···
Log in / Register

What Does the Term 'Three Oil Filters' Refer To?

3 Answers
GarrettDella
09/07/25 3:46am
Three oil filters typically refer to the regular maintenance items for a car: the oil filter, fuel filter, and air filter. Details about the three oil filters: The oil filter, also known as the oil grid, removes various impurities from the oil to ensure the proper functioning of the lubrication system. Air filters come in two types: dry and wet, and they are devices designed to remove particulate impurities from the air. Fuel filters are categorized into diesel filters, gasoline filters, and natural gas filters, with their main function being to filter out impurities from the fuel. Functions of the three oil filters: They are primarily used in pneumatic machinery, internal combustion engines, and other fields to remove impurities such as dust, metal particles, carbon deposits, and soot particles from the oil, thereby protecting the engine. They provide clean air to these mechanical devices to prevent them from inhaling air containing impurities during operation, which could increase the likelihood of wear and damage. They also block particles, water, and contaminants in the fuel, ensuring that the precision components of the fuel system are protected from wear and other damages.
Was this review help?
17
4
Share
EliRose
09/19/25 3:13am
I'm an ordinary driver with over ten years of experience behind the wheel. I often hear people mention the 'three filters for engine oil,' which actually refer to the oil filter, air filter, and fuel filter. The oil filter is located in the engine's oil circuit, working daily to filter out metal shavings and dust from the oil, preventing contaminants from entering the engine's core. The air filter manages the intake system, blocking road dust and impurities to ensure the engine doesn't inhale dirty particles. The fuel filter is positioned along the fuel line, filtering out impurities and moisture from the gasoline to ensure clean and efficient combustion. I replace these filters every year during maintenance. If not replaced in time, the engine may become noisier or lose power, especially noticeable during long-distance drives. In severe cases, it might even require an engine overhaul, doubling the cost. For regular cars, replacing them every 10,000 kilometers is sufficient. Don't skimp on this expense—it can extend your car's lifespan by several years.
Was this review help?
13
4
Share
Expand All
CaliLee
11/02/25 3:36am
When I first started learning to drive, I was completely baffled by the terminology. "Three filters for engine oil" refers to the oil filter, air filter, and fuel filter. The oil filter cleans the engine oil, ensuring smooth lubrication; the air filter protects the intake system, preventing dust and debris from harming the engine; the fuel filter removes impurities from the fuel, avoiding clogged fuel injectors. I learned that new car models might not require frequent changes within two years, but older cars need more attention. Otherwise, the car is prone to breaking down, and repairs can be troublesome. Once, I drove an old car that had been neglected for maintenance, and it stalled halfway, wasting time and costing extra money—a lesson learned the hard way. It's best to stick to regular maintenance; it's simple and worry-free.
Was this review help?
3
5
Share
Expand All
More Forum Discussions

What happens if you release the clutch too quickly when shifting gears?

Releasing the clutch too quickly when shifting gears will cause the car to stall. Here are some tips on clutch usage: 1. When shifting from a lower gear to a higher gear: In this case, you don't need to release the clutch slowly, but remember to shift only when the speed reaches the appropriate shifting point. At this time, releasing the clutch during upshifting won't affect the car, and since the speed has already increased, the car won't stall. 2. When shifting from a higher gear to a lower gear: You should release the clutch slowly when downshifting. If you release the clutch too quickly, you will feel a noticeable jerk. Therefore, after shifting, slowly release the clutch to give the car a transition period.
9
5
Share

What does Hill Descent Control (HDC) mean in cars?

Hill Descent Control (HDC), also known as the slope control system, enables drivers to smoothly navigate steep downhill slopes without the need to press the brake pedal, maintaining full control. The system automatically controls the braking of each wheel as needed, allowing the vehicle to move forward slightly faster than walking speed, while the driver can focus entirely on steering. The principle of HDC is to combine engine braking with the ABS anti-lock braking system to maintain a "low speed without losing tire traction" when descending steep slopes. HDC must be engaged when the transmission is in 1st gear or reverse gear (as there are two types of steep descents: forward and reverse), and the system typically sets a speed limit to allow the driver to control the vehicle with ease.
3
1
Share

What is the reason for the car dashboard not displaying the gear position?

The reasons why the car dashboard does not display the gear position are as follows: 1. Safety concerns: Since manual transmission operation is complex, if the driver shifts gears while observing the gear position, it will divide their attention and increase the likelihood of accidents. 2. Limited value: For manual transmission cars, shifting gears is the most critical operation, and drivers typically have a fixed shifting pattern in mind. Through years of accumulated experience, they can accurately confirm the gear position. Information regarding automatic transmission cars is as follows: 1. Automatic transmission cars: These do not require gear shifting while driving, whereas manual transmission cars need to change gears appropriately to alter vehicle speed and engine torque. 2. Gear positions: Common automatic transmission vehicles have several gear positions, including P, R, N, D, 3, 2, and 1.
13
0
Share

How to Maintain a Car in Daily Use?

Daily car maintenance methods: 1. Do not slam on the brakes suddenly; instead, apply them gradually to allow the vehicle sufficient buffer time; 2. Change tires frequently, as failing to do so can create safety hazards and place significant strain on the car's engine, potentially leading to accidents in severe cases; 3. Avoid overloading, as excessive weight places considerable burden on the vehicle itself, causing damage to the engine, chassis, braking system, and other components. Car maintenance refers to the preventive work of regularly inspecting, cleaning, supplying, lubricating, adjusting, or replacing certain parts of the car, also known as car servicing. Modern car maintenance primarily includes the upkeep of the engine system, transmission system, air conditioning system, cooling system, fuel system, power steering system, and more.
8
5
Share

Where is the air conditioning filter located in the Tiida?

The air conditioning filter in the Tiida is located behind the glove compartment on the passenger side, and the glove compartment needs to be removed for replacement. The air conditioning filter is a type of filter installed in the car's air conditioning system, which can absorb dust particles, alleviate respiratory discomfort, reduce irritation for allergy sufferers, and protect the air conditioning cooling system. The Tiida is a compact car launched by Dongfeng Nissan, with dimensions of 4393mm in length, 1766mm in width, and 1539mm in height, and a wheelbase of 2700mm. It is equipped with a 1.6L naturally aspirated engine, delivering a maximum power of 90kw, and is paired with either a CVT continuously variable transmission or a 5-speed manual transmission.
12
2
Share

What is the minimum ground clearance of the Jeep Grand Commander?

Jeep Grand Commander's minimum ground clearance is 213mm, which is generally sufficient for most road conditions. The minimum ground clearance refers to the distance between the lowest point of the vehicle (excluding the wheels) and the supporting surface when the vehicle is fully loaded and stationary, indicating the vehicle's ability to pass over obstacles like rocks and stumps without collision. The Jeep Grand Commander is a mid-size SUV produced by GAC FCA Jeep, with dimensions of 4873mm in length, 1892mm in width, and 1738mm in height, a wheelbase of 2800mm. It is equipped with a 2.0T turbocharged engine delivering a maximum power of 195kw, paired with a 9-speed automatic transmission.
2
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.