What does the steering wheel airbag mean?

How to Reset the Tire Pressure Warning Light on the New Passat?

Method to reset the tire pressure warning light on the new Passat: The new Passat has a dedicated button to reset the tire pressure warning light. The button is located on the right side of the vehicle's gear shift lever, and the first button is the tire pressure reset button. Hold it for 3 seconds to complete the reset. The specific steps are as follows: 1. Press the brake pedal to prepare to start the engine; 2. Press the one-touch start button; 3. Wait for all dashboard lights to illuminate, indicating the engine has started; 4. Inflate all four tires to the standard pressure; 5. Press the tire pressure reset button to complete the operation. The Passat sedan has swept the global auto market with its high safety standards, classic design, and top-tier manufacturing quality. Taking the Passat 2020 Modified 330TSI Premium Edition National VI as an example: its exterior dimensions are 4933mm in length, 1836mm in width, and 1469mm in height, with a wheelbase of 2871mm; it is equipped with a 2.0T 186-horsepower L4 turbocharged engine and a 7-speed dual-clutch transmission.

19

4

Share

What Components Make Up the Power Steering System?

Car steering system's function is to allow the driver to control the vehicle's direction and maintain stable straight-line driving. The vehicle's steering system generally consists of a steering gear and a steering linkage mechanism. Here is more information about the steering system: 1. The steering gear is composed of main components such as the steering wheel, steering shaft, steering worm, and sector gear; the steering linkage mechanism includes components like the steering pitman arm, steering drag link, steering knuckle arm, left and right steering tie rod arms, and steering tie rod. 2. The steering gear is divided into two parts: the steering column and the steering meshing mechanism. The main function of the steering column is force transmission and safety protection; the steering meshing mechanism's role is to increase torque and transmit steering force to the steering linkage mechanism. 3. The function of the steering linkage mechanism is to transmit the force from the steering meshing mechanism to the front wheels to achieve steering.

12

0

Share

Can the BMW X5 be fitted with regular tires?

BMW X5 can be fitted with regular tires, but it is essential to carefully check the wheel rim specifications and other details to ensure the replacement tires match the original vehicle specifications, thereby avoiding deviation in driving trajectory. The BMW X5 originally comes equipped with run-flat tires. If switching to regular tires, it is advisable to carry a spare tire as a precaution. The factory-installed tires on the BMW X5 are generally run-flat tires. The advantage of run-flat tires is that they can ensure driving for several tens of kilometers even in the event of air loss or a flat tire, though this does not mean they are puncture-proof. Only about 3% of all brand cars sold in the market are equipped with run-flat tires (primarily found in high-end vehicles). The advantage of regular tires is better comfort, but they are virtually immobile in the event of a flat tire, making them more suitable for urban roads. Over 97% of all brand cars sold in the market use regular tires. The difference between run-flat tires and traditional regular tires lies in the design of the tread: run-flat tires have thicker and more robust treads, with sidewalls that are highly resistant to deformation. In cases of air leakage or sudden pressure loss, the vehicle can still travel up to 250 kilometers at a speed of 80 kilometers per hour. The sturdy sidewalls ensure that the tires and rims do not deform, preventing any shift in the vehicle's center of gravity and thereby enhancing driving safety.

4

2

Share

Can the Oil Filter Element Be Reused?

Car oil filter elements cannot be reused, as this may cause oil blockage, leading to abnormal engine operation. Function of the Oil Filter Element: The oil filter element filters the engine oil. During circulation within the engine, the oil inevitably accumulates impurities and particles, which the filter element removes. Without an oil filter, these particles would continuously circulate in the engine, accelerating wear and tear. Maintenance of the Oil Filter: Regularly clean and replace the oil filter element. Under normal usage, if the pre-filter's differential pressure alarm activates or after 300 hours of cumulative operation, the filter element should be replaced. For dual-tank parallel pre-filtration systems, replacement can be done without shutting down the engine. For single-tank pre-filtration systems: Close the inlet ball valve and open the top cover; unscrew the drain plug to completely drain the dirty oil; loosen the fastener nut at the top of the filter element, and while wearing oil-resistant gloves, grip the element and remove it vertically upwards; install the new filter element, ensuring the top sealing ring is properly placed (the bottom has a built-in seal), and tighten the nut; secure the drain plug, close the top cover (ensuring the seal is in place), and fasten the bolts. For dual-tank parallel pre-filtration systems: First, close the inlet valve of the filter to be replaced, wait a few minutes, then close the outlet valve, and unscrew the end cover bolts to open it; open the drain valve to completely remove dirty oil, preventing it from entering the clean oil chamber during replacement; loosen the fastener nut at the top of the filter element, and while wearing oil-resistant gloves, grip the element and remove it vertically upwards; install the new filter element, ensuring the top sealing ring is properly placed (the bottom has a built-in seal), and tighten the nut; close the drain valve, secure the top cover (ensuring the seal is in place), and fasten the bolts; open the inlet valve first, then the exhaust valve, and close the exhaust valve immediately once oil flows out, followed by opening the outlet valve; repeat the same procedure for the other filter.

19

1

Share

Which country produces Briston motorcycles?

Briston motorcycles are Austrian vehicles, but their production line is located in China. Briston motorcycle models: The models include the Jizhou ADVISABL150T-4D, Briston BL150T-3D, and Briston Lank BL150T-D Glory Edition. Briston Lank body dimensions: Its body structure is that of a scooter motorcycle, with dimensions of 1930mm in length, 750mm in width, and 1180mm in height. The wheelbase is 1365mm, the minimum ground clearance is 110mm, and the seat height is 780mm.

12

2

Share

Where is the air conditioning filter located in the new Santana?

The air conditioning filter in the new Santana is located above the passenger footwell on the co-driver side. Below is a detailed introduction to the new Santana's air conditioning filter: 1. PM2.5 pollutant purification efficiency can reach over 95%. 2. The black side contains activated carbon, and many small cylindrical activated carbon particles can be seen inside the honeycomb mesh. 3. The filter is surrounded by sealing foam that tightly encloses all four sides, adhering closely to the housing to prevent dust leakage and intercept surrounding dust. 4. It purifies the air inside the vehicle, ensuring the health of the occupants.

6

5

Share

What does the steering wheel airbag mean?

How to Reset the Tire Pressure Warning Light on the New Passat?

What Components Make Up the Power Steering System?

Can the BMW X5 be fitted with regular tires?

Can the Oil Filter Element Be Reused?

Which country produces Briston motorcycles?

Where is the air conditioning filter located in the new Santana?

Where is the OBU usually placed?

What are the symptoms of a faulty catalytic converter?

How to Turn On the Daytime Running Lights on the New Passat?

How Long is the Ford Kuga?