What does the ST light mean?

1 Answers
RyanLee
07/30/25 3:23am
When the ST light comes on, it generally indicates that the brake light is not working. Here is some related information about the ST light: 1. The ST light is a brake light filament failure warning light, also known as the brake light filament breakage indicator. The dashboard displays an image consisting of an 'S' and a 'T'. 2. When the ST light comes on, promptly check whether the brake light filament has broken and address the issue accordingly. If the brake light filament is intact, the issue may be a faulty relay, and it is recommended to contact a service station for inspection. 3. When the light failure indicator on the dashboard comes on, it is advisable to check which light is malfunctioning and replace the bulb promptly.
Was this review help?
14
2
Share
More Forum Discussions

Is Oil Extraction or Draining More Thorough?

Extracting oil is more thorough than loosening the oil pan drain plug. Oil extraction uses compressed air to remove approximately 80% of the old oil, whereas draining by loosening the oil pan plug relies on gravity, which cannot fully remove old oil from small oil passages and holes. Therefore, using an oil extractor results in a cleaner oil change than draining via the oil pan plug. Below are some precautions for changing engine oil: 1. Drain the oil when it's hot for better fluidity. 2. Fill to the level indicated on the dipstick. 3. Choose the oil change interval based on vehicle condition, road conditions, oil quality, and driving habits. 4. Select oil based on driving environment, driving frequency, and the engine's requirements—prefer higher quality over lower.
14
5
Share

When to Turn the Steering Wheel When Exiting the Garage in Subject 2?

When exiting the garage in Subject 2, observe the line in the lower left rearview mirror. When the rearview mirror covers the line, turn the steering wheel fully to the left. Below are the specific operation methods for exiting the garage in Subject 2: 1. Method 1: Look at the left rear wheel through the left rearview mirror. When the left rear wheel just touches the line, turn the steering wheel fully to the left. The advantage of this method is that it is not affected by height, but it is relatively difficult to observe. Finally, when the vehicle is about to straighten, turn the steering wheel back half a turn. Let the car move forward one meter, then turn the steering wheel fully to the left again until reaching the stopping point. 2. Method 2: Observe the frontmost part of the car hood and the boundary line ahead. When the car hood just covers the boundary line, turn the steering wheel fully to the left. Because everyone's height is different, some people turn the steering wheel when they are about to touch the line.
9
3
Share

Does the Zotye 5008 have a 7-seater version?

Zotye 5008 does not have a 7-seater version. The Zotye 5008 is a compact SUV with body dimensions of 3970mm in length, 1570mm in width, and 1733mm in height, with a wheelbase of 2420mm. The Zotye 5008 is equipped with two engines: a 1.3L naturally aspirated engine and a 1.5L naturally aspirated engine. The 1.3L engine delivers a maximum power of 93 horsepower and a maximum torque of 113 Nm, while the 1.5L engine produces a maximum power of 106 horsepower and a maximum torque of 134 Nm. Both engines feature multi-point fuel injection technology and use an aluminum cylinder head with an iron cylinder block. They are paired with either a 5-speed manual transmission or a CVT transmission.
15
2
Share

What brand of engine does the Zhonghua H3 use?

Zhonghua H3 uses an engine independently developed by Brilliance Auto. Here is some extended information about the Zhonghua H3 and its engine: The function of the engine is: To fully combust the fuel input into the cylinders and generate power; it determines the vehicle's power performance, fuel economy, stability, and environmental friendliness. Introduction to the Zhonghua H3: Taking the 2017 Zhonghua H3 as an example, its body structure is a 4-door, 5-seater sedan with dimensions of length 4640mm, width 790mm, height 1445mm, a wheelbase of 2660mm, and a fuel tank capacity of 50 liters. The 2017 Zhonghua H3 features a MacPherson strut front suspension and a torsion beam rear suspension. It is equipped with a 1.5L naturally aspirated engine, delivering a maximum horsepower of 112PS, a maximum power of 82kW, and a maximum torque of 145Nm, paired with a 5-speed manual transmission.
13
3
Share

How many Audi Q7 Pikes Peak are there in the world?

Audi Pikes Peak has only one unit globally. Below are the specific details about this model: Introduction: The Audi Pikes Peak was created as a concept car to commemorate the successful ascent of Pikes Peak (the name of a mountain) by the Audi team; it can also be considered the predecessor of the Audi Q7. That said, the Audi Pikes Peak comes with quite luxurious configurations. The multimedia interface is borrowed from the new Audi A8 sedan, and the dashboard includes easy-to-read gauges and 3D laser optical illumination. All main controls are slightly tilted towards the driver. The full-length transparent roof is made of colored safety glass, and the entire body is constructed from aluminum, making it eco-friendly and lightweight. Value: It is likely housed in the Audi factory's automobile museum. Such concept cars hold significant importance for the manufacturer and may incorporate some yet-to-be-released technologies. From a confidentiality standpoint, manufacturers usually do not sell such concept cars. While it's possible to showcase them to the media, taking one home is somewhat unrealistic. This is a car with only one unit in the world.
6
0
Share

How to Reset the Tire Pressure Monitoring System on Wuling Hongguang S1?

Ning Yi
16
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.