···
Log in / Register

What does the traffic violation code 12250 mean?

5 Answers
StDaniella
07/29/2025, 10:02 AM

The violation code 12250 means: engaging in other behaviors that hinder safe driving while operating a vehicle. According to Article 90 of the Road Traffic Safety Law, using a handheld phone while driving incurs a fine of 50 yuan and 2 penalty points; watching TV while driving incurs a fine of 50 yuan and 2 penalty points; engaging in other behaviors that hinder safe driving while operating a vehicle incurs a fine of 50 yuan and 2 penalty points. Article 62, Item 3 of the Regulations: While driving, one must not engage in behaviors that hinder safe driving, such as using handheld phones or watching TV. Traffic violation codes consist of four to five digits, classified according to the principles of the Road Traffic Law. The sequence from left to right is: the first digit represents the behavior classification code, the second digit represents the penalty point classification code, the third and fourth digits represent the sequential code, and the fifth digit represents the item number under the specific article. First digit: Behavior classification code, indicating the category under the Road Traffic Law. Second digit: Penalty point classification code, indicating the category of penalty points for the traffic violation. Third, fourth, and fifth digits: Sequential code, indicating the order of the behavior within the same behavior classification. For example: 13035—"1" indicates a motor vehicle behavior, the second digit "3" indicates 3 penalty points, and "035" indicates the fifth item under the third article in the 3-point penalty category. Explanation of behavior classification codes for violations: Codes starting with 1 indicate motor vehicle traffic, e.g., 1003. Codes starting with 2 indicate non-motor vehicle traffic, e.g., 2002. Codes starting with 3 indicate pedestrian or passenger traffic, e.g., 3030. Codes starting with 4 indicate highway traffic, e.g., 4002. Codes starting with 5 indicate other regulations, e.g., 5005. Codes starting with 7 indicate implementation rules of provinces, autonomous regions, or municipalities, e.g., 7008. Codes starting with 8 indicate local regulations of cities (prefectures, autonomous prefectures, or leagues), e.g., 8606. There are four common methods to query motor vehicle violations: Visit the office halls of traffic branches in various districts and counties to query through touch terminals. Log in to the external service websites of the Public Security Traffic Management Bureau of each city, find the vehicle violation query section, enter the license plate number and engine number, and click "Query." Mobile app query: Open the 12123 APP, log in, click "Motor Vehicle Violations" on the interface, enter the motor vehicle violation query section, click "Query," and the interface will display recent unprocessed violation records. Call the hotline (area code + 114) to query.

Was this review help?
5
1
Share
McAdrian
08/13/2025, 01:48 AM

Last time I got that ticket with code 12250, which is actually a pretty common violation—it means running a red light or disobeying traffic signals. I was in a hurry that day, saw the yellow light flashing, and hit the gas to rush through, only to get caught by the intersection camera, resulting in a 12250 violation. The fine was 200 yuan plus 6 points deducted, and dealing with it was quite a hassle—I had to make a trip to the traffic bureau or handle it via a mobile app. That experience taught me a lesson: never rush through traffic lights while driving; safety is far more important. Now when I approach intersections, I always slow down in advance, watch for signal changes, and make it a habit to drive cautiously. Here’s a tip: avoid distractions like constantly checking your phone—staying focused on driving can help prevent such unexpected issues.

Was this review help?
18
1
Share
Expand All
DeLevi
10/10/2025, 02:46 AM

When I first received the 12250 traffic violation notice, I was a bit confused. Later, after checking, I realized it refers to a motor vehicle violating traffic signal instructions, commonly known as running a red light. As a new driver, I might have made this mistake at an intersection due to lack of experience or impatience. This violation usually comes with a fine of 200 yuan and 6 penalty points, which is quite severe. It's important to pay the fine as soon as possible to avoid additional late fees. From a personal perspective, safe driving should never be taken lightly, and more practice in observing traffic light systems is necessary. While driving, I remind myself to stay calm and not let other things distract me, such as loud music that might make me miss a signal.

Was this review help?
9
5
Share
Expand All
VonAdriel
11/23/2025, 02:57 AM

People frequently dealing with vehicles and accidents, I'm very clear about code 12250, which represents running a red light violation. Simply put, it means driving against traffic signal instructions. This mistake commonly occurs due to distraction at intersections or speeding. The risks are significant, ranging from a 200-yuan fine and 6-point deduction to potentially causing accidents. As someone who regularly observes traffic conditions, I recommend frequently checking your vehicle's brake responsiveness and reaction time. Driving habits are crucial – avoid fatigued driving.

Was this review help?
20
2
Share
Expand All
LeEmma
01/13/2026, 09:41 PM

Violation code 12250 essentially refers to a motor vehicle failing to obey traffic signal instructions, such as running a red light. This stems from traffic regulations aimed at ensuring intersection safety. Many people commit this violation due to rushing, like accelerating to beat a yellow light turning red. The penalty is a 200-yuan fine and 6 demerit points, which should be handled promptly. From a rules perspective, preventive measures include slowing down in advance and learning traffic light patterns. Driving should not prioritize speed; respecting signals can prevent violations. Additional advice: Use map apps to choose routes that avoid congested areas, reducing impatient tendencies.

Was this review help?
13
3
Share
Expand All
More Forum Discussions

Which gear should be used when climbing a slope with Nissan Qashqai?

Here is the relevant introduction about climbing slopes with Qashqai: 1. Use the S gear when climbing a slope with Qashqai, and you can switch back to D gear after completing the action. 2. The S gear provides stronger power and is generally used when overtaking or climbing slopes. Below is some relevant information about Qashqai: 1. The Qashqai is a compact SUV under Dongfeng Nissan. The vehicle has a length, width, and height of 4401mm, 1837mm, and 1593mm respectively, with a wheelbase of 2646mm. It is a 5-door, 5-seat SUV with a CVT continuously variable transmission (simulating 7 gears). 2. The Qashqai features front-wheel drive, with a front suspension type of MacPherson independent suspension and a rear suspension type of multi-link independent suspension. The steering assistance type is electric power steering.
10
4
Share

How to Deal with Audi A4L Burning Engine Oil?

Here are the solutions for Audi A4L burning engine oil: 1. Replace with higher quality engine oil. 2. Clean carbon deposits and sludge from the engine. 3. Replace with a smoother-flowing oil filter. Below is some relevant information about burning engine oil: 1. Burning engine oil refers to the situation where engine oil enters the combustion chamber of the engine and participates in combustion along with the air-fuel mixture. 2. The phenomenon of burning engine oil can cause the vehicle's oxygen sensor to fail prematurely, leading to increased carbon deposits in the combustion chamber, unstable idling, lack of acceleration power, and excessive exhaust emissions, among other adverse effects. 3. In terms of power, the Audi A4L is equipped with a turbocharged engine, delivering a maximum horsepower of 150 hp, a maximum torque of 270 Nm, and a maximum power output of 110 kW.
5
1
Share

What should I pay attention to when choosing a driving school?

When choosing a driving school, you need to pay attention to the following points: 1. Is the driving school legitimate: When choosing a driving school, you must investigate in advance. There are usually two to three hundred driving schools in each region, but very few of them are truly qualified. When selecting a driving school, first check whether it has a business license, operation permit, etc. 2. Does it have its own test site: Choosing a driving school with its own test site has a significant impact on later exams and obtaining the license. Generally, driving schools with their own test sites have higher pass rates. If you are unsure how to check whether the driving school you are consulting has a test site, you can log in to the exam booking system, where all test sites in each region are listed. 3. The training scale of the driving school: The training scale of a driving school can reflect its investment status. To some extent, the size of a driving school represents its strength and can also objectively estimate how many trainees it can accommodate each month. 4. Registration fees: When choosing a driving school, consider the actual situation comprehensively. Do not be attracted by low registration fees. Consult several schools and make sure to clarify all details in advance to avoid being deceived after registration.
3
0
Share

How often should a 7-seater MPV be inspected?

7-seater MPVs fall under the category of small passenger vehicles, and their inspection frequency should be determined based on the vehicle's age: 1. For non-commercial small and micro passenger vehicles (including 7-seaters) within the first 6 years: exempt from annual inspection. 2. After exceeding 6 years: For vehicles aged between 6-10 years, only 2 on-site inspections are required (in the 6th and 8th year respectively). For vehicles over 10 years old: annual inspection is required. For vehicles over 15 years old: semi-annual inspection is required. Additional information about MPVs: 1. Introduction: MPV (Multi-Purpose Vehicle) evolved from station wagons, combining the spaciousness of wagons, comfort of sedans, and functionality of vans. Typically featuring a two-box design, they can accommodate 7-8 passengers. 2. Structural basis: Most MPVs use car platforms with transverse front-mounted engines and monocoque body design. The cabin features flexible seating arrangements where all or partial seats can be folded down. MPV body designs often incorporate low-drag aerodynamic styling elements from racing cars.
7
1
Share

Will the Steering Wheel Screw Loosen?

There is no screw; the steering wheel has one fixing screw in the very center, under the airbag. Reasons for a loose steering wheel: Severe wear of the steering gear and tie rod end; clearance caused by wear of the steering universal joint; the horn button area of the steering wheel has a gear-shaped shaft, and the grooves on the gear-shaped shaft are also worn out; whether there is any clearance in the steering ball joint; steering system malfunction. Steering Wheel: The earliest cars used a tiller to control driving. This transmitted the intense vibrations generated during driving to the driver, making it more difficult to control the direction. When the engine was relocated to the front of the vehicle, the increased weight made it impossible for the driver to continue using the tiller. The new design of the steering wheel emerged, introducing a gear system between the driver and the wheels that was flexible to operate and effectively isolated the intense vibrations from the road. Moreover, a good steering wheel system can provide the driver with a sense of intimate connection with the road.
11
1
Share

What is the fuel consumption of the Accord?

Honda Accord fuel consumption: The 230TURBO version has a fuel consumption of 6.4L/100km, while the 260TURBO version consumes 6.0L/100km. The fuel consumption per 100 kilometers is a theoretical indicator value provided by the manufacturer, measured under objective conditions using a dynamometer installed on the vehicle's chassis, converted into speed parameters, and then calculated through specified speed driving to determine the theoretical experimental fuel consumption data for the model. Other classifications of vehicle fuel consumption are as follows: 1. Road condition fuel consumption: This refers to the fuel index calculated by repeatedly testing the vehicle driving at specified speeds and times on designated roads, also known as multi-condition road cycle fuel consumption. 2. Hourly fuel consumption: If the engine speed is controlled within the same safe range, regardless of the vehicle's speed, the hourly fuel consumption remains the same. This method is more accurate for calculating fuel consumption on highways and in engineering transport, where the first two methods are not suitable. The formula for hourly fuel consumption is: fuel consumption per 100 kilometers / 100 * limit speed * 0.8 (the limit speed is the highest safe speed).
4
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.