What does the tire pressure monitoring 'set' mean?

1 Answers
PhoebeDella
07/29/25 9:51pm
The tire pressure monitoring 'set' refers to the tire pressure warning, which requires storing the tire pressure. The 'set' light is a tire pressure monitoring indicator. Once it illuminates, it indicates that at least one of the vehicle's four tires is below the standard pressure value, indicating an underinflated state. Tire pressure refers to the air pressure inside the tire. Hazards of abnormal tire pressure: 1. Increased friction coefficient with the road surface, leading to higher fuel consumption; 2. Creates unsafe factors such as heavy steering and tendency to veer; 3. Increases the movement of various parts of the tire, causing abnormal heating due to excessive rolling; 4. Multiplies the friction between the tire and the ground, increasing the risk of a blowout.
Was this review help?
15
0
Share
More Forum Discussions

What does the used car migration restriction mean?

The used car migration restriction means that some vehicles from other regions with excessively low emission standards are not allowed to be relocated to the local area. The so-called "migration restriction" refers to measures taken by some localities to limit the environmental standards or the age of used motor vehicles from other provinces or cities, in order to prevent a large influx of these vehicles into the local market. Below is additional information: Relevant regulations: In March 2016, the State Council issued the "Several Opinions on Promoting the Convenient Trading of Used Cars," requiring that, apart from 15 cities in the three major regions of Beijing-Tianjin-Hebei, Jiangsu-Zhejiang-Shanghai, and the Yangtze River Delta, the other 299 prefecture-level cities across the country must not establish policies restricting the migration of used cars. Areas that had already implemented migration restrictions were required to cancel them by the end of May 2016.
18
2
Share

When Should the Position Lights Be Turned On?

Position lights should be turned on in low visibility conditions or when it is not completely dark yet. They are installed at the top edges of the headlights and are also known as clearance lights. Their function is to indicate the presence and approximate width of the vehicle, making it easier for other vehicles to judge during overtaking or when meeting on the road. The types and functions of car lights include: 1. Brake lights: To warn people or vehicles behind; 2. Turn signals: To alert vehicles and pedestrians in front, behind, and on the sides; 3. License plate lights: To illuminate the vehicle's license plate at night; 4. High beams: To check distant road conditions; 5. Low beams: To clearly see the road conditions in front of the vehicle; 6. Fog lights: Strong penetration in fog, making it easier for vehicles and pedestrians to notice early.
1
2
Share

What are the speed limits for three-lane highways?

On a three-lane highway, the leftmost lane is the overtaking lane with a speed limit of 110-120 km/h. The middle and rightmost lanes are driving lanes with speed limits of 90-110 km/h and 60-90 km/h respectively. Methods for driving on three-lane highways: 1. On a same-direction three-lane highway, the minimum speed for the leftmost lane is 110 km/h, the middle lane is 90 km/h, and the rightmost lane is 60 km/h. 2. According to Article 78 of the 'Implementation Regulations of the Road Traffic Safety Law of the People's Republic of China', highways must indicate lane speed limits, with maximum speeds not exceeding 120 km/h and minimum speeds not below 60 km/h. 3. On highways, the maximum speed for small passenger vehicles must not exceed 120 km/h, other motor vehicles must not exceed 100 km/h, and motorcycles must not exceed 80 km/h.
7
4
Share

What is the 0-100 km/h acceleration time of the Qiantu K50?

The 0-100 km/h acceleration time of the Qiantu K50 is 4.6 seconds. Additional information is as follows: Factors affecting the 0-100 km/h acceleration time: There are many factors that affect a car's 0-100 km/h acceleration time, such as tires, temperature, road surface, wind direction, etc. If certain conditions are not optimal, the tested 0-100 km/h acceleration performance may be relatively poor. Basic introduction to the Qiantu K50: The Qiantu K50 is the first pure electric sports car launched by Qiantu Motors, a subsidiary of CH-AUTO Technology. The dimensions of the Qiantu K50 are 4634mm in length, 2069mm in width, and 1253mm in height, with a wheelbase of 2650mm. It is powered by two electric motors, positioned on the front and rear axles respectively, achieving all-wheel drive.
10
5
Share

What does the range on the car dashboard mean?

The range on the car dashboard refers to the estimated distance the vehicle can travel at an economical speed with the remaining fuel in the tank. This figure is calculated by the car's instruments based on certain standards and algorithms. To check the car's range, simply look at the odometer on the dashboard, which is marked as 'odo' and displays the value followed by the unit 'km'. Its purpose is to inform the driver of the distance traveled. The method to reset the car's range is: 1. Press the black button next to the vehicle's dashboard; 2. Remove the dashboard and its internal components, then use a tool to adjust the mileage gear. The car's mileage is calculated based on the number of rotations of the tires, with the computation performed by sensors and the car's computer, and then displayed on the odometer.
11
3
Share

What are the consequences of removing the catalytic converter?

The consequences of removing the catalytic converter are as follows: 1. The exhaust purification function is reduced, leading to excessive exhaust emissions, increased exhaust back pressure, higher fuel consumption, and decreased power: High-temperature sintering blockages will cause emissions to fail to meet standards, polluting the environment. Vehicles equipped with oxygen sensors will report faults. Unless the catalytic converter is blocked, removing it may improve power, but if the original converter is intact, there will be no significant power improvement. 2. The catalytic converter transforms harmful gases into harmless substances, so removing it is equivalent to emitting polluted gases. The catalytic converter is installed in the exhaust pipe and resembles a muffler in shape. Its outer shell is made of double-layer stainless steel plates, with an insulating material—asbestos fiber felt—sandwiched in between. Inside the steel shell is a high-temperature-resistant ceramic substrate with densely packed honeycomb-shaped small holes longitudinally.
18
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.