What does the SOS warning light mean?

Can You Still Drive a Shaking Car?

Car shaking is caused by certain component failures, but whether you can continue driving depends on the actual reason for the shaking. Below are some shaking faults that make it unsafe to continue driving: Engine Misfire Shaking: A misfire occurs when one or more cylinders in the engine fail to work properly, resulting in noticeable shaking and noise. There are many causes for engine misfires, with the most common being faults in the ignition or fuel system. A misfire reduces engine power and increases fuel consumption. For a four-cylinder engine, driving with one misfiring cylinder may still be possible, but with two misfiring cylinders, the engine will shake severely and may even stall. Severe Wheel Imbalance Shaking: All car tires undergo dynamic balancing before assembly, but continuous daily use leads to tire wear, causing imbalance. A significant imbalance can result in severe body shaking, drastically reducing the vehicle's handling performance. While driving at low speeds might still be possible, it becomes extremely dangerous at high speeds and may lead to loss of control. Driveshaft Imbalance Shaking: This issue is relatively rare and mostly occurs in rear-wheel-drive and four-wheel-drive vehicles. It happens when the vehicle's chassis has been lifted improperly, causing the driveshaft to deform or loosen, leading to shaking during high-speed rotation. Continuing to drive in this condition can damage the vehicle's transmission and differential.

15

1

Share

What do the gears M+ and M- mean?

Gears M+ and M- refer to the manual mode of an automatic transmission vehicle. In this gear mode, shifting can be done like a manual transmission car, shifting up at high speeds and down at low speeds. Pushing the gear lever to M+ means shifting up one gear, while pushing it to M- means shifting down one gear. Advantages of a manual-automatic transmission car: 1. Faster braking and stopping: When the vehicle is driving at high speed and needs to brake urgently, using the manual method to downshift can slow the vehicle down as quickly as possible. This is easier to master and operate with a manual transmission car, allowing the vehicle to brake and stop faster. 2. Easier exit from turns: Faster cornering. Usually when cornering, you first step on the brake to slow down before entering the turn, then step on the accelerator when about to exit the turn to quickly leave the turn. If you switch to "manual-automatic" mode before entering the turn and downshift to use the engine's traction to control the speed, you can smoothly and safely exit the turn with just a light press on the accelerator when preparing to exit. 3. Reduced brake pad wear: When going downhill, if an automatic transmission car chooses to coast in neutral, it not only harms the car but is also unsafe. If you choose manual mode and use first gear to pull the vehicle, you don't need to keep stepping on the brake, thus reducing wear on the brake pads.

4

Share

What are the National VI Emission Standard Vehicles?

Vehicles meeting the National VI emission standard include SAIC Roewe RX5, Infiniti QX50, Nissan X-Trail, Volkswagen Tayron, Toyota Camry, and other models. Below are the model introductions: Roewe RX5: The new car adopts the brand-new Rhythm Design Pro wing grille. On the side profile, the Roewe RX5 features a full and powerful waistline design, with the prominent peak waistline being the second major element of Roewe's Rhythm Design language. It is equipped with matrix full LED headlights and 18-inch two-tone aluminum alloy wheels, making it even more eye-catching. 2020 Infiniti QX50: As an annual facelift model, the new car has minor changes in its exterior and interior, mainly adjusting the configurations. It is powered by a 2.0T variable compression ratio engine, paired with a CVT transmission. The design follows Infiniti's family language, with the iconic double-arch front grille being simple and elegant, complemented by the Stellar Matrix LED headlights, giving the front face a sculptural aesthetic. 2020 Nissan X-Trail: It retains the powertrain of the current model, equipped with 2.0L and 2.5L naturally aspirated engines. The 2.0L engine delivers a maximum power of 154 horsepower, while the 2.5L engine offers a maximum power of 186 horsepower.

4

Share

What does 20W-50 motor oil mean?

20W-50 is a specification for motor oil, where 20W indicates that the oil can function normally at temperatures as low as -15 degrees Celsius. The 'W' stands for WINTER, and the number before 'W' represents the oil's flow performance at low temperatures—the smaller the number, the better the starting performance in cold conditions. The number 50 represents the oil's viscosity and flow characteristics, meaning the number after 'W' indicates the oil's stability at high temperatures (i.e., its resistance to thinning). A higher number signifies better high-temperature stability. Functions of motor oil: Motor oil lubricates the engine to reduce friction, aids in cooling, provides sealing to prevent leaks, protects against rust and corrosion, and acts as a shock absorber. It is often referred to as the 'blood' of a car. Choosing the right oil and changing it regularly helps maintain the engine in good condition and extends its lifespan. Selecting motor oil: When choosing motor oil, the most expensive option isn't necessarily the best. Instead, the correct approach is to select oil based on the characteristics of the car's engine and the driver's habits. Oil can be categorized by its suitability for winter or summer use. For winter, the primary consideration is the low-temperature viscosity grade, while in summer, due to higher temperatures, an oil with excellent low-temperature viscosity performance is not required.

1

5

Share

What Are the Reasons Why the Passenger Door Won't Open?

Introduction to the reasons why the passenger door won't open: Central locking system is activated: When the door won't open, you can first use the car key to unlock and then lock it again, repeating this twice. Then locate the central locking button on the left front door trim of the driver's side and press the unlock button. Try opening the stuck door again to see if it works. This is one of the reasons why a door might not open. Child lock is activated: When closing the door, always check if the child lock is turned off. If the door won't open, use a flathead screwdriver to turn the child lock to the off position. Door lock cable malfunction: When this issue occurs, the door cannot be opened from the inside because the malfunctioning cable directly affects the lock mechanism. Door hinges or lock post deformation: After the door is subjected to external force, the hinges or lock post may become deformed, which is another reason why the door might not open. Door limiter failure: When this problem occurs, opening the door becomes very difficult or impossible. The solution is to replace the door limiter with a new one to restore smooth operation. Door frozen: In winter, cold weather can easily freeze the door. Sometimes even the door lock mechanism freezes, making the door impossible to open. To fix this, park the car in sunlight or use a heat lamp to thaw the frozen door.

17

5

Share

What Causes the Wuling Zhiguang's Radiator to Frequently Boil Over?

The frequent boiling over of the Wuling Zhiguang's radiator may be caused by several factors, including a faulty engine thermostat that fails to open, insufficient coolant, a malfunctioning engine water pump, a clogged radiator, or a non-functioning cooling fan. It is recommended to visit a 4S shop or an auto repair shop to diagnose the specific issue. The detailed reasons are as follows: Reduced Heat Exchange Efficiency: Issues such as a damaged thermostat, a faulty electric fan, or low coolant levels in the cooling system can prevent the coolant in the radiator from cooling down, leading to a rise in water temperature. When the boiling point of water is reached, a large number of bubbles form, occupying part of the radiator's surface area. This results in severe coolant depletion around the cylinder walls, even if there is still coolant in the radiator. Without sufficient coolant around the cylinder walls to dissipate heat, heat exchange efficiency is significantly reduced, making it impossible to transfer heat from the cylinders to the radiator. High-Load Driving: When the temperature inside the cylinders rises rapidly, continued high-load driving without timely heat dissipation can weaken components such as pistons, piston rings, and connecting rods, potentially causing deformation. These parts may then fail to withstand normal loads, and the normal gaps between components can be disrupted, preventing the formation of proper oil films. In mild cases, this can lead to engine cylinder or bearing damage; in severe cases, the entire engine may be damaged or even rendered unusable.

9

0

Share

What does the SOS warning light mean?

Can You Still Drive a Shaking Car?

What do the gears M+ and M- mean?

What are the National VI Emission Standard Vehicles?

What does 20W-50 motor oil mean?

What Are the Reasons Why the Passenger Door Won't Open?

What Causes the Wuling Zhiguang's Radiator to Frequently Boil Over?

Can You Bring Cured Meat on the Highway?

What Causes the Noise from New Car Wiper Blades?

What brand is the transmission for the Tiggo 8?

Where to Get Power for Installing Air Conditioning in a Heavy Truck?