What does the SRC button mean?

1 Answers
SanAliyah
07/30/25 6:19am
In a car, SRC refers to the source selection button, which is used to switch between audio sources such as CD, USB, or Bluetooth, or to change songs or radio stations. It functions similarly to a remote control and is typically located on the multifunction steering wheel. The detailed usage of this button can be found in the vehicle's owner's manual. More related information is as follows: 1. Definition of multifunction steering wheel: A multifunction steering wheel has buttons on either side or below the steering wheel for easier operation by the driver. 2. Functions of multifunction steering wheel: The multifunction steering wheel includes controls for audio, air conditioning, hands-free calling, and sometimes even cruise control buttons.
Was this review help?
7
3
Share
More Forum Discussions

Does Beidou's speeding alert result in fines?

Beidou's speeding alert does not result in fines. Here is some knowledge about speeding: 1. Definition: Speeding refers to a driver operating a vehicle at a speed exceeding the legal or regulatory limits. Turbine overspeed accidents are major malignant incidents caused by failures in the turbine's speed regulation and protection systems, as well as inherent defects. 2. Preventive measures: During shutdown, first activate the emergency governor to close the main steam valve and the speed control valve, ensuring the generator's active power is zero. After the current reverses, disconnect the generator. This prevents the generator from being disconnected for too long, as the unit is inoperable during this time. Prolonged periods can cause the exhaust temperature to rise due to windage, increase the differential expansion, and significantly impact the power grid.
4
3
Share

Is pressing the clutch for more than 5 seconds considered coasting in neutral?

During the test, if the car clutch is pressed for 5 seconds without any other accompanying operations, it will be treated as coasting in neutral. Here is more relevant information: 1. Key points of the Subject 3 test: The Subject 3 test involves frequent gear changes. You must press the brake when encountering road signs, red lights, temporary roadside parking, and entering pedestrian crossings. Pressing the brake requires pressing the clutch first. However, the Subject 3 test requires the student to stop the car immediately when intending to brake. This is a test and differs somewhat from real-world driving on the road. Gear shifting also involves pressing the clutch first and then decisively shifting gears without hesitation or keeping the clutch pressed continuously. Avoid the habit of always resting your foot on the clutch pedal. Every part of the test car is equipped with sensors and probes, and all your operations are recorded at all times. If the clutch is pressed for 5 seconds without any other operation, it will be judged as a test failure. 2. Difficulties in the Subject 3 test: Mismatch between speed and gear. You need to be aware of the errors of high gear at low speed and low gear at high speed during the test drive. Before shifting gears, you must increase or decrease the speed to match the gear, and then switch gears! During driving, remember to glance at the speedometer every eight seconds to prevent such errors.
18
3
Share

Why does my driver's license show as locked on 12123?

12123 backup non-motor vehicle review usually does not exceed 7 working days. The following is a related introduction about 12123;1. Definition: Traffic Management 12123 is the official client of the Internet Traffic Safety Comprehensive Service Management Platform, supported by the Traffic Management Research Institute of the Ministry of Public Security. It provides comprehensive traffic safety services for car owners and drivers, including: personal user registration on the Internet service platform, appointment, acceptance and handling of motor vehicle/driver's license/illegal processing and other businesses, traffic safety information inquiry, business notification and reminder, business guidance, road traffic services, etc. 2. Main functions: user registration, binding of personal motor vehicles and driver's licenses, handling of illegal acts recorded by electronic monitoring equipment, appointment for motor vehicle driver's license tests, pre-selection of new motor vehicle license plates.
3
2
Share

Why should ETC be pasted on the dotted area?

ETC should be installed on the dotted area to avoid obstructing the driver's view and to ensure it can detect the toll station's detection equipment. ETC installation positions: For small vehicles such as cars and vans, the ETC card and OBU device should be installed on the upper middle part of the front windshield. For large vehicles like trucks and buses, the installation position is on the lower middle part. ETC installation requirements: The height should be no less than 1.2 meters and no higher than 2.5 meters; the installation angle N should be between 30º and 90º (the angle between the surface of the electronic tag and the horizontal plane). The installation process for ETC devices is as follows: Upon receiving the device, first check if the ETC card and electronic tag (OBU) are damaged. Press the anti-tamper button on the back of the OBU, and the red light will briefly turn on. The OLED screen will display "Tag Invalid" or "Please Insert Card," indicating the device is functioning normally. Clean the front windshield to ensure the surface is smooth, clean, and dry. Then, peel off the protective film on the back of the OBU and stick it to the installation position. Press firmly for 2-3 minutes to remove any air bubbles. Insert the ETC card with the front facing the driver and the back facing the front windshield, ensuring the chip is inserted into the OBU device.
19
4
Share

Can You Drive Away Directly After Remote Starting the Vehicle?

After remote starting, you need to step on the brake, turn the knob, and then drive away. Here is more relevant information: 1. Remote Start: The vehicle starts the engine or motor via signals from the remote key. This entire process eliminates the inconvenience of manually entering the vehicle to operate it. While the engine or motor is running, the central locking system remains in the locked state, providing effective security. Typically, after remote starting, the engine or motor will operate continuously for ten minutes, and if no further instructions are received, it will automatically shut off. 2. Features of Remote Start: (1) High Reliability: Since the remote start of the engine or motor is structurally no different from manual ignition inside the vehicle, there is no issue of mechanical wear on the heater, significantly reducing the likelihood of failure. (2) Convenience: Although remote start cannot be timed like parking heaters, the remote start method is still very convenient. The remote range is usually no less than 50 meters, allowing you to start the engine or motor in advance from home or work if the vehicle is parked in a ground-level parking lot. (3) Automatic Timing: Typically, if no operation is performed after a certain period following a remote start, the engine or motor will automatically shut off, avoiding potential fuel waste from forgetting to turn it off. (4) Full Vehicle Heating: This function, like parking heaters, heats the coolant in the radiator, effectively warming the cabin, engine, and windows.
17
5
Share

In which year was Subject 4 introduced?

Subject 4 was introduced in 2013. Here is more related information: 1. Subject 4: Subject 4, also known as the Subject 4 theory test or driver theory test, is part of the motor vehicle driver's license assessment. After the implementation of the "Order No. 139 of the Ministry of Public Security of the People's Republic of China", the Subject 3 test was divided into two parts. In addition to the road test, a safety and civilization knowledge test, commonly referred to as "Subject 4", was added, which assesses "driving ethics". Because this test is conducted after Subject 3, it is commonly referred to as the Subject 4 test. 2. Subject 4 test content: The main content includes: safe and civilized driving operation requirements, safe driving knowledge under adverse weather and complex road conditions, emergency handling methods for situations such as tire blowouts, and knowledge of post-accident handling.
4
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.