What does the small wrench symbol on the XRV dashboard mean?

2 Answers
DiSophia
07/25/25 12:30pm
The appearance of the wrench symbol indicates that the vehicle is due for maintenance. Below is relevant information about the Honda XRV: 1. Exterior: The Dongfeng Honda XRV is the second model derived from the Honda CONCEPT V and shares the same platform as the GAC Honda Vezel. Its overall design exudes a strong sense of dynamism and is very stylish, perfectly catering to the tastes of young people. In terms of dimensions, the XRV measures 4275/1770/1605mm in length, width, and height, with a wheelbase of 2610mm, identical to that of the GAC Honda Vezel. 2. Powertrain: The new vehicle offers a choice between a 1.8L naturally aspirated engine or a 1.5L Earth Dreams engine. The former delivers a maximum power of 136Ps. The transmission options include a 6-speed manual gearbox or a CVT transmission.
Was this review help?
15
2
Share
VanIsla
08/11/25 8:21pm
I've been driving for over a decade and know dashboard icons like the back of my hand. That little wrench symbol on the XRV is actually a maintenance reminder light—it comes on when your car needs routine service. Most Honda models have this system that automatically calculates service intervals based on mileage or time, like needing an oil change and air filter check around 5,000 kilometers. Just last week, I saw the wrench light flash while driving and immediately took it to the dealership. The technician found the oil level was too low, replaced it, and reset the icon—you just hold down the steering wheel button for a few seconds while starting the car. But honestly, beginners shouldn't tinker with it; leave it to the pros. Staying on top of maintenance makes your car last longer, especially in winter when engines are prone to issues. Delaying repairs can double the costs, which just isn't worth it.
Was this review help?
5
5
Share
Expand All
More Forum Discussions

What Are the Possible Causes of Vehicle Pulling to One Side?

Possible causes of vehicle pulling to one side are as follows: 1. Unequal tire pressure on both sides. Unequal tire pressure can cause tires to become different in size, leading to vehicle pulling during rolling. 2. Deformation of front shock absorber springs with inconsistent cushioning on both sides. The condition of the shock absorber springs can be judged by pressing or comparing after removal. 3. Failure of front shock absorbers. After failure, the vehicle's suspension will be uneven in height during driving, resulting in uneven force distribution and causing the vehicle to pull to one side. 4. Poor return or incomplete separation of a wheel's brake. This is equivalent to applying partial braking on one side continuously, causing the vehicle to pull to one side during driving.
8
1
Share

How to Check Rearview Mirrors When Changing Lanes at Night?

Judge the distance between vehicles based on the size and intensity of the headlights from the following car reflected in the rearview mirror. The closer the car is, the brighter the headlights will appear. Lane-changing techniques: 1. Always use turn signals before changing lanes: When changing lanes at night, activate the turn signal in advance to alert other vehicles. 2. Observe vehicles ahead and to the side/rear: Check the traffic conditions around your car via the rearview mirror to ensure it is safe before proceeding. While observing the rearview mirror, also check for any vehicles in the blind spots on both sides of your car. Once confirmed safe, prepare to change lanes. 3. Steer gently and change lanes swiftly: Avoid turning the steering wheel too quickly when changing lanes, as rapid steering at high speeds may increase the risk of rollover. Do not hesitate when changing lanes; proceed immediately once safety is confirmed. 4. Change lanes early to avoid obstacles: If encountering an obstacle ahead, change lanes in advance to prevent interference from vehicles in adjacent lanes, which could lead to braking or forced lane changes causing collisions.
18
4
Share

What does 'sport' displayed on the car mean?

sport refers to the sport mode, which is used to increase power output and deliver higher torque. Here are the detailed explanations: 1. The sport mode is more effective when climbing slopes or overtaking. It can also be used during high-speed driving. Additionally, the high engine speed in sport mode helps to remove carbon deposits from the engine. 2. When the car is in sport mode, the electronic control unit increases the engine speed, ensuring the vehicle maintains sufficient torque for quick acceleration and deceleration. This allows the car's performance to be fully showcased, and the previously unexperienced 'pushing-back sensation' will be immediately noticeable.
13
1
Share

What maintenance should be done when a car reaches 20,000 kilometers?

At the 20,000-kilometer mark, the primary maintenance tasks for a car include changing the engine oil, replacing the air filter, replacing the cabin air filter, and replacing the oil filter, among others. The focus is on replacing wear-prone components and fluids such as power steering fluid, as well as checking the remaining lifespan of certain parts. Here are the details: 1. Vehicle maintenance mainly involves replacing wear-prone components and fluids. 2. Wear-prone components of a car include brake pads, tires, wiper blades, brake discs, various filters, spark plugs, ignition coils, etc. 3. The fluids in a car include engine oil, transmission fluid, coolant, brake fluid, and power steering fluid, among others. 4. During car maintenance, it is recommended that owners check the moisture content of the brake fluid. Since brake fluid is highly prone to absorbing water, if the moisture content exceeds 3%, it should be replaced immediately. 5. Additionally, the remaining lifespan of wear-prone components should also be inspected. Tires, in particular, are made of rubber. Over time, tires will age, typically requiring replacement every four years. However, for frequent drivers, it is advisable to shorten the replacement cycle.
1
1
Share

Which company does NIO vehicle models belong to?

NIO vehicles belong to NIO Inc., which is registered in Shanghai. 1. The company has invited Martin Leach, a former executive of Ford and Maserati, to serve as president. 2. The company is mainly responsible for the research, development, and design of vehicles, while the manufacturing process is outsourced to the traditional automotive industry. NIO is committed to creating a joyful lifestyle for users by providing high-performance intelligent electric vehicles and user experiences, aiming to build a global user enterprise. 3. By offering high-performance intelligent electric vehicles and ultimate user experiences, NIO is dedicated to creating a joyful lifestyle for users and establishing a global 'user brand'.
10
3
Share

How to Adjust the Headlights of Hyundai Elantra?

Modern Elantra headlight adjustment method is as follows: 1. The headlight height control knob is located on the left side of the center console; 2. The knob can adjust a total of four gears: 0, 1, 2, and 3; 3. Adjust the headlight height knob to the "0" gear, this gear has the highest headlight height and is used when carrying fewer people; 4. Adjust the headlight height knob to the "1" gear, this gear has a relatively high headlight height; 5. Adjust the headlight height knob to the "2" gear, this gear has a relatively low headlight height; 6. Adjust the headlight height knob to the "3" gear, this gear has the lowest headlight height and is used when carrying more people.
18
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.