···
Log in / Register

What does the small wrench on the xrv dashboard mean?

4 Answers
VonBrantley
08/28/25 8:18am

xrv dashboard has a small wrench indicating that the car needs maintenance. There are 3 maintenance taboos: 1. Avoid poor ventilation: Do not run the engine for a long time in an unventilated garage. The exhaust gas from the engine contains carbon monoxide. Prolonged exposure to low concentrations of carbon monoxide can cause headaches, shortness of breath, nausea, vomiting, weakness, dizziness, mental confusion, and even brain damage; 2. Avoid contact with carburetor cleaner: Most carburetor cleaners contain methyl chloride, aromatic compounds, and ethanol. Inhaling these substances or getting them on the skin and eyes can pose safety hazards; 3. Avoid mechanical injuries: When performing maintenance operations, clear work signs should be set up; when starting the car, pay attention to the gear position of the transmission to prevent accidental movement that could cause injury; when working under the engine hood, ensure others leave the driver's seat to prevent accidental injury from sudden engine movement or operation of controls by others.

Was this review help?
3
3
Share
VanJameson
09/10/25 6:25am

When I saw the little wrench icon on my XR-V's dashboard, I immediately understood—it's actually the vehicle's maintenance reminder signal. Honda cars are all designed this way, indicating that the preset mileage or time interval has been reached, and it's time for routine maintenance. Last time my car displayed this, I overlooked it, which resulted in engine carbon buildup issues and cost me a significant amount in repairs. So now, the moment I see it, I schedule an appointment with the 4S dealership to check basic items like engine oil, filters, and the braking system—typically every 5,000 to 10,000 kilometers. Remember, don’t ignore it; it’s simply reminding us to care for our beloved cars to prevent minor issues from escalating into major failures. Regular maintenance ensures the car runs longer, more efficiently, and saves fuel and money in the long run.

Was this review help?
11
1
Share
Expand All
StAaliyah
10/24/25 7:16am

When I first bought my car, I was startled by the little wrench icon on the dashboard and thought the car was broken. Later, I asked a friend and learned it was just a maintenance reminder, not an emergency fault. The XR-V's system is quite smart—it calculates whether you need an oil change or parts inspection based on usage. Since I drive less daily, it lights up when the time comes. I quickly drove to the service center, where they reset the icon and gave some maintenance tips, like checking the AC system before seasonal changes. Don’t worry, handling this is quick and costs just a few hundred bucks—no need to panic like I did and delay your driving.

Was this review help?
3
2
Share
Expand All
DelHector
12/07/25 7:40am

The little wrench light on my XR-V is just a time reminder, indicating it's time for maintenance. I checked the owner's manual and found it corresponds to routine maintenance cycles, such as oil changes and air filter replacements—not major issues but shouldn't be delayed. I usually book an appointment at a nearby garage in advance, and the inspection takes about 20 minutes, costing around 200 yuan. Long-term neglect might accumulate issues affecting the car's performance, so regular maintenance is the most worry-free approach.

Was this review help?
4
3
Share
Expand All
More Forum Discussions

Where is the air pump located in a car?

The location of the air pump varies for each car model. For example, in the Audi Q5L, the spare tire air pump is located under the trunk luggage cover panel. Generally, vehicles store it under the luggage cover panel. Introduction to automotive air pumps: Automotive air pumps, also known as inflators or air compressors, operate through the functioning of an internal motor. The principle involves the motor running: when air is drawn in, the valve of the connecting pipe is pushed open by atmospheric pressure, allowing air to enter the cylinder. When pumping air into the tire, the valve is closed by the pressure inside the cylinder, directing the air into the tire. This essentially utilizes atmospheric pressure to inflate cars, balls, and rubber boats. Applicable vehicle types for air pumps: These portable car air pumps are generally only suitable for small cars and cannot be used for large buses or trucks to prevent insufficient pressure, which could lead to hazards.
12
3
Share

How Often Should the Car Oil Filter Be Replaced

The replacement cycle of the oil filter is determined by the oil change cycle: 1. If mineral oil is used, the oil filter should be replaced every 5,000 kilometers along with the oil. 2. If full synthetic oil is used, the oil filter should be replaced approximately every 10,000 kilometers along with the oil. The gasoline filter, also known as the fuel filter, should be replaced as follows: 1. Under normal driving conditions, it is recommended to replace it every 30,000 kilometers. If the fuel quality is poor, the replacement cycle should be shortened to every 20,000 kilometers. 2. If the car is used carefully, the fuel quality is excellent, and the car is well-maintained, it can be replaced every 70,000 to 80,000 kilometers, but it is best not to exceed 100,000 kilometers. 3. The gasoline filter is usually replaced during a major car service, along with the air filter and oil filter.
10
2
Share

What Causes Throttle Noise?

Throttle noise is caused by a malfunction in the throttle body. Here is an introduction to the throttle body: 1. Overview: The throttle body is a controllable valve that regulates air intake into the engine. After entering the intake manifold, the air mixes with gasoline to form a combustible mixture, which then ignites to generate power. 2. Maintenance Methods: (1) Gas Release: Engine oil tends to volatilize under heat during use. The longer the usage period and the higher the temperature, the stronger the volatilization. Additionally, some compressed gas from the cylinder will inevitably squeeze into the crankcase through piston ring gaps. Therefore, a passage must be provided to release this gas; otherwise, positive pressure will form in the oil pan. (2) Negative Pressure Extraction: The crankcase ventilation tube connects to the throttle body partly due to environmental requirements and partly to utilize the intake's negative pressure to extract gas from the crankcase. (3) Cleaning Frequency: How quickly the throttle body gets dirty depends on factors such as engine operating temperature and driving habits.
9
0
Share

What is the correct way to use fuel additive?

The correct method of using fuel additive is to add it before refueling. First, pour the fuel additive into the tank, then add gasoline. This allows the pre-added fuel additive to mix thoroughly and evenly under the impact of gasoline injection, achieving optimal results. Follow these steps to add fuel additive: 1. Add the fuel additive to an almost empty fuel tank before refueling. Typically, 60ml can be mixed with 30-60L of gasoline. Note: If the tank capacity exceeds 60L, two bottles of fuel additive (standard specification: 60ml/bottle) are required. 2. Avoid excessive use. The standard for overuse is adding more than 5 bottles (60ml/bottle) per tank of fuel. Insufficient gasoline dilution may reduce effectiveness. 3. A usage cycle consists of 6 applications, with 12 applications representing an excellent cycle. It is recommended to add one bottle before each refueling to maintain the vehicle in optimal condition.
16
0
Share

The Difference Between 4WD and 6WD Vehicles?

4WD vehicles have four driving wheels (two front and two rear), while 6WD vehicles have six driving wheels. 4WD Vehicles: Simply put, these are vehicles with front and rear differential-linked four-wheel drive. Since engine power is transmitted to all four wheels, all four can provide traction. In regular 2WD vehicles, if one driving wheel slips, the other driving wheels also lose power, rendering the vehicle immobile. With 4WD, the remaining two wheels can still deliver traction. Consequently, 4WD vehicles excel in off-road performance, handling wilderness slopes, beaches, mud, and deserts with ease. This unstoppable rugged style has won many automotive enthusiasts' hearts. 6WD Vehicles: For some car enthusiasts, four-wheeled vehicles no longer suffice. Hence, modified 6WD vehicles emerged, featuring four rear wheels and two front wheels with front/rear differential-linked six-wheel drive, enabling all six wheels to deliver power.
10
1
Share

Why does the engine make a whining sound after the car is turned off?

It is normal for the engine to make a whining sound after the car is turned off. Here are some precautions to take when turning off the car: 1. Do not remove external devices after turning off the car: There are too many external devices in the car, and often the phone continues to charge after the engine is turned off. This is similar to listening to music, as both are drawing power from the remaining battery. If the battery is drained, it may cause the vehicle to fail to start. 2. Frequently starting the vehicle after turning it off: Repeatedly performing this back-and-forth operation can damage the vehicle's engine and some equipment. 3. Start-stop: The purpose of start-stop technology is to reduce fuel consumption. When the vehicle is waiting at a traffic light, the engine will be turned off to reduce fuel consumption and achieve a more economical fuel condition.
3
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.