What does the term 'zone' mean in cars?

Does Coasting in Neutral Gear Cause Difficulty in Re-engaging Gear?

When driving a motor vehicle down a long slope, coasting in neutral gear can cause difficulty in re-engaging the gear. Below is an introduction to the various gears of an automatic transmission car: 1. P gear: This is the parking gear, which uses the mechanical device inside the transmission to lock the rotating parts of the car. It must be used only when the vehicle is completely stopped. Additionally, when the car is turned off, the gear must be in P. 2. N gear: This is the neutral gear. Generally, when making a brief stop, the car is put into neutral. At this time, the right foot can leave the brake pedal to rest. However, if on a slope, the brake must still be pressed to prevent the car from rolling, unless the handbrake or electronic brake is engaged. 3. D gear: This is the drive gear. When in D gear, the driver only needs to control the accelerator pedal to adjust the speed. The transmission will automatically determine the appropriate gear based on the accelerator pressure and vehicle speed, eliminating the need for manual gear shifting.

6

5

Share

Which tire does not turn when the car makes a right turn?

All four tires rotate, but the right tires rotate slower than the left ones when making a right turn. Here is some relevant information about tires: 1. Wear: Tires have wear indicators. There are triangle marks on the sidewalls; when the wear reaches the point indicated by the triangle, replacement is recommended. Inside the tread grooves, there are also raised markers; when the wear reaches these raised markers at the tire surface, replacement is necessary. Simple punctures can be repaired without needing replacement, but bulges must be replaced. 2. Aging: Rubber oxidizes in the air, and oxidized rubber hardens, reducing grip. Therefore, even if a set of tires is not used, their lifespan will decrease. The maximum recommended usage time for tires should not exceed 5 years from the production date, which is marked on the tire sidewalls.

1

3

Share

Can a copy of the car owner's ID card be used for vehicle inspection in another location?

No, the original is required. You need to bring the original and a copy of your driver's license or registration certificate, the original of compulsory traffic insurance, and an application form with information such as the license plate number, the owner's name, and the name of the provincial vehicle management office where the inspection is entrusted. Direct vehicle inspection in another location is possible: Since September 1, 2018, cross-province vehicle inspection for small cars, trucks, and medium-sized buses has been fully implemented. This means applicants can directly inspect their vehicles and obtain the inspection qualification mark in provinces other than where the vehicle is registered, without needing to go through the entrusted inspection procedure. Annual inspection can be handled by an agent: Many services can be handled by third-party entrusted companies, and vehicle annual inspection is one of them.

19

0

Share

Does a Car Condenser Need Cleaning?

Car condensers do require cleaning. Here are the relevant details: 1. The car condenser needs cleaning as it is a crucial component of the vehicle's air conditioning system, affecting cooling efficiency, thus periodic cleaning is necessary; 2. Pay attention to fan speed settings. During normal operation, to prevent excessive frost buildup on the evaporator which could impair the AC system's performance, avoid keeping both the fan speed and temperature control at their lowest settings for extended periods. However, when driving below 25km/h, set the fan speed to low to prevent insufficient power generation and inadequate cooling; 3. Vent hot air before turning on the AC. The air conditioning system operates most efficiently with windows closed. If the car has been parked under intense sunlight for a prolonged period and the interior is very hot, open the windows first after starting the AC, then close them once the hot air has been vented. This significantly accelerates the cooling process.

5

1

Share

Can experienced students skip the training hours?

"If the training hours are not met, both experienced and new students must complete the required hours. Below is extended information about the driver's license test: 1. Subject 1: A total of 12 training hours are required. This is theoretical training, mainly to understand basic knowledge about motor vehicles and grasp the regulations of road traffic safety laws, regulations, and road traffic signals. 2. Subject 2: A total of 54 training hours are required, including 2 hours of theoretical knowledge and 52 hours of practical operation. Among these, 8 hours are required for training on reversing into a parking space, stopping and starting on a slope, parallel parking, curve driving, and turning at a right angle. 3. Subject 3: A total of 52 training hours are required. 'Road driving skills and safe civilized driving knowledge' requires 20 hours of training, while practical operation of road driving skills requires 32 hours. 4. Subject 4: This is a theoretical test, part of the motor vehicle driver's license assessment. The test consists of 50 questions, mainly in the form of cases, pictures, and animations, with a full score of 100 and a passing score of 90.

15

4

Share

What are the manifestations of severe malfunctions in the Insight Hybrid?

Here are the symptoms of severe malfunctions in the Insight Hybrid: 1. Uneven tire wear (inner edge wear): This issue primarily stems from improper suspension calibration in the Insight. After just a few days of driving, the inner edges of the tires show significantly more wear than the outer edges. This problem also causes the vehicle to pull to one side, though it typically resolves after a wheel alignment. 2. Steering hesitation: This issue has similar complaint rates to the uneven tire wear problem and represents another common Insight malfunction. Some owners report inconsistent power steering assistance during turns, resulting in non-smooth steering wheel operation. Additionally, some Insights exhibit abnormal steering noises, mainly caused by damaged steering gear. 3. Sudden loss of engine power: Currently available Insights are all 2019 models. In August 2019, Dongfeng Honda recalled the Insight due to instances of sudden speed loss at highway speeds - the same issue affecting the Accord at that time. However, this problem predominantly occurred in pure gasoline models, with hybrid versions being less affected.

20

1

Share

What does the term 'zone' mean in cars?

Does Coasting in Neutral Gear Cause Difficulty in Re-engaging Gear?

Which tire does not turn when the car makes a right turn?

Can a copy of the car owner's ID card be used for vehicle inspection in another location?

Does a Car Condenser Need Cleaning?

Can experienced students skip the training hours?

What are the manifestations of severe malfunctions in the Insight Hybrid?

Where is the car tire pressure monitor installed?

Is the fuel consumption of Haval high?

What is the recommended tire pressure for a 125cc scooter?

Where is the car USB port located?