What does the triangle exclamation mark in a Peugeot 307 mean?

2 Answers
McElaina
07/25/25 9:18am
A triangle with an exclamation mark inside indicates a malfunction in the vehicle's general performance, components, or functions. Common issues include parking sensor failure, fuel cut-off system intervention or malfunction, external light failure, or engine oil pressure sensor failure. Solution: It is necessary to visit a 4S shop for inspection to identify the source of the fault. The exclamation mark is a common fault indicator in vehicles. Besides the triangle with an exclamation mark, there are four other forms of exclamation marks: a yellow gear with an exclamation mark inside, a red circle with brackets and an exclamation mark in the middle, a yellow bracket with a horizontal line and an exclamation mark in the middle, and a yellow bulb with an exclamation mark. Below is a detailed analysis of these four scenarios: Automatic transmission fault: A yellow gear with an exclamation mark inside is the automatic transmission fault warning light, indicating a fault in the transmission or transmission lubricant below the normal range. Transmission oil should be replaced promptly. Brake system fault: A circle with brackets and an exclamation mark in the middle represents a brake system warning, mainly indicating a brake system malfunction or low brake fluid level. The brake system should be inspected immediately to avoid accidents. Tire pressure anomaly: A bracket with a horizontal line and an exclamation mark in the middle represents the tire pressure monitoring warning light, which illuminates when the tire pressure is too low. Check the tire pressure and restore it to the normal range. Lighting fault: A yellow bulb with an exclamation mark is the lighting fault indicator, signaling a malfunction in the vehicle's lights. Solution: Visit a 4S shop for inspection as soon as possible, or conduct a self-check, focusing on commonly used bulbs such as turn signals, fog lights, and interior lights to identify the issue.
Was this review help?
19
0
Share
VanCamilla
08/11/25 7:15pm
When driving a Peugeot 307, seeing the triangle exclamation mark light up on the dashboard indicates that the car is alerting you to an abnormal situation, which could be a precursor to a major issue. Having driven for over a decade, I’m most afraid of ignoring these warning lights. Common causes include brake system failures such as insufficient brake fluid or ABS system malfunctions, tire pressure monitoring triggers, or aging electronic components like faulty engine-related sensors. This is especially dangerous during rainy weather or long-distance driving when the light suddenly comes on, as it can affect the vehicle’s stability. In such cases, I immediately pull over safely to check the brakes and tire pressure. If everything seems normal but the light remains on, don’t hesitate—head straight to a repair shop for a professional technician to scan the fault codes with a diagnostic tool. For regular maintenance, I recommend frequently checking fluid levels to prevent sudden failures that could compromise safety.
Was this review help?
9
4
Share
Expand All
More Forum Discussions

Compass Key Battery Model

Compass key battery model is 3V, CR2033. Method to disassemble Jeep Compass key: Wipe the key surface clean with paper, then use a screwdriver to remove the remote cover. Gently remove the key blade, insert the screwdriver into the slot, turn it clockwise to completely separate the two parts of the remote. After removing the cover, install the new battery following the same method as the old battery. Basic principle: The key emits weak radio waves which are received by the car antenna. The electronic control unit (ECU) identifies the signal code, then the system's actuator (motor or electromagnetic coil) executes the lock/unlock action. This system mainly consists of a transmitter and receiver.
8
4
Share

Do Automatic Cars Need to Engage the Handbrake When Parking?

Automatic cars need to engage the handbrake when parking. Below are the methods for parking an automatic car and an introduction to the car's gear positions: Methods for parking an automatic car: First, press the foot brake to stop the car, then shift the gear from D to N, and engage the handbrake. Release the foot brake, but do not turn off the power, then press the foot brake again, shift the gear from N to P, release the foot brake, and turn off the power. Introduction to car gear positions: Car gear positions include L, B, P, R, N, D, and S. L stands for Low gear, which is used when climbing hills to maintain high RPM and low gear. B is the Brake gear, used when driving on long downhill sections. Engaging B gear allows engine braking to intervene, preventing accidents caused by overheating brake pads due to prolonged use of the service brake. P is the Park gear. When parking, the gear should be shifted to P, which stops the car from moving and prevents it from rolling. R is the Reverse gear, used when the car is moving backward. However, R gear should only be engaged when the car is completely stopped to avoid severe damage to the transmission. N is the Neutral gear, used for short stops, such as waiting at traffic lights. D is the Drive gear, used when the car is moving forward. S is the Sport mode, where the transmission freely shifts gears based on current speed and the driver's throttle input, but with a slight delay during gear shifts.
7
4
Share

What does 2.0t mean for motor vehicles?

2.0t in motor vehicles refers to the engine displacement, where 't' stands for turbocharged engine. A 2.0t engine is essentially a 2.0L naturally aspirated engine equipped with a turbocharger to enhance the engine's output power and torque. Compared to a regular 2.0L naturally aspirated engine, a 2.0t engine delivers greater power. However, when the vehicle reaches a certain speed range, the turbocharger kicks in, increasing the air intake. An engine is a machine capable of converting other forms of energy into mechanical energy. It originated in the UK and can refer to either a power generation device or the entire machine including the power unit (such as gasoline engines, aircraft engines).
12
1
Share

Reasons for High Fuel Consumption in BMW 3 Series

BMW 3 Series high fuel consumption is caused by engine technical conditions leading to excessive fuel consumption and chassis technical conditions causing fuel overconsumption. Solutions for excessive fuel consumption: When the fuel consumption rate during use is higher than the factory specifications or standard values, adjust the main metering needle or replace with an appropriate main jet. For components that are damaged, malfunctioning, or improperly adjusted (such as delayed ignition, improper spark plug gap, improper breaker contact gap, etc.), excessive fuel supply, uneven fuel supply among cylinders, or poor atomization, timely adjustments should be made. Maintain normal tire pressure levels: Remove unnecessary items from the car to maintain normal tire pressure levels. Insufficient tire pressure significantly increases rolling resistance, and tire misalignment or excessive wear may also lead to increased fuel consumption.
15
5
Share

How to Release the Electronic Parking Brake?

To release the electronic parking brake, simply press the electronic parking brake button. The electronic parking brake is a technology that achieves parking braking through electronic control, and its working principle is the same as that of a mechanical handbrake, both of which control parking braking through the friction generated between the brake disc and brake pads. The advantages of the electronic parking brake are: 1. The parking brake handle is eliminated inside the cabin, providing more design flexibility for the overall interior styling; 2. A single button replaces the brake handle for parking braking, making it simple and effortless; 3. In addition to basic functions such as static parking, static release, and automatic release, it also includes auxiliary functions like automatic parking and dynamic parking.
3
5
Share

Is the first maintenance for Volkswagen free?

Volkswagen's first maintenance is free. First maintenance considerations: You can get the free first maintenance at any authorized 4S dealership. Make sure to adhere to the specified time or mileage for the first maintenance. If unsure, it's best to consult your local 4S dealership to avoid missing the free service. Prepare the necessary documents, including the maintenance manual and vehicle license, and address any minor issues you've noticed during the inspection. Maintenance schedule: The maintenance interval is set at six months or 5,000 kilometers, whichever comes first. First maintenance: at 5,000 kilometers, only engine oil and oil filter replacement are required, along with a full vehicle inspection to check for leaks or similar issues. Second maintenance: at 10,000 kilometers, only engine oil and oil filter replacement are needed, along with cleaning the dust from the air filter and cabin air filter. Subsequent maintenance follows this pattern, with a major service typically required every 40,000 kilometers.
18
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.