What does the SVS light on in JMC Transit mean?

2 Answers
VonLucy
07/24/25 12:10am
SVS light on indicates that the engine control unit has detected an error signal from a sensor or that it has exceeded the usage standard. Below are the functions of the SVS indicator light and the reasons why the SVS light is on: Functions of the SVS indicator light: The SVS fault indicator light is a warning light that appears when the ECU or TCU of an electronically controlled fuel injection vehicle detects an issue with the engine or automatic transmission. For manual transmissions, it is the engine fault indicator light, while for automatic transmissions, it indicates both engine and automatic transmission faults. When the ignition key is turned on, this light will illuminate and should turn off after the vehicle starts. If the engine detects a fault, the SVS light will stay on. If this light comes on while driving, it indicates an engine fault. Reasons for the SVS light being on: Poor combustion state; low-quality fuel; dirty engine cylinders with carbon deposits. Solution: Use the recommended grade of gasoline for JMC Transit and clean the carbon deposits.
Was this review help?
13
0
Share
StEmma
08/10/25 7:58pm
I found that when the SVS light of the JMC Transit comes on, it usually means the engine control system has detected an abnormality. This could be due to emission issues, sensor failures such as the oxygen sensor or crankshaft position sensor malfunctioning, or insufficient fuel system pressure or blockage. Ignoring this light can easily lead to delays, ranging from reduced power and increased fuel consumption to severe engine damage. When I encounter this situation while driving, I first find a safe place to park and avoid pushing the vehicle. I promptly use an OBD scanner to read the fault codes to confirm the cause, then take it to a repair shop for inspection and repair. Long-term neglect may even lead to catalytic converter damage, which can be costly. Therefore, developing a habit of regular maintenance is crucial, such as frequently checking the air filter and spark plugs, to avoid such troubles.
Was this review help?
1
3
Share
Expand All
More Forum Discussions

What is the tire pressure for the Lavida?

The normal tire pressure for the Volkswagen Lavida ranges between 2.4 and 2.5 bar. Due to seasonal factors, the tire pressure can be appropriately increased by 0.2 bar in winter and decreased by 0.1 bar in summer. This data complies with the international GBT2978-2008 standard requirements. The Volkswagen Lavida's tire pressure monitoring system is displayed on the dashboard and is enabled by default. When the tire pressure is abnormal, a tire pressure warning light will illuminate to alert the driver. There is no physical button for the tire pressure monitoring system in the vehicle. Generally, a tire pressure exceeding 2.8 bar is considered too high, while a tire pressure below 2.0 bar is considered too low. Hazards of overinflated tires: Reduced tire friction and adhesion, affecting braking performance; causes steering wheel vibration and deviation, reducing driving comfort; accelerates wear on the central tread pattern, shortening tire lifespan; increases vehicle vibration, indirectly affecting the lifespan of other components; overstretches tire cords, reducing elasticity and increasing the load on the vehicle during driving. Hazards of underinflated tires: Increased friction coefficient with the road surface, leading to higher fuel consumption; makes the steering wheel heavy and prone to deviation, compromising driving safety; increases movement of tire components, causing abnormal heat due to excessive rolling; reduces the functionality of cords and rubber, leading to delamination or cord breakage and excessive friction with the rim, damaging the bead area and causing abnormal wear; multiplies friction between the tire and ground, rapidly increasing tire temperature, softening the tire, and drastically reducing its strength. High-speed driving may result in a tire blowout. If the tire pressure monitoring indicator light illuminates (a yellow symbol with an irregular circle, no seal on top, four small spikes at the bottom, and an exclamation mark inside), there are generally three possible causes: Abnormal tire pressure: Typically, an alarm is triggered when the pressure is below 1.8 bar or above 3.0 bar. In this case, a tire inspection and pressure adjustment are required. Tire pressure monitoring not reset: After inflating the tires, if the tire pressure is not reset promptly, the system continues to record the previous data, causing the indicator light to illuminate. Simply resetting the tire pressure will resolve this issue. Damaged tire pressure sensor: The tire pressure sensor, installed inside the tire and connected to the inflation valve, monitors tire pressure. If the sensor is damaged due to impact while driving, the tire pressure warning light will illuminate. In such cases, the only solution is to replace the sensor with a new one.
8
5
Share

How to Clean Vehicle Drain Holes?

Connect a syringe to an infusion tube to first extract accumulated water from the drainage channel, preventing backflow during forced injection. Use high-pressure airflow to pressure-clean the drain pipe. Wrap the nozzle with a piece of cloth to avoid splashing dirty water onto clothes and the vehicle.
11
1
Share

How to Solve the Problem of Oil Burning in Buick Cars?

For older vehicles, using engine oil with higher viscosity can be considered, as thicker oil provides better sealing. The maintenance cycle of a car is determined based on its normal usage conditions. It is advisable to shorten the maintenance interval and the specified mileage according to the actual situation. Additionally, prolonged high-speed driving should be avoided as much as possible.
15
5
Share

How to Deal with Sunroof Leakage in Vehicles?

The consequence is that water will seep out from the sunroof gap and drip into the interior. If broken, it can also cause water leakage in the car's A-pillar or C-pillar. Water leakage in the A-pillar or C-pillar of the car is basically due to a broken sunroof drain hole or joint. This situation is relatively complicated.
18
1
Share

How to Handle a Rear-End Collision Where I Am Fully at Fault?

Get out of the car to assess the severity of the vehicle damage caused by the accident. Next, promptly take photos for evidence, capturing multiple angles of the scene comprehensively. If both parties cannot agree on the determination of fault, call the police to handle the situation, and let the traffic police determine the liability for the accident. Proceed with insurance repairs. It is recommended to go to a 4S shop for repairs, as they use genuine parts and have more advanced diagnostic equipment.
16
1
Share

How to Claim Insurance for Vehicle Damage Caused by Typhoon?

Compensation can be obtained through vehicle damage insurance. Most losses caused by typhoon weather can be compensated by vehicle damage insurance. "Subrogation right" can be utilized. When a typhoon approaches, it is also important to pay attention to parking. If the vehicle is parked outdoors, it may be damaged by objects blown down by strong winds. This falls under the scope of vehicle damage insurance. If a vehicle is crushed by a tree blown down during typhoon weather, the owner does not need to be overly anxious.
2
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.