What does the triangle exclamation mark in a car mean?

2 Answers
LaLucia
07/24/25 8:49am
Car triangle exclamation mark light indicates: 1. Transmission clutch overheating; 2. Fuel cut-off system intervention or malfunction; 3. Parking sensor failure; 4. Faulty exterior light bulb; 5. Engine oil pressure sensor malfunction; 6. Traction control system failure. Other indicator lights in a car include: tire pressure indicator, lighting fault indicator, steering system fault indicator, brake system warning light, transmission fault indicator, and windshield wiper fault indicator. When a dashboard warning light with an exclamation mark illuminates, it indicates an abnormality or malfunction in the corresponding part of the vehicle. This should not be taken lightly, and the source of the fault should be identified and addressed as soon as possible.
Was this review help?
20
3
Share
Jack
08/11/25 4:19am
When I first started driving, I got really nervous when I saw the triangle exclamation mark light up on the dashboard, thinking my car was about to fall apart. After consulting a car-savvy friend, I learned that this is the master warning light, indicating potential major issues. The most common cause is low tire pressure—a leak or slow puncture can trigger the yellow light. In such cases, pull over immediately and check the pressure using a tire gauge or the car's monitoring system. If it's below the standard, inflate the tires. Another frequent reason is brake system failure, like insufficient brake fluid or a faulty ABS sensor, which poses serious risks like brake failure or skidding accidents. I remember my neighbor ignored this light and nearly had a disaster on the highway. Sometimes, it could just be a burnt-out bulb or a stability system error, but it's never wise to take it lightly. For new drivers, the steps are simple: pull over safely, first check tire pressure and the indicator light descriptions in the user manual. If unsure, head straight to a repair shop to scan for trouble codes. Regular maintenance habits can prevent minor issues from escalating. In short, never push your luck when this light comes on—safety always comes first, and this is not something to delay.
Was this review help?
15
1
Share
Expand All
More Forum Discussions

Where is the car intake pipe located?

The car intake pipe is located in the engine compartment. After opening the engine hood, you can see the intake pipe, which is connected to the intake manifold. The intake pipe refers to the section of piping where air enters from the intake port, passes through the air filter, and reaches the front of each cylinder. It is the main intake pipeline of the engine and also the overall intake pipeline. Intake pipes can be divided into vertical intake manifolds and helical intake manifolds. Vertical intake manifolds have low intake resistance, which helps form resonance at high RPMs and improves intake efficiency, making them suitable for engines that emphasize high-RPM performance. Helical intake manifolds help generate vortices during intake, improving the mixing of air and gasoline, which enhances combustion efficiency at low RPMs, making them suitable for engines that emphasize low-RPM performance.
17
0
Share

What Does the Number of Cylinders in a Car Mean?

What Does the Number of Cylinders in a Car Mean? The number of cylinders in a car refers to the number of cylinders in the engine. Here is some information about cylinders: 1. A cylinder is a cylindrical chamber in the engine where a piston is driven by the pressure or expansion force of the working fluid. 2. For the same displacement, more valves generally result in better intake and exhaust efficiency. 3. Traditional engines typically have one intake valve and one exhaust valve per cylinder, which lowers manufacturing costs and makes maintenance relatively easier. Engines with larger displacement and higher power often use multi-valve technology. A simple multi-valve configuration is the three-valve structure, which adds an additional intake valve to the standard two-valve (one intake, one exhaust) setup.
1
5
Share

Does Water in the Fuel Tank Affect the Engine?

The impact of water in the fuel tank on the engine is as follows: 1. Water in the car's fuel tank can cause frequent stalling. Due to the presence of water, the tank may rust, corrode, or age. If there is moisture in the fuel system, it can lead to reduced engine power, increased fuel consumption, vehicle shaking, and difficulty starting in winter. Symptoms of water in the fuel tank include difficulty starting, engine backfiring, high idle speed, or insufficient power. 2. If water accidentally enters the fuel tank, the owner should stay calm, analyze the cause and extent of the water ingress. If the situation is mild, it can be resolved independently; if severe, professional repair at a specialized auto shop is recommended for better assurance. Since the fuel tank is the source of the car's power, any issues with it can make the vehicle difficult to operate.
17
5
Share

What to Do When the Brake Booster System Fails?

Here are the solutions for when the brake booster system fails: A restricted brake booster system refers to the failure of the brake booster system. The causes and solutions involve checking whether there is any air leakage in the vacuum pump or pipelines, and also inspecting whether the vacuum pressure sensor is malfunctioning. If a fault is detected, timely repairs are necessary to prevent accidents. Additional Information: The brake booster pump operates on the principle of the engine drawing in air during operation, creating a vacuum on one side of the booster. This creates a pressure difference compared to the normal air pressure on the other side, which is used to enhance braking thrust. Even if there is only a slight pressure difference across the diaphragm, due to the large surface area of the diaphragm, it can still generate significant thrust to push the diaphragm toward the side with lower pressure.
12
3
Share

What is the tire pressure for a 1.2t Corolla?

1.2t Corolla's normal tire pressure range is between 2.3~2.5 bar. Additional information is as follows: In winter, the tire pressure can be appropriately increased by about 0.2 bar based on the standard tire pressure. In summer, the tire pressure can be slightly lower than the standard by about 0.1 bar to avoid overinflation and potential blowouts due to high temperatures. Load conditions: When the vehicle is unloaded, use the lower limit of the standard tire pressure. When fully loaded, use the upper limit of the standard tire pressure. Tire pressure measurement environment: There is a difference between cold and hot tire pressures, with a difference of about 0.2 bar. If measuring hot tire pressure, subtract approximately 0.2 bar to get the cold inflation pressure. Road conditions: On rough roads, the tire pressure can be appropriately reduced by 0.1-0.2 bar from the standard. Tire condition: For new tires, increase the pressure by about 0.2 bar from the standard. For old tires, reduce the pressure appropriately, and for severely worn tires, use the lower limit of the standard. For comfort tires (soft tires), increase the pressure by about 0.2 bar from the standard. For performance tires (hard tires), use the lower limit of the standard. Spare tire pressure: Since spare tires are not frequently used, maintain a higher pressure (above 2.5 bar) to ensure readiness, adjusting to the appropriate pressure when in use, then reinflating to 2.5-3.0 bar.
19
3
Share

Where is the Bora's fuse box located?

The Bora's fuse box is located inside the instrument panel and the cabin of the vehicle. If any electrical equipment stops working during the use of the car, it may be due to a blown fuse. The fuse box is responsible for transmitting driving information to various parts of the vehicle body and is a key component in the car's electronic control system. Relevant information is introduced as follows: The Bora is a compact sedan under the Volkswagen brand, powered by the EA111 series 1.4TSI turbocharged engine. In terms of body dimensions, the Bora measures 4663mm in length, 1815mm in width, and 1462mm in height, with a wheelbase of 2688mm. It is a four-door, five-seater sedan.
3
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.