What does the Tiggo 8 cornering light mean?

1 Answers
MacCamille
07/30/25 9:11am
Cornering light means that when the car is turning, the light will illuminate in the direction of the turn, usually by activating the fog light on the turning side. High-end headlights will also turn. Below are the specific details about cornering lights: 1. Function: Cornering light refers to a separate set of bulbs (some vehicles use fog lights as cornering lights) that illuminate on one side when the driver turns the steering wheel, helping to light up the blind spot in the curve. Once the steering wheel is straightened, the single-side cornering light will turn off. 2. Bulb form: Generally, cornering lights are in the form of independent bulbs and are placed inside the headlight housing. Compared to adaptive headlights, cornering lights are less expensive but not as effective in illuminating blind spots.
Was this review help?
7
5
Share
More Forum Discussions

What are the differences between the Qashqai and the Kicks?

The differences between the Qashqai and the Kicks are as follows: 1. Different engine displacements: The Qashqai offers three displacement options, namely 1.2T, 1.6L, and 2.0L, while the Kicks only has a 1.5L displacement. 2. Different drive modes: The Qashqai features front-wheel drive and front four-wheel drive, whereas the Kicks only has front-wheel drive. 3. Different body structures: The Qashqai has a longer wheelbase and larger trunk capacity compared to the Kicks, and it uses a multi-link independent suspension. The Kicks employs a torsion beam non-independent suspension. 4. Different model options: The Qashqai offers 52 model variants to choose from, while the Kicks only has 18. 5. Different vehicle classes: The Qashqai is classified as a compact SUV, whereas the Kicks is categorized as a small SUV.
20
5
Share

Why does the Audi Q3 fan keep running even when the water temperature is not high?

Audi Q3 fan keeps running even when the water temperature is not high, which is a normal situation. The following is a related introduction to car air conditioning: 1. Air conditioning layout: Different types of air conditioning systems have different layout methods. Currently, integrated heating and cooling air conditioning systems are widely used in passenger cars. The layout form involves assembling the evaporator, heater radiator, centrifugal blower, control mechanism, etc., together, which is called the air conditioning unit assembly. 2. Air conditioning composition: Modern air conditioning systems consist of refrigeration systems, heating systems, ventilation and air purification devices, and control systems. Car air conditioning generally mainly consists of a compressor, an electronically controlled clutch, a condenser, an evaporator, an expansion valve, a receiver-drier, pipelines, a condenser fan, a vacuum solenoid valve, an idle speed device, and a control system. Car air conditioning is divided into high-pressure pipelines and low-pressure pipelines. The high-pressure side includes the compressor output side, high-pressure pipelines, the condenser, the receiver-drier, and the liquid pipeline; the low-pressure side includes the evaporator, accumulator, return pipeline, compressor input side, and compressor oil sump.
3
5
Share

What car is the MG logo?

MG logo represents the British car brand MG (Morris Garages), and its models include: MG HB, MG HS, MG ZS, MG EHS, MG 6 New Energy, and the pure electric MG EZS. Taking the 2020 MG 6 as an example, its body dimensions are: length 4704mm, width 1848mm, height 1466mm, with a wheelbase of 2715mm. The 2020 MG 6 features a MacPherson strut front suspension and a multi-link independent rear suspension. It is equipped with a 1.5T turbocharged engine, delivering a maximum horsepower of 181PS, maximum power of 133kW, and maximum torque of 285Nm, paired with a 6-speed manual transmission.
3
5
Share

What are the causes of driveshaft imbalance?

The causes of driveshaft imbalance are: 1. The balance weights on the driveshaft have fallen off; 2. The driveshaft is bent or the driveshaft tube is dented; 3. The driveshaft tube and universal joint are not properly welded, or the driveshaft has not undergone dynamic balance testing and calibration; 4. The sliding yoke is misaligned during installation, causing the universal joint yokes at both ends of the driveshaft to not be in the same plane, failing to meet the constant velocity transmission condition. The symptom of driveshaft imbalance is that when the universal joint yoke and sliding yoke are in good technical condition, the vehicle emits a periodic noise during driving, with the noise increasing as the speed rises, and may even be accompanied by body vibration, causing numbness when holding the steering wheel.
17
0
Share

What are the methods to retrieve a locked Chevy car key inside the vehicle?

Methods to retrieve a locked Chevy car key inside the vehicle are: 1. Use a spare key; 2. Call a professional locksmith; 3. Break the window in emergency situations. Taking the 2018 Chevrolet Cruze Dual-Clutch Xuanfeng Edition as an example, its body dimensions are: length 4666mm, width 1807mm, height 1460mm, with a wheelbase of 2700mm and a fuel tank capacity of 52 liters. The 2018 Chevrolet Cruze Dual-Clutch Xuanfeng Edition is equipped with a 1.4L turbocharged engine, delivering a maximum horsepower of 150PS, maximum power of 110kW, maximum torque of 240Nm, paired with a 7-speed dual-clutch transmission.
8
2
Share

What are the methods for judging the quality of a car battery?

Methods for judging the quality of a car battery are: 1. Check the electrolyte level height of the car battery; 2. Measure the electrolyte density to determine the discharge level; 3. Test the discharge level of the battery. A car battery consists of plate groups, separators, electrolyte, casing, terminals, connectors, and filler cap. The working principle of a car battery is to convert chemical energy into electrical energy. Car battery maintenance methods: 1. Avoid parking the car in open parking lots for extended periods; 2. In winter, avoid multiple uninterrupted starts of the car; 3. Frequently charge the car battery; 4. Regularly clean the battery terminals and apply grease to protect the wiring harness.
8
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.