···
Log in / Register

What does the TEMP button in a car mean?

4 Answers
Josephine
07/29/25 5:17am

The TEMP button in a car stands for temperature setting. Pressing this corresponding button allows you to adjust the air conditioning temperature. Below is relevant information about the TEMP button: Common locations: TEMP is generally located on the air conditioning control panel. In some models, it may also be found on the rear armrest, indicating control over the rear air conditioning temperature—typically available in models equipped with dual-zone climate control. Some vehicles display TEMP on the dashboard, representing the outside temperature (which may slightly differ from the actual temperature). How to use the TEMP button: If there is a TEMP button in the vehicle's air conditioning operating system, you can use it to adjust the current interior air conditioning temperature. A TEMP button with an upward arrow increases the temperature, while a TEMP button with a downward arrow decreases the temperature.

Was this review help?
1
3
Share
StJake
08/12/25 6:57pm

Having driven cars for many years, I'm very familiar with the TEMP button. It's a temperature adjustment button, with the full name being Temperature, used to set the in-car temperature. For example, when it's cold in winter, pressing to increase the temperature makes the air conditioner blow warm air; when it's hot in summer, pressing to decrease the temperature cools things down. In cars with automatic air conditioning, it also works with the AUTO button. After setting the temperature, the system automatically adjusts the fan speed and mode, making it convenient and fuel-efficient. The principle is simple: sensors in the car detect temperature changes, and the controller then activates the air conditioning accordingly. I've used many cars and noticed that the TEMP button's location varies by model—some are near the steering wheel, others on the central control screen—so new drivers might need to try a few times. A little tip: setting the temperature between 22 to 24 degrees is most comfortable and helps reduce fatigue on long drives. If the button isn't responsive, it might be a wiring issue, and it's best to have it checked at a repair shop. In short, the TEMP button makes driving more comfortable, and you'll get used to it with a bit of practice.

Was this review help?
9
1
Share
Expand All
LeDakota
10/03/25 5:58am

My favorite button while driving is the TEMP key, which controls the in-car temperature. Pressing it allows you to adjust the temperature up or down—like increasing warmth in winter or cooling down during hot summer days, with the AC immediately blowing cold air. Many modern cars feature an auto function that automatically adjusts fan speed after setting the desired temperature, making it super convenient. I’ve also noticed that in extreme heat, it’s best not to set the temperature to the lowest immediately, as it may overload the AC. Instead, cracking the windows to release heat first and then setting TEMP to a moderate level is safest. If the button malfunctions and the indicator light doesn’t turn on, it could be a blown fuse or wiring issue—replacing a cheap fuse yourself often does the trick. Additionally, prolonged AC use requires regular maintenance of the filter; a clogged one can affect temperature efficiency. Using the TEMP key smoothly and setting the right temperature not only keeps you alert but also saves energy—truly an everyday essential.

Was this review help?
7
4
Share
Expand All
EmmaLee
11/16/25 7:38am

As a beginner driver, I also wondered what the TEMP button was. Actually, it's just a temperature control button. You press it to raise or lower the set temperature, and the air conditioner will blow hot or cold air accordingly to adjust the cabin temperature. The operation is very simple, for example, press the plus icon to increase temperature and the minus icon to decrease it. My experience is that starting the car first and then pressing the button works faster. If there's no response after pressing, check if the air conditioner is in OFF mode or if there's a system malfunction. It's best to consult the manual or ask for help. For safety, avoid frequently adjusting the temperature while driving, as it can be distracting.

Was this review help?
4
3
Share
Expand All
More Forum Discussions

Do You Need to Press the Clutch When Decelerating in a Manual Transmission Car?

When decelerating, first apply the brakes, and then press the clutch to shift gears after the speed has decreased. Here are some related introductions about the clutch: 1. Introduction: If you are driving at high speed in a high gear, never press the clutch while braking, because braking with the clutch pressed is equivalent to braking in neutral. At this time, the car relies entirely on the brake drum for braking, which will quickly heat up and suffer severe wear, affecting braking performance. 2. Solution: The correct braking method is to slowly press the brake when driving at high speed, allowing the speed to decrease uniformly until you feel the car start to shake (at this point, the speed is low enough that it is no longer suitable for driving in a high gear). At this time, you can press the clutch and downshift, allowing you to drive at a lower speed in a low gear or shift to neutral to bring the car to a complete stop.
16
1
Share

What is the fuel tank capacity of the Q3 in liters?

Currently, there are 6 available models of the Audi Q3 on sale. The quattro version has a fuel tank capacity of 62.5 liters, while other versions have a capacity of 60 liters. This data is published by the automobile manufacturer, and owners who have purchased the Audi Q3 can also check it on the vehicle's configuration sheet. The Audi Q3 requires 95-octane fuel, with a fuel consumption of 6.7 to 7.5L per 100 kilometers. A full tank can cover a distance of 833 to 896 kilometers. During daily driving, it is necessary to always pay attention to the remaining fuel in the tank. This is generally observed through the fuel gauge inside the vehicle. If there are no other issues, the fuel level will be accurately reflected on the gauge. The fuel gauge typically has 5 to 6 segments, and it is advisable to refuel when there are only 2 segments left to avoid running out of fuel midway. During actual refueling, the amount of fuel may exceed the calibrated capacity. This is because the fuel tank capacity specified by the manufacturer is measured from the bottom of the tank to the safe limit, and there is additional space from the safe limit to the tank opening. This space is designed to allow for fuel expansion due to temperature increases without causing overflow. If fuel is filled up to the tank opening during refueling, the actual amount of fuel added may exceed the calibrated tank capacity.
3
3
Share

Why is the car's steering wheel not straight?

Here are the reasons why a car's steering wheel may not be straight: 1. Inconsistent tire pressure among the four wheels; 2. Wear in the braking system; the braking system cannot fully return to position, causing resistance in one of the wheels during driving. 3. Wear in various chassis components, leading to changes in alignment angles; 4. Deformation of shock absorbers or reduced elasticity of shock absorber springs, which can cause changes in vehicle height. 5. Deformation of the stabilizer bar and its small links can also result in uneven vehicle height on one side. Below are solutions for a misaligned steering wheel: 1. Inflate the tires with low pressure to maintain equal tire pressure across all four wheels; 2. Replace the braking system; 3. Perform a four-wheel alignment.
1
0
Share

What are the models of Great Wall off-road vehicles?

Great Wall off-road vehicles include the Haval Diesel 2.5TCI, Haval Gasoline 4G69, Haval H3, Haval H5, Haval M1, etc. The following is an introduction to Great Wall Motors related content: 1. Brand: A Chinese automotive brand established in 1984. 2. Production: Mainly produces SUVs, electric vehicles, pickups, sedans, and new energy vehicles. 3. Subsidiary Brands: Comprises four major brands: Great Wall, Haval, WEY, and the pure electric brand ORA. 4. Design: An off-road vehicle is specifically designed for off-road use, primarily referring to vehicles capable of operating on rough terrain.
8
5
Share

Does the Roewe RX5 have a tire pressure monitoring system?

The Roewe RX5 is equipped with a tire pressure monitoring system (TPMS), which is controlled by ABS to constantly monitor the speed of each wheel. Below is an introduction to the functions of the tire pressure monitoring system: 1. Prevent accidents: The tire pressure monitoring system is a type of active safety device that can alert the driver in time when there are dangerous signs in the tires, prompting them to take appropriate measures, thereby avoiding serious accidents. 2. Extend tire service life: With the tire pressure monitoring system, the tires can always be kept working within the specified pressure and temperature range, thereby reducing tire damage and extending their service life. 3. Make driving more economical: When the tire pressure is too low, the contact area between the tire and the ground increases, thereby increasing friction resistance. When the tire pressure is 30% below the standard value, fuel consumption will increase by 10%.
18
3
Share

How to Solve Small Pits After Spray Painting?

This can be judged as a failure in the vehicle surface treatment process, with issues in paint hardness and density. You can request the dealership to respray it. If this phenomenon occurs in a new car as pinholes, it can be addressed through polishing.
16
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.