What does the steaming cup symbol on the car dashboard mean?

Will the car alarm sound if the car door is not closed tightly?

If the car door is not closed tightly, the car alarm will sound. If not resolved, the alarm will continue to sound until the car battery runs out of power or the door is properly closed again. In addition to the door not being closed tightly, there are other reasons that may cause the car alarm to sound unnecessarily, as detailed below: The engine hood is not closed tightly: When components such as the vehicle's engine hood or trunk are not properly closed, the car alarm will activate and emit an alert sound. In such cases, simply re-closing the engine hood or trunk door will deactivate the alarm. The trigger sensitivity is too high: The alarm may activate in response to minor vibrations or relatively low noise levels. Sometimes, excessively loud vibrations can also trigger the car alarm. The solution is to locate the main body of the alarm, typically found under the steering wheel or within the protective panel below the A-pillar, and then slightly adjust the sensitivity adjustment button. However, avoid setting it too low, as this may reduce the car's anti-theft effectiveness. If you cannot adjust it to an appropriate sensitivity level, you may need to visit an auto repair shop for assistance. Alarm wiring issues: If the car alarm produces abnormal noise, it may indicate a problem with the main wiring of the alarm, requiring inspection, repair, or replacement. However, individuals without relevant knowledge will not be able to fix such issues, whether it involves checking the wiring or replacing the alarm. Additionally, the alarm's main body integrates many circuits. If installation issues occur, it may render the alarm unusable or even damage the car's internal wiring, potentially causing a short circuit. Therefore, it is advisable to have such repairs handled at a 4S shop.

5

0

Share

What is the model of Hongqi's engine?

Hongqi's engines mainly include the 1.8T, 2.0T, and 3.0V6 versions, with model numbers primarily CA4GC18T01, CA4GC20T, and CA6GV1. Below is related content introduction: 1. CA6GV is a domestically produced engine: It is an engine independently developed by China's FAW Group, with a very wide range of applications. 2. The brand history of Hongqi: Hongqi brand cars are a household name in China. The name 'Hongqi' has far exceeded the meaning of a car brand, as too many historical events in New China are related to 'Hongqi'. Hongqi was established on May 12, 1958. The first domestically produced small car born at FAW that year was not called 'Hongqi' but 'Dongfeng', because at that time, Chairman Mao Zedong had a famous judgment on the world situation: 'The East Wind prevails over the West Wind', and it was designated as CA71. Hongqi cars not only have a profound historical heritage and can rank among high-end cars, but they also have a lot to do with their trendsetting in the automotive design industry. They can be said to be trend makers, especially recently, Hongqi cars have performed very well, with concept car designs that are particularly eye-catching, causing a sensation every time they appear. Moreover, Hongqi concept car designs rarely borrow from other high-end car designs, insisting on their own path, with many design elements and lines being their own original creations.

19

0

Share

What causes low boost circuit pressure in the Peugeot 3008?

When the pump is in a self-priming state, if there is air leakage in the oil inlet pipeline or significant leakage in components such as hydraulic cylinders, check valves, and directional valves within the system, the pressure may fail to rise. This requires identifying the air leakage points and tightening or replacing the seals to increase the pressure. Below is a detailed introduction: 1. Powertrain: Equipped with a 1.6L turbocharged engine, delivering a maximum power of 163 HP at 6000 rpm and a peak torque of 240 N·m between 1400-4000 rpm. 2. Features: The Dongfeng Peugeot 3008 boasts three core strengths: "T+STT High-Efficiency Powertrain," "Mirage Fighter Jet Intelligent Cockpit," and "Hobby Leisure Lifestyle," offering a more technological and stylish experience.

8

0

Share

What is the speed limit for each lane on a four-lane highway in the same direction?

On a four-lane highway in the same direction, the maximum speed limit is 120 km/h. Here are the detailed regulations for each lane: 1. The leftmost lane is the overtaking lane, with a speed limit of 100-120 km/h. It is used for passing vehicles in the main driving lane. After overtaking, it is advisable to return to the main driving lane. 2. The second lane from the left is the main driving lane, with a speed limit of 80-100 km/h. Under normal traffic conditions, vehicles should drive in this lane. 3. The third lane from the left is the slow lane, with a speed limit of 60-80 km/h, typically designated for trucks. 4. The fourth lane from the left is the emergency lane, reserved for vehicles experiencing breakdowns or accidents. This lane is clearly marked with a solid white line separating it from the third slow lane. Under normal driving conditions, do not use this lane. Unauthorized use of the emergency lane can result in a maximum penalty of 12 demerit points.

1

4

Share

Where is the OBD interface of Excelle?

The OBD interface of Excelle is located behind the coin box on the driver's side. OBD stands for On-Board Diagnostics, and its functions are: 1. To locate and describe faults in specific parts or components, facilitating repairs; 2. To alert about faults that cause excessive emissions, indicating an increase in environmental pollution. Taking the 2020 Excelle as an example, its body dimensions are: length 4468mm, width 1765mm, height 1469mm, with a wheelbase of 2611mm. The 2020 Excelle is equipped with a 1.3L naturally aspirated engine, delivering a maximum horsepower of 107PS, a maximum torque of 133Nm, and a maximum power of 79kW, paired with a 5-speed manual transmission.

11

1

Share

What is the Difference Between China-Spec Vehicles and Parallel Import Vehicles?

The difference between China-spec vehicles and parallel import vehicles lies in their distributors: China-spec vehicles are imported with manufacturer authorization, mostly introduced by domestic general agents and sold in 4S stores; parallel import vehicles are not authorized by the manufacturer and are introduced by other dealers. China-spec vehicles refer to models produced by large foreign automakers to suit different regions, specifically for sale and use in China. Parallel import vehicles, officially known as parallel trade import vehicles, are cars purchased by traders from overseas markets and introduced into the Chinese market for sale without brand manufacturer authorization.

15

4

Share

What does the steaming cup symbol on the car dashboard mean?

Will the car alarm sound if the car door is not closed tightly?

What is the model of Hongqi's engine?

What causes low boost circuit pressure in the Peugeot 3008?

What is the speed limit for each lane on a four-lane highway in the same direction?

Where is the OBD interface of Excelle?

What is the Difference Between China-Spec Vehicles and Parallel Import Vehicles?

Why Won't My Buick Start?

What could be the reason for the unresponsive automatic door switch of the Buick GL8?

What are the reasons for Honda air conditioning not cooling?

What type of engine oil can be used for the Mercedes-Benz GLC260?