What does the Traffic Management 123 one-click vehicle moving service mean?

What is the spark plug model for the Classic Focus?

The spark plug model for the Classic Focus is TR6F13, and the Q6RTP13 model can also be used. For Denso's iridium spark plugs, the IT205326 model can be used. For Bosch's platinum-iridium spark plugs, the HGR6DQI model can be used. The Classic Focus is a 5-door, 5-seat compact hatchback under Changan Ford. The vehicle has a length of 4342 mm, a width of 1840 mm, a height of 1500 mm, and a wheelbase of 2640 mm. In terms of power, the Classic Focus is equipped with a naturally aspirated engine with a maximum horsepower of 124 hp, a maximum torque of 161 Nm, and a maximum power of 91 kW.

9

2

Share

What needs to be done after the C1 probation period expires?

C1 driver's license does not require any action after the probation period expires. You only need to renew it within 90 days before the six-year validity period ends. The driving scope of a C1 driver's license includes small and micro passenger vehicles, light and micro cargo vehicles; light, small, and micro special-purpose vehicles; and small passenger vehicles with a seating capacity of 9 or fewer people. C1 driver's license holders cannot drive: large buses, tractors, city buses, medium-sized buses, large trucks, ordinary three-wheeled motorcycles, ordinary two-wheeled motorcycles, light motorcycles, wheeled self-propelled machinery, trolleybuses, and trams. Additionally, C1 license holders cannot drive vehicles with more than 9 seats or trucks with a total length exceeding 6 meters. Age requirements: The minimum age limit for a C1 driver's license is 18 years old, and there is no upper age limit. However, applicants aged 70 or older must pass tests for memory, judgment, and reaction abilities.

6

2

Share

Why Is It a Disadvantage to Inspect Your Vehicle Three Months in Advance?

Inspecting your vehicle in advance is not a disadvantage. According to relevant regulations, motor vehicles must apply for an inspection compliance mark at the vehicle registration office within three months before the expiration of the validity period. The annual inspection time is based on the date on the vehicle license, and the validity period of an early inspection will not change. Below are the precautions for vehicles that have not undergone annual inspection: 1. Accident Liability: For any traffic accident caused by a vehicle that has not undergone the annual inspection on time, the party involved will bear full or primary responsibility, and the insurance company will not be liable. This is because the insurance policy specifies that vehicles with expired inspections are among those excluded from compensation. 2. Mandatory Scrapping: According to the "Mandatory Scrapping Standards for Motor Vehicles," any motor vehicle that fails to obtain an inspection compliance mark for three consecutive inspection cycles after the expiration of the inspection validity period will be mandatorily scrapped.

15

4

Share

Does engine oil have an expiration date?

Engine oil does have an expiration date. Generally, the shelf life of engine oil (fully synthetic, semi-synthetic, mineral oil) is 4-5 years. Below is more information about engine oil: 1. Mineral oil: Mineral oil is the residual oil left after refining gasoline and heavy oil from petroleum. Although it is a natural oil, it contains more impurities. It is cheaper compared to semi-synthetic and fully synthetic oils but offers poorer lubrication for the engine and has a shorter service life. 2. Semi-synthetic oil: Semi-synthetic oil is a middle ground between mineral oil and fully synthetic oil. It contains a large amount of anti-corrosion additives to improve the oil's stability and high oxidation resistance. 3. Fully synthetic oil: Among the three types, fully synthetic oil is of the highest quality and durability, and it is also the most expensive. Typically, it can last for 10,000-12,000 kilometers in a car without deteriorating. 4. Hazards of water contamination in engine oil: If a small amount of water enters the engine and mixes with the oil, the oil quality deteriorates. Oil containing water can increase wear on engine components, potentially leading to increased engine noise and vibration during future vehicle operation.

1

3

Share

What does braking distance mean for a car?

Braking distance is one of the key parameters to measure the braking performance of a vehicle. It refers to the distance traveled by the vehicle from the moment braking begins until the car comes to a complete stop, while the vehicle is moving at a certain speed. It is the distance covered by the car from the moment the driver presses the brake pedal sharply until the car comes to a full stop, starting from a certain initial speed. The magnitude of the braking force not only depends on the travel distance of the brake pedal being pressed but also on the adhesion coefficient between the wheels and the ground. The smoother the road (such as an icy surface), the smaller the adhesion coefficient, and the longer the braking distance. Below is an introduction to brake pedal operation: Introduction to brake pedal operation: Car brake pedal operations are divided into slow braking (i.e., anticipatory braking), emergency braking, combined braking, and intermittent braking. Generally, during slow braking and emergency braking, before the wheels lock up and the car stops, the clutch pedal should be fully depressed to prevent the engine from stalling and to facilitate changing speeds again. It is important to properly control the timing and force of braking: Generally, do not use the method of pressing the brake pedal all the way down in one go. First, press the brake pedal, and determine the foot pressure (i.e., the increase in pressure) as needed. When the speed is fast, the foot pressure should be quick and forceful; when the speed is slow, the foot pressure should be gentle and steady. Then, based on various situations, different increases or decreases in pressure should be applied.

13

1

Share

What documents are required for motorcycles to access highways?

Motorcycles require a driver's license to access highways. Below is some information about the C1 driver's license: 1. C1 License Regulations: Driving an electric tricycle with a C1 license is considered a mismatch of the permitted vehicle type. Driving a motor vehicle that does not match the permitted vehicle type is penalized as driving without a license, with fines and possible detention of up to 15 days. According to the 'Regulations on the Application and Use of Motor Vehicle Driving Licenses,' driving a vehicle that does not match the permitted vehicle type results in a 12-point deduction. 2. Introduction to C-Class Licenses: The C1 license for small cars allows driving manual or automatic transmission vehicles with up to 9 seats (including 9 seats), small and micro passenger vehicles, light and micro cargo vehicles (all small trucks with blue license plates), light, small, and micro special operation vehicles, and small automatic transmission cars (C2). It also permits driving low-speed cargo vehicles (C3), three-wheeled cars (C4), and ordinary three-wheeled motorcycles (D license). The D license allows driving three-wheeled motorcycles with an engine displacement greater than 50ml or a maximum design speed greater than 50km/h, as well as E and F class vehicles.

19

1

Share

What does the Traffic Management 123 one-click vehicle moving service mean?

What is the spark plug model for the Classic Focus?

What needs to be done after the C1 probation period expires?

Why Is It a Disadvantage to Inspect Your Vehicle Three Months in Advance?

Does engine oil have an expiration date?

What does braking distance mean for a car?

What documents are required for motorcycles to access highways?

What car has the V logo?

What Causes Water Dripping Under the Car?

What brand is headking tire?

Is the Highlander purely imported or domestically produced?