What does the t-belt warning light mean?

1 Answers
DeclanAnn
07/29/25 7:25pm
t-belt is the timing belt warning light. When this light illuminates, it reminds the owner to replace the timing belt as soon as possible. Here is relevant information about timing belts: 1. Introduction: The timing belt is an important component of the engine's valve system. It connects to the crankshaft and ensures accurate intake and exhaust timing through a specific transmission ratio. As a consumable part, the timing belt has fixed mileage and time limits for usage. Once the timing belt exceeds its service life, there is a high risk of breakage. 2. Consequences of breakage: If the timing belt breaks, the camshaft will not operate according to the correct timing, which may cause the valves to collide with the pistons, resulting in severe damage. Therefore, the timing belt must be replaced according to the mileage or time specified by the manufacturer.
Was this review help?
17
1
Share
More Forum Discussions

What is the 0-100 km/h acceleration time of the Changan Oshan X5?

According to official data, the Changan Oshan X5 comes with two engine options: a 1.5T and a 1.6L. The 1.5T model achieves a 0-100 km/h acceleration time of 7.79 seconds, while the 1.6L model also reaches 7.79 seconds. Factors affecting the 0-100 km/h acceleration time of a vehicle are as follows: Torque: Torque, in simple terms, represents how much force the engine can generate. The greater the torque, the stronger the force pushing the vehicle, resulting in faster acceleration. The Changan Oshan X5 1.5T has a maximum torque of 300 Nm, enabling a 0-100 km/h acceleration time of 7.79 seconds. Transmission efficiency: The transmission acts as a medium for power delivery and inevitably involves power loss. Higher transmission efficiency leads to better acceleration performance. Generally, the ranking of transmission efficiency is as follows: manual transmission > dry dual-clutch transmission > wet dual-clutch transmission > AT transmission > CVT transmission. The Changan Oshan X5 1.5T is equipped with a 7-speed wet dual-clutch transmission. Power-to-weight ratio: The relationship between horsepower and vehicle weight is called the power-to-weight ratio (unit: Hp/T). A higher power-to-weight ratio results in faster acceleration. The Changan Oshan X5 1.5T has a power-to-weight ratio of 133 Hp/T, contributing to its 0-100 km/h acceleration time of 7.79 seconds.
11
3
Share

How to Set Up BMW Welcome Light When Locking the Car

BMW welcome light setting method when locking the car: 1. You can set the welcome light duration in iDrive. After setting the time, press the diamond-shaped button to automatically activate the welcome light function; 2. After turning off the engine, flick the high beam once, then exit and lock the car. The key will automatically memorize this setting, completing the welcome light setup. Taking the BMW 5 Series 2021 525Li M Sport Package as an example: It is a mid-to-large-sized sedan under BMW Brilliance, with gasoline as the energy type and meeting China VI emission standards. In terms of power, the vehicle is equipped with a 2.0T turbocharged engine (model B48B20C) paired with an 8-speed automatic transmission.
7
5
Share

What is the fuel tank capacity of the Roewe RX5 1.5T model?

The fuel tank capacity of the Roewe RX5 1.5T model is 55 liters. This data is officially released, and owners who have purchased the Roewe RX5 1.5T model can also check it on the vehicle's configuration sheet. The Roewe RX5 1.5T model uses 92-octane fuel, with a fuel consumption of 6.8-6.9L per 100 kilometers. A full tank can cover a distance of 797-808 kilometers. During daily driving, it is necessary to always pay attention to the remaining fuel in the tank. This is usually observed through the fuel gauge inside the car. If there are no other issues, the fuel level will accurately reflect on the gauge. The fuel gauge typically has 5 to 6 segments, and it is advisable to refuel when there are 2 segments left to avoid running out of fuel midway. During actual refueling, the amount of fuel may exceed the marked capacity. This is because the fuel tank capacity marked by the manufacturer is from the bottom of the tank to the safe limit. There is additional space from the safe limit to the tank opening, which is designed to allow for fuel expansion when temperatures rise, preventing overflow. If fuel is filled up to the tank opening during refueling, the actual amount of fuel added may exceed the marked tank capacity.
18
4
Share

What Are the Hidden Functions of the BMW 5 Series Car Key?

BMW 5 Series car key has the following hidden functions: Press and hold the unlock button to lower all four windows simultaneously, and press and hold the lock button to raise all four windows at the same time. Steps to replace the key battery: 1. Press the switch on the back of the key to remove the mechanical key; 2. Insert the mechanical key into the slot next to the key and gently pry open the key cover; 3. Use a small flat-head screwdriver to remove the old battery; 4. Insert the new battery, ensuring the positive side faces up; 5. Reassemble the key. Taking the BMW 5 Series 2021 Modified 525Li Luxury Package as an example: This car is manufactured by BMW Brilliance, classified as a mid-to-large-sized sedan, with a gasoline energy type, a maximum power of 135kw, and a maximum torque of 290nm.
8
2
Share

What is the fuel tank capacity of the ASX?

The fuel tank capacity of the ASX is 63 liters. This data is officially released, and ASX owners can also check it on the vehicle's configuration sheet. The ASX uses 92-octane gasoline, with a fuel consumption of 6.6-7.3L per 100 kilometers. A full tank can cover a distance of 863-954 kilometers. During daily driving, it is necessary to always pay attention to the remaining fuel level in the tank. Generally, the fuel level is observed through the fuel gauge inside the car. If there are no other issues, the fuel level will be accurately reflected on the gauge. The fuel gauge typically has 5 to 6 segments, and it is advisable to refuel when there are 2 segments left to avoid running out of fuel midway. During actual refueling, the amount of fuel may exceed the marked capacity. This is because the fuel tank capacity marked by the manufacturer is from the bottom of the tank to the safe limit, and there is additional space from the safe limit to the tank opening. This space ensures that the fuel can expand when the temperature rises without overflowing. If the fuel is filled up to the tank opening during refueling, the actual refueling amount may exceed the marked tank capacity.
14
0
Share

What Factors Affect a Car's Acceleration Performance?

Factors affecting a car's acceleration performance include horsepower and torque, transmission efficiency, and power-to-weight ratio. Horsepower and torque are fundamental but not absolute determinants: The engine performs cyclic work to output horsepower and torque. Horsepower is a unit of power representing how much energy the engine can generate. The greater the horsepower, the higher the vehicle's top speed. Torque, on the other hand, measures the force of this energy—the greater the torque, the stronger the push on the vehicle, naturally leading to faster acceleration. However, horsepower and torque are not decisive factors. Take an extreme example: high-speed trains have immense horsepower and torque, yet their acceleration is slow. Thus, horsepower and torque merely form the foundation of a car's performance. Higher transmission efficiency aids acceleration: As the medium for transmitting power, the transmission inevitably involves power loss. Currently, manual transmissions boast the highest efficiency, reaching up to 95%. Different transmission types exhibit varying efficiencies, generally ranked as follows: manual > dry dual-clutch > wet dual-clutch > AT > CVT. Therefore, a car's acceleration performance cannot overlook the transmission—the higher its efficiency, the better the acceleration. The power-to-weight ratio is the decisive factor—greater ratios mean faster acceleration: With power sourced and transmitted, the final effect comes into play, introducing the term "power-to-weight ratio." This ratio compares a car's horsepower to its weight. For cars of equal weight, higher horsepower yields a greater power-to-weight ratio. This ratio is a critical factor in determining acceleration—the larger it is, the quicker the acceleration.
7
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.