What does the traffic violation code 10190 mean?

2 Answers
NatalieDella
07/24/25 2:30am
The violation code 10190 means: Motor vehicles use the dedicated lane in violation of regulations. According to the relevant provisions of the "Road Traffic Safety Law of the People's Republic of China", the penalty is: Demerit points (deduction): 0 points; Fine amount: 100 yuan; Other penalties: Warning. Traffic violation codes consist of four to five digits, classified according to the principles of the traffic law. The order from left to right is: the first digit represents the behavior classification code, the second digit represents the demerit point classification code, the third and fourth digits are the sequence code, and the fifth digit represents the item number. First digit: Behavior classification code, indicating the classification code in the Road Traffic Law; Second digit: Demerit point classification code, indicating the classification code for traffic violation demerit points; Third, fourth, and fifth digits: Sequence code, indicating the sequence code of the behavior within the same behavior classification. For example: 13035—"1" indicates motor vehicle behavior, the second digit "3" indicates a deduction of 3 points, and the following "035" indicates the fifth item of the third behavior in the 3-point deduction category. Behavior classification code violation descriptions: Codes starting with "1" indicate motor vehicle traffic, e.g., 1003. Codes starting with "2" indicate non-motor vehicle traffic, e.g., 2002. Codes starting with "3" indicate pedestrian or passenger traffic, e.g., 3030. Codes starting with "4" indicate highway traffic, e.g., 4002. Codes starting with "5" indicate other regulations, e.g., 5005. Codes starting with "7" indicate implementation rules of provinces, autonomous regions, or municipalities directly under the central government, e.g., 7008. Codes starting with "8" indicate local regulations of cities (regions, autonomous prefectures, or leagues), e.g., 8606. There are four common methods to check motor vehicle violations: Visit the office halls of traffic branches in various cities, districts, or counties and use the touch query terminals; Log in to the external service websites of the public security traffic management bureaus of various cities, find the vehicle violation query section, enter the license plate number and vehicle engine number, and click "Query"; Call the hotline (area code + 114) to inquire; Use the Traffic Management 12123 app (V2.8.1B437 for iOS 15+ or V2.8.1B274 for Android 12+) to check. For the violation of motor vehicles using dedicated lanes in violation of regulations, you can handle it through the Traffic Management 12123 app. After logging in, enter the violation processing business process, complete the handling, and make the payment.
Was this review help?
6
4
Share
Marques
08/10/25 10:09pm
Traffic violation code 10190 means driving a motor vehicle in violation of the instructions of a prohibition sign. I remember encountering this situation last year when I made a left turn at an intersection with a clearly marked 'No Left Turn' sign and was caught by an electronic eye, resulting in a 200 yuan fine and 3 demerit points. This type of violation often occurs in city centers or busy road sections, such as mistakenly entering a one-way street or parking in a no-entry zone. The reasons could be distractions like looking at a phone, failing to notice road signs clearly, or the navigation app not providing timely reminders. To avoid this, drivers should pay more attention to road signs, especially on unfamiliar routes, and it's advisable to use apps like Traffic Management 12123 to monitor violation risks in real-time. Regularly reviewing the traffic rules handbook is also helpful. If fined, it's best not to delay and to settle the matter promptly.
Was this review help?
12
0
Share
Expand All
More Forum Discussions

How to Handle Two Flat Tires?

Turn on the hazard lights, stay focused, hold the steering wheel firmly with both hands, and gently apply the brakes to gradually reduce the vehicle's speed while keeping the car straight. Once the speed has safely decreased, check the rear traffic and, if safe, move into the emergency stopping lane and call for roadside assistance.
14
3
Share

What are the differences between Volkswagen Passat and Volkswagen Magotan?

Differences between Volkswagen Passat and Volkswagen Magotan: 1. Different manufacturers: Volkswagen Passat belongs to SAIC Volkswagen; Volkswagen Magotan belongs to FAW-Volkswagen. 2. Different models: The prototype of Volkswagen Passat is the American version of Passat; the prototype of Volkswagen Magotan is the European version of Passat. Both cars are equipped with the same powertrain, which includes a 1.4T turbocharged engine and a 2.0T turbocharged engine with high and low power outputs, paired with a 7-speed dual-clutch transmission. Volkswagen Magotan originates from Future B6, which is closely related to Passat B6, and is also a B-segment sedan produced and sold by FAW-Volkswagen since its establishment. Passat is a mid-size sedan designed by Volkswagen AG in Germany, classified as a B-segment car in the Volkswagen lineup.
4
3
Share

Is it suitable for a new car to run on the highway?

It is best to drive on the highway after the break-in period for a new car. During the break-in period, the engine speed should be controlled at around 2500 RPM, and it is not advisable to stay in one gear for a long time. Change the speed and gear every few minutes to allow the gears of each gear to be properly run-in and reduce excessive wear on a particular gear. The methods to identify whether it is a new car are as follows: 1. Check the manufacturing date: The manufacturing date of the vehicle should match the certificate of conformity, and it is generally not easy to alter. If the manufacturing date exceeds 15 days, then it is an old car. 2. Check the brake disc: After driving more than 200 kilometers, the brake pads usually leave obvious marks on the brake disc. Generally, there is a distance of 1 to 2 millimeters between the brake pads and the outer edge of the brake disc.
8
2
Share

Why Do You Need to Press the Clutch When Shifting Gears?

Because shifting gears without pressing the clutch has a high probability of damaging the transmission gears. Here are the relevant explanations: 1. Gear Shifting Basics: Manual transmission vehicles require pressing the clutch when shifting gears because during gear changes, the engine output shaft needs to engage with the next gear's teeth in the transmission. If the engine output shaft is not disconnected from the transmission input shaft during shifting, the transition between the two sets of gears cannot be completed, and the gear lever naturally cannot be moved into the next position. Forcing a gear shift may break the gear lever and damage the gears in the transmission. 2. Clutch: The clutch is located inside the flywheel housing between the engine and the transmission. The clutch assembly is fixed to the rear plane of the flywheel with screws, and the output shaft of the clutch is the input shaft of the transmission.
8
2
Share

Why Can't Beginners Handle the Kawasaki H2?

Because the Kawasaki H2's engine horsepower and power output are too high, its speed can increase dramatically in an instant, making it generally unsuitable for beginners. Below is an introduction to the Kawasaki H2 motorcycle: 1. Power Specifications: The Kawasaki H2 is equipped with a 998cc four-stroke inline four-cylinder engine, with an actual displacement of 998cc. It can achieve a maximum horsepower of 210ps and a maximum power output of 154KW. 2. Supercharger Blade: The supercharger blade of the Kawasaki H2 is crafted from a single piece of forged aluminum using 5-axis CNC machining, with a diameter of only 69mm. The impeller consists of six large and six small blades. The base is intentionally designed with fine grooves to facilitate airflow. Under atmospheric pressure, when the air velocity in the intake pipe reaches 100 meters per second, the supercharger blade can deliver 200 liters of air per second, achieving a boosted air pressure of up to 2.4 times after supercharging.
14
3
Share

How to Turn On Continuous Wiper Mode?

Push the lever upward, and the wipers will start operating in continuous mode. Release the lever, and it will automatically return to its original position, stopping the wipers. Automatic intermittent operation. Pull the lever down one notch, and the wipers will start working automatically in intermittent mode. Continuous operation. Pull the lever down another notch, and the wipers will operate continuously at an automatic rate. Continuous high-speed operation. Pull the lever all the way down, and the wipers will operate at high speed.
17
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.