What does the torque converter oil pressure gauge refer to?

1 Answers
SanMelanie
07/30/25 2:53am
The oil pressure gauge for the torque converter of a loader is generally a direct-reading gauge. The data reflected by the needle indicates the pressure of the transmission oil used for gear shifting in the transmission. During each normal gear shift, the pressure undergoes a standard variation process from high to low and then back to high. If the needle exhibits severe shaking during normal operation without affecting regular gear shifting and driving, it is primarily due to insufficient oil in the transmission or a decline in the quality of the transmission oil. Additional information: The torque converter of a loader is filled with hydraulic transmission oil. Hydraulic transmission oil is essentially a high-quality hydraulic fluid, featuring a higher viscosity index, superior thermal-oxidative stability, enhanced anti-wear properties, and higher cleanliness.
Was this review help?
14
4
Share
More Forum Discussions

What are the reasons for the Honda CRV window not rolling up properly?

The reasons for the Honda CRV window not rolling up properly are: 1. Aging or deformation of the glass seal; 2. Dirty window lift guide rails; 3. Malfunction of the window lift guide rails. The solutions are: 1. Spray some dashboard wax on the glass seal or apply talcum powder; 2. Clean the window lift guide rails; 3. Replace the window regulator. The Honda CRV is a classic urban SUV model produced by Dongfeng Honda, with dimensions of 4550mm in length, 1820mm in width, and 1685mm in height, and a wheelbase of 2620mm. The vehicle is equipped with SRS dual airbags, door beams, front and rear 3-point ELR seat belts, seat belt reminders, and a seat safety system with pre-tensioners and load limiters.
10
0
Share

How to Shift from S Gear to D Gear?

D gear and S gear can be switched regardless of vehicle speed or road conditions. To shift to S gear, simply push the gear lever to the S position. More details about S gear are as follows: 1. S stands for Sport mode, which is a high-rev gear that delays upshifts and initiates early downshifts. It provides better vehicle power, making it suitable for climbing slopes or overtaking when extra power is needed. Switching between S and D can generally be done at any time, but it is advised not to shift from D to S when the vehicle speed or engine RPM is high. 2. Shifting from S gear to D gear does not require pressing the brake, and the same applies when shifting from D to S. In automatic transmission models, S gear and D gear are essentially the same gear position and use the same shifting mechanism. The difference lies in the tuning of the engine and throttle, as well as the timing of gear shifts by the transmission, allowing drivers to experience different driving modes.
20
0
Share

What are the octane ratings of 92 and 95 gasoline?

92 gasoline contains 92% isooctane and 8% n-heptane, while 95 gasoline contains 95% isooctane and 5% n-heptane. Relevant information about gasoline grades is as follows: 1. The gasoline grade represents the fuel's anti-knock performance. The higher the grade, the better the anti-knock performance. It is worth noting that the gasoline grade has little to do with the quality of the gasoline itself. A higher grade does not mean the gasoline is better, nor does it indicate fewer impurities or higher purity. 2. Anti-knock performance refers to the ability of gasoline to resist knocking when burning in the engine. It is the primary indicator of gasoline's combustion performance. Knocking is caused by abnormal combustion of gasoline in the engine. The octane rating is the measure of gasoline's anti-knock performance; the higher the octane rating, the stronger the anti-knock performance.
18
4
Share

What Does the Coolant Warning Light Look Like?

The coolant warning light appears as a flashing alert light. Introduction to Coolant: The full name of coolant should be antifreeze coolant, meaning it is a cooling liquid with antifreeze functionality. Coolant prevents the freezing of the liquid during cold winter stops, which could otherwise cause the radiator to crack or damage the engine cylinder block or cylinder head. Functions of Coolant: It provides anti-corrosion protection for components of the cooling system; prevents scale formation, avoiding a reduction in the radiator's cooling efficiency; ensures the engine operates within the normal temperature range. Coolant Replacement Cycle: Coolant is typically replaced every two years or 40,000 kilometers. However, this is not an absolute rule. The actual condition should be assessed to determine the need for replacement, as it may remain functional for several tens of thousands of kilometers or over a year or two without major issues. Additionally, it is important to note that different types of antifreeze should not be mixed.
18
3
Share

Can You Directly Add Oil When the Engine Is Low on Oil?

You can directly add oil when the engine is low on oil. Below are the relevant details: 1. The steps for adding oil are: (1) Open the engine hood. (2) Locate the oil filler port. (3) Add oil and check the oil level or for any leaks. 2. The functions of engine oil include: lubrication, auxiliary cooling, cleaning, sealing to prevent leaks, rust and corrosion prevention, shock absorption, and wear resistance. 3. The method for changing the oil is: (1) Lift the car, remove the protective plate, and place a container of about 10 liters under the oil drain plug. (2) Unscrew the oil drain plug, use an air gun to blow for two minutes at the oil filler port, and after draining, tighten the oil drain plug and wipe it with a paper towel to check for leaks. (3) Reinstall the protective plate and lower the car, then use a funnel to add oil through the filler port.
14
1
Share

Does the Vehicle License Contain the VIN?

The vehicle license does contain the VIN (Vehicle Identification Number), which is a 17-character alphanumeric code serving as the car's unique identifier. This code can also be found in the engine compartment. Below is more information about the VIN: 1. The VIN, or Vehicle Identification Code, is a 17-digit alphanumeric combination that ensures no two vehicles of the same model are identical within 30 years, functioning as the car's unique ID, much like a human's ID card. 2. The last six digits of the VIN can be used to query detailed vehicle information. 3. The 17-character VIN is typically divided into six sections: Characters 1-3 represent the manufacturer, brand, and type; Characters 4-8 (or 4-9 in European standards) indicate vehicle characteristics. China follows the U.S. standard, using positions 4-8 for these features.
8
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.