typically made of hard plastic. If the hard plastic decorations are cracked, they can only be replaced. However, if the bumper itself has a crack, you can choose between plastic welding or replacement depending on the size of the crack.2. Notes: Thinning the bumper wall can also lead to demolding difficulties. Due to the small wall thickness and minimal shrinkage, the product tends to adhere tightly to the mold. The high injection speed makes it challenging to control the holding time, and the thin walls and reinforcing ribs are prone to damage during demolding.
2
4
Share

What engine does Baojun use?

Baojun uses a 1.5L naturally aspirated engine. Naturally aspirated engine: It is a type of automobile air intake, where atmospheric pressure forces air into the combustion chamber without any supercharger. Working principle of naturally aspirated engine: The naturally aspirated type has no supercharger, meaning air simply passes through the air filter, throttle, intake manifold to reach the cylinder, and gasoline is directly injected into the intake manifold through the fuel injector. Advantages of naturally aspirated engine: In terms of smoothness in power output and directness in response, naturally aspirated engines are far superior to supercharged engines. The current V8 2.4L F1 engine is the best example.
6
1
Share

Is driving at 85 in an 80 km/h average speed zone considered speeding?

Speeding. Below are the relevant details: 1. Average speed measurement: This refers to the method of detecting the average speed of a motor vehicle passing through a section of road (speed measurement zone) between two adjacent speed monitoring points. For example, if the distance of a speed measurement zone on a highway is 10 kilometers with a speed limit of 120 km/h, a vehicle that takes 5 minutes or more to complete the distance would have an average speed below 120 km/h, meeting the speed limit requirement; if it takes less than 5 minutes to pass through the zone, it would be speeding. 2. Penalties for speeding in highway average speed zones are as follows: A warning is issued for speeding less than 10% on highways or national roads, with no points deducted or fines imposed; for speeding between 10% and 20%, 3 points are deducted and a fine of 200 yuan is imposed.
9
0
Share

What are the reasons for the large injection pulse width of the Bora Classic?

Bora Classic injection pulse width is too large for the following reasons: Observe with idle speed: If the injection pulse width is too large, it is generally necessary to observe it in conjunction with the idle speed. If the idle speed is high and the pulse width is large, it is usually caused by false signals from the throttle position sensor or coolant temperature sensor. If the idle speed is normal, then the oxygen sensor is likely to be faulty. Caused by inaccurate closed-loop data: Inaccurate closed-loop data received by the ECU can also lead to this issue. Among these data, the oxygen sensor and coolant temperature sensor are the primary factors, though the intake pressure sensor and throttle position sensor should not be ruled out. Use a Bluetooth OBD scanner to identify the source of the problem.
10
0
Share

Is Subject 2 or Subject 3 Harder to Schedule?

Subject 3 is more difficult to schedule. Here is more information about the Subject 3 test: 1. Content of the Subject 3 test: The road driving skills test for Subject 3 generally includes: preparation before getting in the car, simulated lighting test, starting, driving straight, shifting gears, changing lanes, parking by the roadside, going straight through intersections, turning left at intersections, turning right at intersections, passing pedestrian crossings, passing school zones, passing bus stops, meeting oncoming vehicles, overtaking, making U-turns, and nighttime driving. 2. Notes for the Subject 3 test: Stay calm during the test. When shifting gears and operating lights, do not let nervousness affect your performance, and avoid losing points on the simplest procedures. Practice is key to passing the Subject 3 test. Observe carefully during practice, and be able to handle unexpected situations flexibly, ensuring a flawless performance during the actual test.
17
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.