What does the SRC button on a car mean?

1 Answers
DiBella
07/29/25 9:33pm
The SRC button on a car is the audio source selection button, used for switching between CD, USB, radio, Bluetooth audio, or songs, and also for tuning radio stations. It is generally located on the multifunction steering wheel of the car, which is very helpful for driving motor vehicles, effectively improving driving safety. Many car models nowadays are equipped with multifunction steering wheels, which have some control buttons for the convenience of the driver. Drivers can use the buttons on the steering wheel to control the vehicle's volume adjustment, mute, song selection, audio source adjustment, answering calls, cruise control, and more.
Was this review help?
16
3
Share
More Forum Discussions

What is the principle of the air brake master cylinder?

Principle of the air brake master cylinder is introduced as follows: When the brake pedal is pressed: The pull rod drives the brake valve arm downward, and the upper end of the brake pin is lowered with the pin shaft as the fulcrum, so that the air inlets of the upper and lower chambers of the brake valve are connected to the air outlets of the chambers respectively. This allows the air in the front and rear chambers of the storage cylinder to enter the front and rear brake chambers through the upper and lower chambers of the brake valve, thereby pushing the brake into operation. When the brake pedal is released: The brake valve connects the brake chamber to the atmosphere to release the brake. The maximum stroke of the parking brake chamber push rod is 10% larger than that of the drive brake push rod. Therefore, when the drive brake push rod has already moved to the maximum stroke, but the brake clearance is too large to achieve full braking, the parking brake chamber can be vented, and the drive brake push rod can be further pushed out with the help of the energy storage spring to achieve full braking.
14
4
Share

How to Determine if a Tire is Leaking Air?

Methods to determine if a tire is leaking air include: 1. Check for damage on the tire sidewall and inner edge. The extent of damage to the tire sidewall can be directly observed, with severe cases showing cracks or bulges. Damage to the inner edge of the tire can only be inspected after removing the tire; 2. Foreign objects puncturing the tire. If the punctured area is hidden, you can sprinkle water on the tire surface. If bubbles appear, it indicates the tire is leaking air; 3. Deformation of the wheel rim flange. If the deformation is not obvious, you need to remove the wheel first, then sprinkle water on the connection area between the tire and the rim. The spot where bubbles form is where the rim deformation causes a hidden leak; 4. Damage to the tire valve. To check the valve, besides looking for cracks on its surface, you can also feel the softness of the valve rubber by touching it with your hand.
17
5
Share

What are the symptoms of a faulty Sylphy water pump?

Sylphy water pump failure may exhibit the following 3 symptoms: 1. Idling issues: The water pump is connected to the belt, drawing cold water from the radiator to cool the engine. If the pump's rotation is problematic, it will directly affect engine speed; 2. Coolant leakage: Most water pump failures result in coolant leakage, caused by aging of the pump's sealing ring. Over-tightening of the engine serpentine belt can also lead to premature pump wear. Failure to replace antifreeze for extended periods may cause internal corrosion, ultimately damaging the pump. Operating beyond its service life without replacement can also cause failure; 3. Engine noise: When opening the hood and starting the engine, if a low grinding noise is heard, it may indicate damaged pump bearings. The automotive engine uses a centrifugal water pump, whose basic structure consists of the pump housing, connecting plate or pulley, pump shaft and bearings or integrated shaft bearings, pump impeller, and seal assembly. It is a major component of the vehicle.
10
5
Share

Where is the fuel tank cap switch for the BMW X1?

The fuel tank cap of the BMW X1 is located on the right side of the vehicle body, with the fuel tank positioned beneath the rear seat chassis. Below are the relevant details: 1. The method to open the fuel tank cap of the BMW X1 is relatively simple—press the fuel tank cap to open it. 2. The BMW X1 uses gasoline of grade ROZ95 or ROZ98 premium gasoline. 3. To achieve optimal fuel consumption, it is recommended to use gasoline that is sulfur-free or contains as little sulfur as possible. 4. The use of fuel labeled as containing metal on the fuel pump is not permitted. 5. Fuels with an ethanol content of up to 25%, such as E10 or E25, can be used. 6. The engine is equipped with an anti-knock control function, allowing the use of different grades of gasoline. 7. The vehicle manufacturer suggests mixing 100 milliliters of an appropriate gasoline additive during each refueling process.
19
0
Share

How to Deal with the EDC Warning Light in Iveco?

EDC warning light indicates a fault in the electronic fuel injection system. When this issue occurs, it is necessary to visit a 4S shop or a professional repair shop for handling. Below are specific details about EDC: 1. EDC stands for Electric Diesel Control, representing the electronic control system for diesel injection. An EDC fault refers to a problem with the high-pressure electronic injection and electronic control system, which can be understood as a type of engine malfunction. Specialized diagnostic equipment is required for inspection and analysis. Do not attempt to loosen or inspect it yourself, as high-pressure fuel line sprays can cause harm. Professional inspection at a repair shop is necessary. 2. An illuminated engine warning light does not pose significant harm to the engine but may increase fuel consumption. Typically, this indicates an issue with the high-voltage circuit of the engine, the fuel injector, or the oxygen sensor circuit. First, check if the high-voltage wires or spark plugs have been affected by car washing, rain, or have come loose.
14
0
Share

How to set the Toyota C-HR to make a sound when locking the car?

Here are the specific steps to set the car to make a sound when locking: 1. First, sit in the driver's seat, press the brake pedal, and keep the gear shift lever in the P position, then release the brake pedal. 2. Then press the one-touch start button twice. Note: There should be a certain interval between these two consecutive presses; if the interval is too short, the car system may not respond. 3. After closing all four doors, press and hold the lock button on the driver's side door for more than 10 seconds. At this point, the setting for the locking beep is completed. Below is the tutorial for replacing the key battery of the Toyota C-HR: 1. Remove the mechanical key. 2. Take off the key cover. Be careful during the removal process to avoid damaging the key. 3. Using a small flat-head screwdriver can make it easier to remove the old battery. 4. Insert the new battery with the positive side facing up. 5. After installing the battery, reassemble the key. 6. Test whether functions like the lock button work properly.
15
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.