What does the small wrench on the dashboard of the 10th-generation Accord mean?

1 Answers
LaMiranda
07/30/25 8:53am
The appearance of a small wrench on the dashboard of the 10th-generation Accord is a maintenance reminder indicator. Below is a relevant introduction to car maintenance: 1. Air Filter: The engine needs to intake a large amount of air during operation. If the air is not filtered, the dust in it can accelerate the wear of the piston group and cylinder. Larger particles entering between the piston and cylinder can also cause severe "cylinder scoring." The function of the air filter is to remove dust and particles from the air, ensuring that sufficient and clean air enters the cylinder. 2. Fuel Filter: The function of the fuel filter is to provide clean fuel to the engine, filtering out moisture and impurities in the gasoline. This optimizes engine performance and provides the best protection for the engine. During car maintenance, the service personnel will perform other inspections based on the specific condition of the vehicle and may add other maintenance items, such as inspection, cleaning, and maintenance of the engine-related systems, tire alignment checks, inspection of various fastening components, etc.
Was this review help?
7
0
Share
More Forum Discussions

What to Do When the Passat Key Won't Insert?

In winter, a common issue is the keyhole freezing due to extremely cold weather. Try heating the metal part of the key with a lighter, which should allow the key to insert. Be careful not to damage the key. Check if the key matches the car: Ensure the key belongs to the vehicle and inspect the keyhole for any foreign objects. Check if the key is deformed. It might have been tampered with, or the lock could be damaged. You can try lubricating it with pencil graphite and check for any blockages. If all else fails, consider replacing the lock. Check if the steering wheel is locked: If the key won't turn and the car won't start after inserting the key, first check if the steering wheel is automatically locked. This is part of the car's anti-theft system, where the steering wheel locks when turned to a certain extent and remains fixed within a range. Without inserting the key and turning the steering wheel simultaneously, the key won't turn. So, if the car won't start after inserting the key, check if the steering wheel is locked. If it is, turning the steering wheel while turning the key should resolve the issue.
5
2
Share

What is the curb weight of the Chery Flagcloud 1?

Chery Flagcloud 1 sedan has a curb weight of 990 kg. Introduction to Flagcloud: It is a sporty family sedan launched by Chery Automobile in 2003, initially with a displacement of 1.6L. In 2005 and later, the Flagcloud series expanded to include 1.3L and 1.5L models, enriching Chery's product lineup. The Flagcloud is one of Chery's best-selling main models, and Chery also has the Chery Star series. The selling point of the Chery Flagcloud is its "2002 World's Top 10 Best Engines," which is unmatched in the domestic same-class sedan market. Fuel consumption of Flagcloud: Its outstanding advantage is its strong power combined with ultra-low fuel consumption. According to statistics, the "Flagcloud Star" (originally the Flagcloud Sport version) has a fuel consumption of about 6 liters per 100 kilometers under urban driving conditions. In the "Urban Road Fuel Economy Competition" held by Beijing TV's "I Love My Car" program in 2005, the participants' results did not exceed 5 liters per 100 kilometers, with the best result being only 4.25 liters per 100 kilometers.
3
1
Share

What are the reasons why the Baojun dashboard lights up completely but fails to start when powered on?

Dashboard indicator lights fully illuminated but failure to start may be caused by insufficient fuel pressure or incorrect throttle position sensor signal. Reasons for dashboard lights fully illuminated but failure to start: Possible causes include insufficient fuel pressure, incorrect throttle position sensor signal, poor fuel pump performance, or faulty spark plugs. Other reasons: Apart from improper human operation, dashboard lights fully illuminated but failure to start could also be due to motor failure, fuel pump supply issues, injector problems, or sensor malfunctions. These complex situations require professional handling. Precautions: Regular attention to the following items can prevent these complex situations. First, fuel quality issues. Opening the tank may reveal water and mud - using such contaminated fuel will inevitably damage the vehicle. Owners are reminded to always refuel at authorized gas stations. When traveling, use a gauze filter over the fuel nozzle to remove impurities. Second, lack of antifreeze. Some owners use water or substandard antifreeze, which in extremely cold winter conditions can freeze the entire cooling system, crack the engine block, render the water pump inoperable, prevent starting, and damage other engine components.
17
5
Share

Where is the rearview mirror heating button located on the Geely Emgrand GS?

Geely Emgrand GS's rearview mirror heating button is located on the air conditioning panel, to the right of the recirculation button. The rearview mirror heating function refers to the ability of the exterior rearview mirrors to be heated by electric heating wires embedded behind the mirror surfaces when driving in rainy, snowy, or foggy weather, ensuring clear visibility on the mirror surfaces. Rearview mirror heating switch: Knob-type switch: On the driver's side door, there is a knob on the left front with several symbols, namely L, 0, R, and a heating symbol. The heating symbol represents the rearview mirror heating switch, which is shaped like a square frame with three upward-curving arrows inside. Turning the knob to the heating symbol activates the rearview mirror heating function. Button-type switch: On the control panel, shaped like a square frame with three upward-curving arrows inside. Pressing the button activates the rearview mirror heating function. Principle of rearview mirror heating: Electric heating elements (heating films) are installed inside the mirrors on both sides. In rainy or snowy weather, when the owner turns on the rearview mirror heating function, the heating elements quickly heat up to a fixed temperature within a few minutes, usually between 35-60 degrees Celsius, thereby heating the mirror surfaces to remove fog and frost.
6
2
Share

Does Installing Ambient Lighting Damage a Mercedes-Benz?

In fact, adding ambient lighting later is definitely considered a modification of the electrical system, which can easily lead to circuit faults and affect the vehicle's warranty. Impact of Installing Ambient Lighting in a Mercedes-Benz: There isn’t much significant impact. Nowadays, ambient lighting can be powered through the cigarette lighter, and generally, it can be installed without cutting the wires. Even if connected to the battery, it’s not a big issue. It looks quite upscale at night, and if you like it, you can install it. If a Mercedes-Benz is fitted with ambient lighting later, the effect inside the car at night is excellent. However, the main concern is that it may have some impact on the car’s electrical system, potentially leading to circuit faults. Upgrading and Installing Ambient Lighting Later: Currently, car interiors are becoming more luxurious. Many luxury cars or high-end models of ordinary brands come equipped with ambient lighting, which gives a premium feel when driving at night. For models without ambient lighting, owners can choose to upgrade and install it later. However, when adding ambient lighting, attention should be paid to aesthetics and the stability of quality. After all, installing ambient lighting involves modifying the electrical system, so it’s best to find a professional automotive lighting modification shop. Choose high-quality ambient lights and experienced, professional technicians for installation. Additionally, the brightness of the ambient lighting should not be too glaring, as it could affect driving safety.
14
2
Share

What does the exclamation mark warning light on the Haval H9 indicate?

When an exclamation mark appears on the car dashboard, there are five possible scenarios: general fault, automatic transmission fault, brake system fault, abnormal tire pressure, or lighting system fault. Below is a detailed analysis of each situation: General Fault: An exclamation mark inside a triangle indicates a malfunction in the vehicle's general performance, components, or functions. Common causes include parking sensor failure, fuel cutoff system intervention or malfunction, external light failure, or engine oil pressure sensor issues. It is recommended to visit a 4S shop for inspection to identify the source of the fault. Automatic Transmission Fault: An exclamation mark inside a yellow gear symbol is the automatic transmission warning light, indicating a transmission fault or low transmission fluid level. Transmission fluid should be replaced promptly. Brake System Fault: An exclamation mark inside a circled parenthesis indicates a brake system warning, typically due to brake system malfunction or low brake fluid level. Immediate inspection of the brake system is necessary to avoid accidents. Abnormal Tire Pressure: An exclamation mark below a horizontal line inside a parenthesis represents the tire pressure monitoring warning light, which illuminates when tire pressure is too low. Check the tire pressure and adjust it to the normal range. Lighting Fault: A yellow bulb with an exclamation mark is the lighting fault indicator, signaling a malfunction in one of the vehicle's lights. Solution: Visit a 4S shop for inspection as soon as possible, or conduct a self-check focusing on commonly used bulbs such as turn signals, fog lights, and interior lights to identify the issue.
20
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.